|
|
F.S. 85 GM DANA 60, 1ton 4x4 AXLES, 4.56 gears, Detroit Locker. in NH,ME
Hi
We recently bought some nice US MILITARY SURPLUS 1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) These are the militarized versions of the standard civilian pickups and blazers (camo paint, reenforced frames, gun mounts, radio mounts, 24 volt, special towing and lifting equipment). We are parting some of them out in Southern Maine, and Southern NH. We have all types of parts available EXCEPT ENGINES FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL THESE) Most of these vehicles are RUST FREE or have very little rust. We have been selling many parts to restore civilian trucks, or restore the military version. PARTS FIT: 1981-87 PICKUPS 1981-90 BLAZERS, SUBURBANS Some parts can be adapted to other vehicles like AXLES. SOME PARTS FOR SALE A 1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. $1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS might be available seperatly. 1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). GM 10 bolt (is the front DANA 44?, somwe people have said yes??) 3.08 gears, disk breaks in front, drum in rear. locking hubs. bent tie rod , only $200.00 set straight tie rod $250.00 set GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) PERFECT FRONT FENDERS $75.00 COMPLETE DOORS WITH GLASS $150.00 RADIATOR SUPPORTS 25.00 PICKUP CABS $300.00 - $500.00 PICKUP TAILGATES $150.00 FRONT GRILL GUARDS (MILITARY) $75.00 FRONT BUMPERS 75.00 REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 STRIPPED BLAZER TAILGATES $100-150.00 RUST FREE PICKUP BEDS WITH DENTS, ASK! RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) " " " (WITH GLASS $100.00) Some other parts such as all the military accesories, seats, instruments, drive train, etc, ASK, ASK, ASK 208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, With assorted other parts, WITH paperwork to register. About $1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) Anyway these are a few of the parts we're selling off these vehicles. remember, rust free parts with dents are less. (rusted stuff going to scrap pile). So, just tell us what part you need. and we'll reply. SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS Reply to REMOVE,REMOVE from the return address to reply. Thanks for your time. Ron |
OOPS
left out that these are CHEVY'S parts fit, Chevy, GMC trucks >Hi >We recently bought some nice US MILITARY SURPLUS >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) >These are the militarized versions of the standard civilian pickups >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, >24 volt, special towing and lifting equipment). > >We are parting some of them out in Southern Maine, and Southern NH. > >We have all types of parts available EXCEPT ENGINES >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL >THESE) >Most of these vehicles are RUST FREE or have very little rust. >We have been selling many parts to restore civilian trucks, or >restore the military version. > >PARTS FIT: >1981-87 PICKUPS >1981-90 BLAZERS, SUBURBANS >Some parts can be adapted to other vehicles like AXLES. > >SOME PARTS FOR SALE A > >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS >might be available seperatly. > >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) >3.08 gears, disk breaks in front, drum in rear. locking hubs. >bent tie rod , only $200.00 set >straight tie rod $250.00 set > >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) >PERFECT FRONT FENDERS $75.00 >COMPLETE DOORS WITH GLASS $150.00 >RADIATOR SUPPORTS 25.00 >PICKUP CABS $300.00 - $500.00 >PICKUP TAILGATES $150.00 >FRONT GRILL GUARDS (MILITARY) $75.00 >FRONT BUMPERS 75.00 >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 >STRIPPED BLAZER TAILGATES $100-150.00 >RUST FREE PICKUP BEDS WITH DENTS, ASK! >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) > " " " (WITH GLASS $100.00) > >Some other parts such as all the military accesories, seats, >instruments, drive train, etc, ASK, ASK, ASK > >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 > >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, >With assorted other parts, WITH paperwork to register. About >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) > >Anyway these are a few of the parts we're selling off these vehicles. >remember, rust free parts with dents are less. (rusted stuff going to >scrap pile). > >So, just tell us what part you need. and we'll reply. >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS > >Reply to >REMOVE,REMOVE from the return address to reply. > >Thanks for your time. >Ron > |
OOPS
left out that these are CHEVY'S parts fit, Chevy, GMC trucks >Hi >We recently bought some nice US MILITARY SURPLUS >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) >These are the militarized versions of the standard civilian pickups >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, >24 volt, special towing and lifting equipment). > >We are parting some of them out in Southern Maine, and Southern NH. > >We have all types of parts available EXCEPT ENGINES >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL >THESE) >Most of these vehicles are RUST FREE or have very little rust. >We have been selling many parts to restore civilian trucks, or >restore the military version. > >PARTS FIT: >1981-87 PICKUPS >1981-90 BLAZERS, SUBURBANS >Some parts can be adapted to other vehicles like AXLES. > >SOME PARTS FOR SALE A > >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS >might be available seperatly. > >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) >3.08 gears, disk breaks in front, drum in rear. locking hubs. >bent tie rod , only $200.00 set >straight tie rod $250.00 set > >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) >PERFECT FRONT FENDERS $75.00 >COMPLETE DOORS WITH GLASS $150.00 >RADIATOR SUPPORTS 25.00 >PICKUP CABS $300.00 - $500.00 >PICKUP TAILGATES $150.00 >FRONT GRILL GUARDS (MILITARY) $75.00 >FRONT BUMPERS 75.00 >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 >STRIPPED BLAZER TAILGATES $100-150.00 >RUST FREE PICKUP BEDS WITH DENTS, ASK! >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) > " " " (WITH GLASS $100.00) > >Some other parts such as all the military accesories, seats, >instruments, drive train, etc, ASK, ASK, ASK > >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 > >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, >With assorted other parts, WITH paperwork to register. About >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) > >Anyway these are a few of the parts we're selling off these vehicles. >remember, rust free parts with dents are less. (rusted stuff going to >scrap pile). > >So, just tell us what part you need. and we'll reply. >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS > >Reply to >REMOVE,REMOVE from the return address to reply. > >Thanks for your time. >Ron > |
Are the 1 ton frames full sized 8 foot box frames?
Or, are they the shortened military frames, that used the cut off box? Please reply in group, as I can't get an e-mail through your address, even with removing the REMOVE. Thank you, Refinish King PS Are the front Dana 60's set up for Budd wheels with Dual Rear Wheels, or single rear wheels? The price sounds kind of high, but maybe if they're not full of Arabic sand and no bomb parts. I might be interested. "MilitaryTruckParts" > wrote in message ... > OOPS > left out that these are CHEVY'S > parts fit, Chevy, GMC trucks > > > >Hi > >We recently bought some nice US MILITARY SURPLUS > >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) > >These are the militarized versions of the standard civilian pickups > >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, > >24 volt, special towing and lifting equipment). > > > >We are parting some of them out in Southern Maine, and Southern NH. > > > >We have all types of parts available EXCEPT ENGINES > >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL > >THESE) > >Most of these vehicles are RUST FREE or have very little rust. > >We have been selling many parts to restore civilian trucks, or > >restore the military version. > > > >PARTS FIT: > >1981-87 PICKUPS > >1981-90 BLAZERS, SUBURBANS > >Some parts can be adapted to other vehicles like AXLES. > > > >SOME PARTS FOR SALE A > > > >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. > >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, > >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT > >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. > >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS > >might be available seperatly. > > > >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). > >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) > >3.08 gears, disk breaks in front, drum in rear. locking hubs. > >bent tie rod , only $200.00 set > >straight tie rod $250.00 set > > > >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) > >PERFECT FRONT FENDERS $75.00 > >COMPLETE DOORS WITH GLASS $150.00 > >RADIATOR SUPPORTS 25.00 > >PICKUP CABS $300.00 - $500.00 > >PICKUP TAILGATES $150.00 > >FRONT GRILL GUARDS (MILITARY) $75.00 > >FRONT BUMPERS 75.00 > >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) > >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 > >STRIPPED BLAZER TAILGATES $100-150.00 > >RUST FREE PICKUP BEDS WITH DENTS, ASK! > >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS > >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) > > " " " (WITH GLASS $100.00) > > > >Some other parts such as all the military accesories, seats, > >instruments, drive train, etc, ASK, ASK, ASK > > > >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 > > > >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, > >With assorted other parts, WITH paperwork to register. About > >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) > > > >Anyway these are a few of the parts we're selling off these vehicles. > >remember, rust free parts with dents are less. (rusted stuff going to > >scrap pile). > > > >So, just tell us what part you need. and we'll reply. > >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS > > > >Reply to > > >REMOVE,REMOVE from the return address to reply. > > > >Thanks for your time. > >Ron > > > |
Are the 1 ton frames full sized 8 foot box frames?
Or, are they the shortened military frames, that used the cut off box? Please reply in group, as I can't get an e-mail through your address, even with removing the REMOVE. Thank you, Refinish King PS Are the front Dana 60's set up for Budd wheels with Dual Rear Wheels, or single rear wheels? The price sounds kind of high, but maybe if they're not full of Arabic sand and no bomb parts. I might be interested. "MilitaryTruckParts" > wrote in message ... > OOPS > left out that these are CHEVY'S > parts fit, Chevy, GMC trucks > > > >Hi > >We recently bought some nice US MILITARY SURPLUS > >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) > >These are the militarized versions of the standard civilian pickups > >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, > >24 volt, special towing and lifting equipment). > > > >We are parting some of them out in Southern Maine, and Southern NH. > > > >We have all types of parts available EXCEPT ENGINES > >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL > >THESE) > >Most of these vehicles are RUST FREE or have very little rust. > >We have been selling many parts to restore civilian trucks, or > >restore the military version. > > > >PARTS FIT: > >1981-87 PICKUPS > >1981-90 BLAZERS, SUBURBANS > >Some parts can be adapted to other vehicles like AXLES. > > > >SOME PARTS FOR SALE A > > > >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. > >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, > >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT > >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. > >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS > >might be available seperatly. > > > >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). > >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) > >3.08 gears, disk breaks in front, drum in rear. locking hubs. > >bent tie rod , only $200.00 set > >straight tie rod $250.00 set > > > >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) > >PERFECT FRONT FENDERS $75.00 > >COMPLETE DOORS WITH GLASS $150.00 > >RADIATOR SUPPORTS 25.00 > >PICKUP CABS $300.00 - $500.00 > >PICKUP TAILGATES $150.00 > >FRONT GRILL GUARDS (MILITARY) $75.00 > >FRONT BUMPERS 75.00 > >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) > >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 > >STRIPPED BLAZER TAILGATES $100-150.00 > >RUST FREE PICKUP BEDS WITH DENTS, ASK! > >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS > >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) > > " " " (WITH GLASS $100.00) > > > >Some other parts such as all the military accesories, seats, > >instruments, drive train, etc, ASK, ASK, ASK > > > >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 > > > >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, > >With assorted other parts, WITH paperwork to register. About > >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) > > > >Anyway these are a few of the parts we're selling off these vehicles. > >remember, rust free parts with dents are less. (rusted stuff going to > >scrap pile). > > > >So, just tell us what part you need. and we'll reply. > >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS > > > >Reply to > > >REMOVE,REMOVE from the return address to reply. > > > >Thanks for your time. > >Ron > > > |
"MilitaryTruckParts" > wrote in message ... > OOPS > left out that these are CHEVY'S > parts fit, Chevy, GMC trucks > > > >Hi > >We recently bought some nice US MILITARY SURPLUS > >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) > >These are the militarized versions of the standard civilian pickups > >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, > >24 volt, special towing and lifting equipment). > > > >We are parting some of them out in Southern Maine, and Southern NH. > > > >We have all types of parts available EXCEPT ENGINES > >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL > >THESE) > >Most of these vehicles are RUST FREE or have very little rust. > >We have been selling many parts to restore civilian trucks, or > >restore the military version. > > > >PARTS FIT: > >1981-87 PICKUPS > >1981-90 BLAZERS, SUBURBANS > >Some parts can be adapted to other vehicles like AXLES. > > > >SOME PARTS FOR SALE A > > > >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. > >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, > >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT > >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. > >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS > >might be available seperatly. > > > >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). > >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) > >3.08 gears, disk breaks in front, drum in rear. locking hubs. > >bent tie rod , only $200.00 set > >straight tie rod $250.00 set > > > >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) > >PERFECT FRONT FENDERS $75.00 > >COMPLETE DOORS WITH GLASS $150.00 > >RADIATOR SUPPORTS 25.00 > >PICKUP CABS $300.00 - $500.00 > >PICKUP TAILGATES $150.00 > >FRONT GRILL GUARDS (MILITARY) $75.00 > >FRONT BUMPERS 75.00 > >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) > >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 > >STRIPPED BLAZER TAILGATES $100-150.00 > >RUST FREE PICKUP BEDS WITH DENTS, ASK! > >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS > >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) > > " " " (WITH GLASS $100.00) > > > >Some other parts such as all the military accesories, seats, > >instruments, drive train, etc, ASK, ASK, ASK > > > >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 > > > >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, > >With assorted other parts, WITH paperwork to register. About > >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) > > > >Anyway these are a few of the parts we're selling off these vehicles. > >remember, rust free parts with dents are less. (rusted stuff going to > >scrap pile). > > > >So, just tell us what part you need. and we'll reply. > >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS > > > >Reply to > > >REMOVE,REMOVE from the return address to reply. > > > >Thanks for your time. > >Ron > > > |
"MilitaryTruckParts" > wrote in message ... > OOPS > left out that these are CHEVY'S > parts fit, Chevy, GMC trucks > > > >Hi > >We recently bought some nice US MILITARY SURPLUS > >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) > >These are the militarized versions of the standard civilian pickups > >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, > >24 volt, special towing and lifting equipment). > > > >We are parting some of them out in Southern Maine, and Southern NH. > > > >We have all types of parts available EXCEPT ENGINES > >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL > >THESE) > >Most of these vehicles are RUST FREE or have very little rust. > >We have been selling many parts to restore civilian trucks, or > >restore the military version. > > > >PARTS FIT: > >1981-87 PICKUPS > >1981-90 BLAZERS, SUBURBANS > >Some parts can be adapted to other vehicles like AXLES. > > > >SOME PARTS FOR SALE A > > > >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. > >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, > >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT > >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. > >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS > >might be available seperatly. > > > >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). > >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) > >3.08 gears, disk breaks in front, drum in rear. locking hubs. > >bent tie rod , only $200.00 set > >straight tie rod $250.00 set > > > >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) > >PERFECT FRONT FENDERS $75.00 > >COMPLETE DOORS WITH GLASS $150.00 > >RADIATOR SUPPORTS 25.00 > >PICKUP CABS $300.00 - $500.00 > >PICKUP TAILGATES $150.00 > >FRONT GRILL GUARDS (MILITARY) $75.00 > >FRONT BUMPERS 75.00 > >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) > >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 > >STRIPPED BLAZER TAILGATES $100-150.00 > >RUST FREE PICKUP BEDS WITH DENTS, ASK! > >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS > >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) > > " " " (WITH GLASS $100.00) > > > >Some other parts such as all the military accesories, seats, > >instruments, drive train, etc, ASK, ASK, ASK > > > >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 > > > >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, > >With assorted other parts, WITH paperwork to register. About > >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) > > > >Anyway these are a few of the parts we're selling off these vehicles. > >remember, rust free parts with dents are less. (rusted stuff going to > >scrap pile). > > > >So, just tell us what part you need. and we'll reply. > >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS > > > >Reply to > > >REMOVE,REMOVE from the return address to reply. > > > >Thanks for your time. > >Ron > > > |
>Are the 1 ton frames full sized 8 foot box frames? All military chevys use the FULL 8 foot frame. (extra reenforced) their is NO short military chevy M series pickups (airforce or navy might have just regular short pickups) > >Or, are they the shortened military frames, that used the cut off box? > > >Are the front Dana 60's set up for Budd wheels with Dual Rear Wheels, or >single rear wheels? all single rear wheels single hub front. (military did have some duellys though) > >The price sounds kind of high, but maybe if they're not full of Arabic sand >and no bomb parts. I might be interested. actually pricecheap 4x4 dealers want 2000 for just front. like boyce equip > > >"MilitaryTruckParts" > wrote in message .. . >> OOPS >> left out that these are CHEVY'S >> parts fit, Chevy, GMC trucks >> >> >> >Hi >> >We recently bought some nice US MILITARY SURPLUS >> >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) >> >These are the militarized versions of the standard civilian pickups >> >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, >> >24 volt, special towing and lifting equipment). >> > >> >We are parting some of them out in Southern Maine, and Southern NH. >> > >> >We have all types of parts available EXCEPT ENGINES >> >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL >> >THESE) >> >Most of these vehicles are RUST FREE or have very little rust. >> >We have been selling many parts to restore civilian trucks, or >> >restore the military version. >> > >> >PARTS FIT: >> >1981-87 PICKUPS >> >1981-90 BLAZERS, SUBURBANS >> >Some parts can be adapted to other vehicles like AXLES. >> > >> >SOME PARTS FOR SALE A >> > >> >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. >> >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, >> >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT >> >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. >> >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS >> >might be available seperatly. >> > >> >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). >> >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) >> >3.08 gears, disk breaks in front, drum in rear. locking hubs. >> >bent tie rod , only $200.00 set >> >straight tie rod $250.00 set >> > >> >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) >> >PERFECT FRONT FENDERS $75.00 >> >COMPLETE DOORS WITH GLASS $150.00 >> >RADIATOR SUPPORTS 25.00 >> >PICKUP CABS $300.00 - $500.00 >> >PICKUP TAILGATES $150.00 >> >FRONT GRILL GUARDS (MILITARY) $75.00 >> >FRONT BUMPERS 75.00 >> >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) >> >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 >> >STRIPPED BLAZER TAILGATES $100-150.00 >> >RUST FREE PICKUP BEDS WITH DENTS, ASK! >> >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS >> >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) >> > " " " (WITH GLASS $100.00) >> > >> >Some other parts such as all the military accesories, seats, >> >instruments, drive train, etc, ASK, ASK, ASK >> > >> >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 >> > >> >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, >> >With assorted other parts, WITH paperwork to register. About >> >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) >> > >> >Anyway these are a few of the parts we're selling off these vehicles. >> >remember, rust free parts with dents are less. (rusted stuff going to >> >scrap pile). >> > >> >So, just tell us what part you need. and we'll reply. >> >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS >> > >> >Reply to >> >> >REMOVE,REMOVE from the return address to reply. >> > >> >Thanks for your time. >> >Ron >> > >> > > |
>Are the 1 ton frames full sized 8 foot box frames? All military chevys use the FULL 8 foot frame. (extra reenforced) their is NO short military chevy M series pickups (airforce or navy might have just regular short pickups) > >Or, are they the shortened military frames, that used the cut off box? > > >Are the front Dana 60's set up for Budd wheels with Dual Rear Wheels, or >single rear wheels? all single rear wheels single hub front. (military did have some duellys though) > >The price sounds kind of high, but maybe if they're not full of Arabic sand >and no bomb parts. I might be interested. actually pricecheap 4x4 dealers want 2000 for just front. like boyce equip > > >"MilitaryTruckParts" > wrote in message .. . >> OOPS >> left out that these are CHEVY'S >> parts fit, Chevy, GMC trucks >> >> >> >Hi >> >We recently bought some nice US MILITARY SURPLUS >> >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV) >> >These are the militarized versions of the standard civilian pickups >> >and blazers (camo paint, reenforced frames, gun mounts, radio mounts, >> >24 volt, special towing and lifting equipment). >> > >> >We are parting some of them out in Southern Maine, and Southern NH. >> > >> >We have all types of parts available EXCEPT ENGINES >> >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL >> >THESE) >> >Most of these vehicles are RUST FREE or have very little rust. >> >We have been selling many parts to restore civilian trucks, or >> >restore the military version. >> > >> >PARTS FIT: >> >1981-87 PICKUPS >> >1981-90 BLAZERS, SUBURBANS >> >Some parts can be adapted to other vehicles like AXLES. >> > >> >SOME PARTS FOR SALE A >> > >> >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups. >> >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod, >> >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT >> >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles. >> >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS >> >might be available seperatly. >> > >> >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup). >> >GM 10 bolt (is the front DANA 44?, somwe people have said yes??) >> >3.08 gears, disk breaks in front, drum in rear. locking hubs. >> >bent tie rod , only $200.00 set >> >straight tie rod $250.00 set >> > >> >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less) >> >PERFECT FRONT FENDERS $75.00 >> >COMPLETE DOORS WITH GLASS $150.00 >> >RADIATOR SUPPORTS 25.00 >> >PICKUP CABS $300.00 - $500.00 >> >PICKUP TAILGATES $150.00 >> >FRONT GRILL GUARDS (MILITARY) $75.00 >> >FRONT BUMPERS 75.00 >> >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK) >> >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00 >> >STRIPPED BLAZER TAILGATES $100-150.00 >> >RUST FREE PICKUP BEDS WITH DENTS, ASK! >> >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS >> >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF) >> > " " " (WITH GLASS $100.00) >> > >> >Some other parts such as all the military accesories, seats, >> >instruments, drive train, etc, ASK, ASK, ASK >> > >> >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00 >> > >> >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES, >> >With assorted other parts, WITH paperwork to register. About >> >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS) >> > >> >Anyway these are a few of the parts we're selling off these vehicles. >> >remember, rust free parts with dents are less. (rusted stuff going to >> >scrap pile). >> > >> >So, just tell us what part you need. and we'll reply. >> >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS >> > >> >Reply to >> >> >REMOVE,REMOVE from the return address to reply. >> > >> >Thanks for your time. >> >Ron >> > >> > > |
| All times are GMT +1. The time now is 06:04 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com