If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
timing mystery continued
I thought that I had my timing straightened out on my 82 1.7 CIS rabbit
pickup with AC. It idles pretty good now. The timing light had confirmed that the ignition timing is on the mark. I have the cam mark set to the top edge of the head. Everything looks good. The problem is the lack of power. There is a significant loss in power since I had changed the timing belt. I just dont see what is causing this. Can anyone help me? Thanks. And what could I expect from advancing the cam by one notch? |
Ads |
#2
|
|||
|
|||
You will see an increase in power if the cam is one tooth retarded.
Reset the ignition timing after reseting the cam timing. wrote: >I thought that I had my timing straightened out on my 82 1.7 CIS rabbit >pickup with AC. It idles pretty good now. The timing light had >confirmed that the ignition timing is on the mark. I have the cam mark >set to the top edge of the head. Everything looks good. The problem >is the lack of power. There is a significant loss in power since I had >changed the timing belt. I just dont see what is causing this. Can >anyone help me? Thanks. And what could I expect from advancing the >cam by one notch? Jim B. |
#3
|
|||
|
|||
You will see an increase in power if the cam is one tooth retarded.
Reset the ignition timing after reseting the cam timing. wrote: >I thought that I had my timing straightened out on my 82 1.7 CIS rabbit >pickup with AC. It idles pretty good now. The timing light had >confirmed that the ignition timing is on the mark. I have the cam mark >set to the top edge of the head. Everything looks good. The problem >is the lack of power. There is a significant loss in power since I had >changed the timing belt. I just dont see what is causing this. Can >anyone help me? Thanks. And what could I expect from advancing the >cam by one notch? Jim B. |
#4
|
|||
|
|||
What can go wrong when changing a timing belt that would result in a
big loss of acceleration while still holding the same idle. It also seems to miss just a little when cruising down the street. Please help. Also, do ignition computer systems help older vws? wrote: > You will see an increase in power if the cam is one tooth retarded. > Reset the ignition timing after reseting the cam timing. > > wrote: > > >I thought that I had my timing straightened out on my 82 1.7 CIS rabbit > >pickup with AC. It idles pretty good now. The timing light had > >confirmed that the ignition timing is on the mark. I have the cam mark > >set to the top edge of the head. Everything looks good. The problem > >is the lack of power. There is a significant loss in power since I had > >changed the timing belt. I just dont see what is causing this. Can > >anyone help me? Thanks. And what could I expect from advancing the > >cam by one notch? > > > Jim B. |
#5
|
|||
|
|||
What can go wrong when changing a timing belt that would result in a
big loss of acceleration while still holding the same idle. It also seems to miss just a little when cruising down the street. Please help. Also, do ignition computer systems help older vws? wrote: > You will see an increase in power if the cam is one tooth retarded. > Reset the ignition timing after reseting the cam timing. > > wrote: > > >I thought that I had my timing straightened out on my 82 1.7 CIS rabbit > >pickup with AC. It idles pretty good now. The timing light had > >confirmed that the ignition timing is on the mark. I have the cam mark > >set to the top edge of the head. Everything looks good. The problem > >is the lack of power. There is a significant loss in power since I had > >changed the timing belt. I just dont see what is causing this. Can > >anyone help me? Thanks. And what could I expect from advancing the > >cam by one notch? > > > Jim B. |
#7
|
|||
|
|||
Incorrect camshaft timing will cause a big loss of power while
presenting a deceptively smooth idle. The 82 should already have all the electronic ignition you need. wrote: >What can go wrong when changing a timing belt that would result in a >big loss of acceleration while still holding the same idle. It also >seems to miss just a little when cruising down the street. Please >help. Also, do ignition computer systems help older vws? > wrote: >> You will see an increase in power if the cam is one tooth retarded. >> Reset the ignition timing after reseting the cam timing. >> >> wrote: >> >> >I thought that I had my timing straightened out on my 82 1.7 CIS >rabbit >> >pickup with AC. It idles pretty good now. The timing light had >> >confirmed that the ignition timing is on the mark. I have the cam >mark >> >set to the top edge of the head. Everything looks good. The >problem >> >is the lack of power. There is a significant loss in power since I >had >> >changed the timing belt. I just dont see what is causing this. Can >> >anyone help me? Thanks. And what could I expect from advancing the >> >cam by one notch? >> >> >> Jim B. Jim B. |
#8
|
|||
|
|||
Check. I just the cam mark (on driver's side) to the top edge of the
head while #1 at TDC. I had messed with that a bit in experimentation. The result seems fairly insignificant. I am now questioning my own senses. That is, maybe I have gotten accustomed to a mazda pickup that I had been driving while my truck was dead. I will take my pickup on the freeway tomarrow to observe its behavior. That is the place that I know my vw performance. It would usually be ~struggling when on cruise at 75 MPH in .71 5th gear. I shall see if it will even pick up and hold 75 MPH now. The idle point seems to change now as well. If I let it sit and idle, it seems to start to miss a bit and the idle drops. How do I read this? Oh, and i responce to the ignition quality.. I have recently read that in opinion of some experts, Bosch ignition systems are relatively of lower quality than the American counterparts. The source of this is "The Doctor's step by step guide to optimizing your ignition" by Christopher Jacobs of the Jacobs company that makes ignition components. What it all seemed to come down to is the ignition system's ability to allow greater spark plug gap. Which would allow a larger ball of flame initially, so the propogation of combustion would be advanced and more complete. What do you think? wrote: > Incorrect camshaft timing will cause a big loss of power while > presenting a deceptively smooth idle. The 82 should already have all > the electronic ignition you need. > > wrote: > > >What can go wrong when changing a timing belt that would result in a > >big loss of acceleration while still holding the same idle. It also > >seems to miss just a little when cruising down the street. Please > >help. Also, do ignition computer systems help older vws? > > > wrote: > >> You will see an increase in power if the cam is one tooth retarded. > >> Reset the ignition timing after reseting the cam timing. > >> > >> wrote: > >> > >> >I thought that I had my timing straightened out on my 82 1.7 CIS > >rabbit > >> >pickup with AC. It idles pretty good now. The timing light had > >> >confirmed that the ignition timing is on the mark. I have the cam > >mark > >> >set to the top edge of the head. Everything looks good. The > >problem > >> >is the lack of power. There is a significant loss in power since I > >had > >> >changed the timing belt. I just dont see what is causing this. Can > >> >anyone help me? Thanks. And what could I expect from advancing the > >> >cam by one notch? > >> > >> > >> Jim B. > > > Jim B. |
#9
|
|||
|
|||
Check. I just the cam mark (on driver's side) to the top edge of the
head while #1 at TDC. I had messed with that a bit in experimentation. The result seems fairly insignificant. I am now questioning my own senses. That is, maybe I have gotten accustomed to a mazda pickup that I had been driving while my truck was dead. I will take my pickup on the freeway tomarrow to observe its behavior. That is the place that I know my vw performance. It would usually be ~struggling when on cruise at 75 MPH in .71 5th gear. I shall see if it will even pick up and hold 75 MPH now. The idle point seems to change now as well. If I let it sit and idle, it seems to start to miss a bit and the idle drops. How do I read this? Oh, and i responce to the ignition quality.. I have recently read that in opinion of some experts, Bosch ignition systems are relatively of lower quality than the American counterparts. The source of this is "The Doctor's step by step guide to optimizing your ignition" by Christopher Jacobs of the Jacobs company that makes ignition components. What it all seemed to come down to is the ignition system's ability to allow greater spark plug gap. Which would allow a larger ball of flame initially, so the propogation of combustion would be advanced and more complete. What do you think? wrote: > Incorrect camshaft timing will cause a big loss of power while > presenting a deceptively smooth idle. The 82 should already have all > the electronic ignition you need. > > wrote: > > >What can go wrong when changing a timing belt that would result in a > >big loss of acceleration while still holding the same idle. It also > >seems to miss just a little when cruising down the street. Please > >help. Also, do ignition computer systems help older vws? > > > wrote: > >> You will see an increase in power if the cam is one tooth retarded. > >> Reset the ignition timing after reseting the cam timing. > >> > >> wrote: > >> > >> >I thought that I had my timing straightened out on my 82 1.7 CIS > >rabbit > >> >pickup with AC. It idles pretty good now. The timing light had > >> >confirmed that the ignition timing is on the mark. I have the cam > >mark > >> >set to the top edge of the head. Everything looks good. The > >problem > >> >is the lack of power. There is a significant loss in power since I > >had > >> >changed the timing belt. I just dont see what is causing this. Can > >> >anyone help me? Thanks. And what could I expect from advancing the > >> >cam by one notch? > >> > >> > >> Jim B. > > > Jim B. |
#10
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Honda Passport - Timing Belt | ajpdla | Honda | 3 | December 12th 04 03:12 AM |
Changing Timing Belt on Honda Civic !!! | Jason | Honda | 10 | December 11th 04 03:24 AM |
Civic Timing Belt Saga - Continued | disallow | Honda | 5 | November 17th 04 07:44 PM |
coolant leak, waterpump and timing chain | Anwar | VW water cooled | 1 | November 1st 04 11:08 PM |