Cherokee Valve cover grommets?

I have an 89 Chero, 4.0 with metal valve cover. The dealer wants $50 for the
crankcase vent tube assembly.
Does anyone have a source for the 90 degree grommet?
I may just TIG weld an elbow opn and use straight oil hose.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

In article >,
"Stupendous Man" > wrote:

> I have an 89 Chero, 4.0 with metal valve cover. The dealer wants $50 for the
> crankcase vent tube assembly.
> Does anyone have a source for the 90 degree grommet?
> I may just TIG weld an elbow opn and use straight oil hose.

I think www.4wd.com has it in their catalog; I didn't see it online (but
didn't look for long). $50, though, might not be that bad a price.

Look down the isles of the Kragen, Pep Boys, Auto Zone. will
probably save you the time of making one.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Stupendous Man wrote:
>
> I have an 89 Chero, 4.0 with metal valve cover. The dealer wants $50 for the
> crankcase vent tube assembly.
> Does anyone have a source for the 90 degree grommet?
> I may just TIG weld an elbow opn and use straight oil hose.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty

"L.W.(Bill) Hughes III" > wrote in message
...
> Look down the isles of the Kragen, Pep Boys, Auto Zone. will
> probably save you the time of making one.

We do have one kragen in the county, no luck there or at the Napa stores.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

OK, it looks like a case of "parts guy failure". I found it on the NApa
website as "air intake ventilation" hose. $20. Cool.Cheaper than my time
making one.

http://www.napaautoparts.com/masterp...ke+Ventilation




--
Stupendous Man,
Defender of Freedom, Advocate of Liberty