If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need input on oil filter on '85 535
I have a 1985 535 BMW and I'd appreciate some insight on installing the
new cartridge oil filter. I'm fairly adept in this sort of thing but my mechanics instructions for all the parts that came with the filter don't seem to match what the previous filter had. The new German paper filter came with: - 3 aluminum washers 2 small, and one large, approx 1" diameter - 1 large O-ring ~4" in diameter and one very small O-ring ~1/4" in diameter. My mechanic told me to use both small washers and both O-rings and ignore the large washer. I understand to use the large O-ring for the housing, 1 small washer for the bolt as it enters the cartridge casing but what is the 2nd washer for and the tiny O-ring? Bentley or Chilton manuals don't seem to have this level of detail. Any help is appreciated. Dan |
Ads |
#2
|
|||
|
|||
The small o-ring goes on the tip of the long bolt.The large washer is for
the drain plug.You know where the large o-ring goes. One of the small aluminiun washers is for the top of the bolt. The second is just for a spare. "Dan" > wrote in message 9... > I have a 1985 535 BMW and I'd appreciate some insight on installing the > new cartridge oil filter. I'm fairly adept in this sort of thing but my > mechanics instructions for all the parts that came with the filter don't > seem to match what the previous filter had. The new German paper filter > came with: > > - 3 aluminum washers 2 small, and one large, approx 1" diameter > - 1 large O-ring ~4" in diameter and one very small O-ring ~1/4" in > diameter. > > My mechanic told me to use both small washers and both O-rings and ignore > the large washer. I understand to use the large O-ring for the housing, 1 > small washer for the bolt as it enters the cartridge casing but what is > the 2nd washer for and the tiny O-ring? > > Bentley or Chilton manuals don't seem to have this level of detail. > > Any help is appreciated. > Dan > |
#3
|
|||
|
|||
"Dan" > wrote in message 9... >I have a 1985 535 BMW and I'd appreciate some insight on installing the > new cartridge oil filter. I'm fairly adept in this sort of thing but my > mechanics instructions for all the parts that came with the filter don't > seem to match what the previous filter had. The new German paper filter > came with: > > - 3 aluminum washers 2 small, and one large, approx 1" diameter > - 1 large O-ring ~4" in diameter and one very small O-ring ~1/4" in > diameter. > > My mechanic told me to use both small washers and both O-rings and ignore > the large washer. I understand to use the large O-ring for the housing, 1 > small washer for the bolt as it enters the cartridge casing but what is > the 2nd washer for and the tiny O-ring? > > Bentley or Chilton manuals don't seem to have this level of detail. > > Any help is appreciated. > Dan > The second washer is for the drain plug. The small o-ring is at the bottom of the bolt that extends down through the filter. Kyle. |
#4
|
|||
|
|||
Thank you both for the input it was a big help... and damn that small
O-ring. Dan > > "Dan" > wrote in message > 9... >>I have a 1985 535 BMW and I'd appreciate some insight on installing >>the >> new cartridge oil filter. I'm fairly adept in this sort of thing but >> my mechanics instructions for all the parts that came with the filter >> don't seem to match what the previous filter had. The new German >> paper filter came with: >> >> - 3 aluminum washers 2 small, and one large, approx 1" diameter >> - 1 large O-ring ~4" in diameter and one very small O-ring ~1/4" in >> diameter. >> >> My mechanic told me to use both small washers and both O-rings and >> ignore the large washer. I understand to use the large O-ring for the >> housing, 1 small washer for the bolt as it enters the cartridge >> casing but what is the 2nd washer for and the tiny O-ring? >> >> Bentley or Chilton manuals don't seem to have this level of detail. >> >> Any help is appreciated. >> Dan >> > The second washer is for the drain plug. The small o-ring is at the > bottom of the bolt that extends down through the filter. > > Kyle. > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Maxxair Open Air Filter 147 | VMax | Alfa Romeo | 0 | November 27th 04 07:27 PM |
Where to get an open air filter for a 147 JTD? | VMax | Alfa Romeo | 0 | September 8th 04 06:54 PM |
Alfa 166 Air Filter - same as GTV 3,0 or 156 2.5 ??? | jenks80085 | Alfa Romeo | 0 | June 11th 04 12:25 PM |
AR 156 2.0TS Air Filter question | Mika Sutinen | Alfa Romeo | 2 | May 21st 04 03:00 PM |
alternative fuels - can you help with some input? | SS | Alfa Romeo | 5 | May 4th 04 09:57 PM |