A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Chrysler
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Electric in line fuel pump instalation



 
 
Thread Tools Display Modes
  #1  
Old October 10th 08, 04:47 PM posted to rec.autos.makers.chrysler
pj
external usenet poster
 
Posts: 10
Default Electric in line fuel pump instalation

Hi
It is 1 Ton RAM 92 Turbo Diesel. What is the best place to connect electric
fuel pump - I mean electricity - need power only with ignition ON. I don't
like to take cables to fuse box. I any place close to Air Heating relays?


Ads
  #2  
Old October 10th 08, 07:32 PM posted to rec.autos.makers.chrysler
John Kunkel
external usenet poster
 
Posts: 81
Default Electric in line fuel pump instalation


"pj" > wrote in message
...
> Hi
> It is 1 Ton RAM 92 Turbo Diesel. What is the best place to connect
> electric fuel pump - I mean electricity - need power only with ignition
> ON. I don't like to take cables to fuse box. I any place close to Air
> Heating relays?
>


Each of the manifold heater relays on the drivers side fender panel have a
14 gauge dark blue wire that is hot with IGN only.
Each connector pushes onto a threaded stud (10-32) that easily accepts a
ring terminal and nut.


  #3  
Old October 10th 08, 08:22 PM posted to rec.autos.makers.chrysler
pj
external usenet poster
 
Posts: 10
Default Electric in line fuel pump instalation


"John Kunkel" > wrote in message
. ..
>
> "pj" > wrote in message
> ...
>> Hi
>> It is 1 Ton RAM 92 Turbo Diesel. What is the best place to connect
>> electric fuel pump - I mean electricity - need power only with ignition
>> ON. I don't like to take cables to fuse box. I any place close to Air
>> Heating relays?
>>

>
> Each of the manifold heater relays on the drivers side fender panel have a
> 14 gauge dark blue wire that is hot with IGN only.
> Each connector pushes onto a threaded stud (10-32) that easily accepts a
> ring terminal and nut.
>Thanks for info.

I will do it.
Best regards jp


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
No electric to new fuel pump [email protected] Technology 2 March 6th 07 02:02 PM
Replacing main fuel pump. Question pinching fuel line from transfer pump. tonyw VW water cooled 2 August 14th 06 06:09 AM
1974 SB - Replacing manual fuel pump with an electric (fuel delivery problem) Steve VW air cooled 10 June 20th 06 08:05 PM
Electric fuel pump bbs Technology 5 March 26th 06 05:10 PM
Electric Fuel pump question Mike West VW air cooled 9 February 2nd 06 10:45 PM


All times are GMT +1. The time now is 01:02 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.