If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to change lug studs on 93 prelude
I am in the drive to change some lug stud on a 93 prelude over the
weekend and need some insights..... The prelude is a 4 disc setup. Tips from anyone who has done this or have seen some do it before are welcome |
Ads |
#2
|
|||
|
|||
How to change lug studs on 93 prelude
knock em out with a hammer and pull the new ones up tight with an impact.
you might need to space out the lug nut from the hub with some washers. on my 92 civic i had hell squeezing the stud in. i ground one side of the head of the stud and it slipped right in. some say it might weaken the stud but i got the idea from stock hub bolts on a jeep dana 30. if studs can hold up to the torture of offroading they can handle it on a honda! "Brain Damidge" > wrote in message oups.com... I am in the drive to change some lug stud on a 93 prelude over the weekend and need some insights..... The prelude is a 4 disc setup. Tips from anyone who has done this or have seen some do it before are welcome |
#3
|
|||
|
|||
How to change lug studs on 93 prelude
Jeff wrote:
> > knock em out with a hammer and pull the new ones up tight with an impact. > you might need to space out the lug nut from the hub with some washers. on > my 92 civic i had hell squeezing the stud in. i ground one side of the head > of the stud and it slipped right in. some say it might weaken the stud but i > got the idea from stock hub bolts on a jeep dana 30. if studs can hold up to > the torture of offroading they can handle it on a honda! > > "Brain Damidge" > wrote in message > oups.com... > I am in the drive to change some lug stud on a 93 prelude over the > weekend and need some insights..... > > The prelude is a 4 disc setup. > > Tips from anyone who has done this or have seen some do it before are > welcome -------------------------------------- I thought hammers were a no-no because the impact goes through the bearing ? ? www.slhondaparts.com has your exploded views and part numbers. 'Curly' |
#4
|
|||
|
|||
How to change lug studs on 93 prelude
'Curly Q. Links' wrote:
> Jeff wrote: >> knock em out with a hammer and pull the new ones up tight with an impact. >> you might need to space out the lug nut from the hub with some washers. on >> my 92 civic i had hell squeezing the stud in. i ground one side of the head >> of the stud and it slipped right in. some say it might weaken the stud but i >> got the idea from stock hub bolts on a jeep dana 30. if studs can hold up to >> the torture of offroading they can handle it on a honda! >> >> "Brain Damidge" > wrote in message >> oups.com... >> I am in the drive to change some lug stud on a 93 prelude over the >> weekend and need some insights..... >> >> The prelude is a 4 disc setup. >> >> Tips from anyone who has done this or have seen some do it before are >> welcome > > -------------------------------------- > > I thought hammers were a no-no because the impact goes through the > bearing ? ? absolutely. should remove the hub, or drive the stud out with a press - hammers are verboten. > www.slhondaparts.com has your exploded views and part > numbers. > > 'Curly' |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unusual ATF Change on 1999 528i (re post) | [email protected] | BMW | 0 | August 4th 06 07:44 PM |
Recommendations for Jeep Mechanic near Edison, NJ | [email protected] | Jeep | 1 | July 30th 06 07:10 PM |
Oil change on 1996 Audi A6 - V6 2.6 litre engine (UK) | Mark | Audi | 20 | December 18th 05 02:28 PM |
1st Oil Change | Dave L | Honda | 4 | November 5th 05 10:29 PM |
THIS ADD CAN CHANGE YOUR LIFE | jaman | General | 0 | May 30th 04 07:05 PM |