If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Great Experience - Sheet Metal Guy
I hope this doesn't tick anyone here off but in the greater scheme of
things it's recommendations like these that makes a board like this beneficial to all. I needed a panel for the shifter opening in the floor, and found Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ tub on a '85 CJ frame and the first floor plate I bought used on Ebay didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he set me up with a smooth aluminum (vs. diamond plate) panel that fit right straight out of the box, curved to fit the hump. The ****er openings lined up perfectly and the mounting holes around the perimiter as well as the boot mount holes were dead-nuts on, too. The price was very very reasonable and I got the piece here in New England in about 4 days. I don't want to go putting his phone number here unsolicited, but the email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a pleasure to do business with. And no, I have nothing to gain from this recommendation. - Mike |
Ads |
#2
|
|||
|
|||
Great Experience - Sheet Metal Guy
"The ****er openings lined up perfectly..."
Sounds like a plumbing job I did recently. Earle > wrote in message oups.com... > I hope this doesn't tick anyone here off but in the greater scheme of > things it's recommendations like these that makes a board like this > beneficial to all. > > I needed a panel for the shifter opening in the floor, and found > Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ > tub on a '85 CJ frame and the first floor plate I bought used on Ebay > didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he > set me up with a smooth aluminum (vs. diamond plate) panel that fit > right straight out of the box, curved to fit the hump. The ****er > openings lined up perfectly and the mounting holes around the perimiter > as well as the boot mount holes were dead-nuts on, too. The price was > very very reasonable and I got the piece here in New England in about 4 > days. > > I don't want to go putting his phone number here unsolicited, but the > email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a > pleasure to do business with. And no, I have nothing to gain from this > recommendation. > > - Mike > |
#3
|
|||
|
|||
Great Experience - Sheet Metal Guy
LAMO !
Dave Milne, Scotland "Earle Horton" > wrote in message om... > "The ****er openings lined up perfectly..." > > Sounds like a plumbing job I did recently. > > Earle > > > wrote in message > oups.com... > > I hope this doesn't tick anyone here off but in the greater scheme of > > things it's recommendations like these that makes a board like this > > beneficial to all. > > > > I needed a panel for the shifter opening in the floor, and found > > Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ > > tub on a '85 CJ frame and the first floor plate I bought used on Ebay > > didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he > > set me up with a smooth aluminum (vs. diamond plate) panel that fit > > right straight out of the box, curved to fit the hump. The ****er > > openings lined up perfectly and the mounting holes around the perimiter > > as well as the boot mount holes were dead-nuts on, too. The price was > > very very reasonable and I got the piece here in New England in about 4 > > days. > > > > I don't want to go putting his phone number here unsolicited, but the > > email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a > > pleasure to do business with. And no, I have nothing to gain from this > > recommendation. > > > > - Mike > > > > |
#4
|
|||
|
|||
Great Experience - Sheet Metal Guy
Does he have a website ?
Dave Milne, Scotland > wrote in message oups.com... > I hope this doesn't tick anyone here off but in the greater scheme of > things it's recommendations like these that makes a board like this > beneficial to all. > > I needed a panel for the shifter opening in the floor, and found > Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ > tub on a '85 CJ frame and the first floor plate I bought used on Ebay > didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he > set me up with a smooth aluminum (vs. diamond plate) panel that fit > right straight out of the box, curved to fit the hump. The ****er > openings lined up perfectly and the mounting holes around the perimiter > as well as the boot mount holes were dead-nuts on, too. The price was > very very reasonable and I got the piece here in New England in about 4 > days. > > I don't want to go putting his phone number here unsolicited, but the > email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a > pleasure to do business with. And no, I have nothing to gain from this > recommendation. > > - Mike > |
#5
|
|||
|
|||
Great Experience - Sheet Metal Guy
Lol, Shifter. Shift - Er. My 'F' key must be sticky
Mike's ebay store is at http://stores.ebay.com/Custom-Jeep-Diamond-Plating |
#6
|
|||
|
|||
Great Experience - Sheet Metal Guy
those F'ing keys will get you every time!
On Tue, 3 Jan 2006 19:07:40 UTC " > wrote: > Lol, Shifter. Shift - Er. My 'F' key must be sticky > > Mike's ebay store is at > http://stores.ebay.com/Custom-Jeep-Diamond-Plating > -- Will Honea |
#7
|
|||
|
|||
Great Experience - Sheet Metal Guy
I was gonna let it go, but I really needed the laugh!
Seahag "Dave Milne" > wrote: > LAMO ! > > > "Earle Horton" > wrote: >> "The ****er openings lined up perfectly..." >> >> Sounds like a plumbing job I did recently. >> >> Earle >> >> > wrote in message >> oups.com... >> > I hope this doesn't tick anyone here off but in the >> > greater scheme of >> > things it's recommendations like these that makes a >> > board like this >> > beneficial to all. >> > >> > I needed a panel for the shifter opening in the floor, >> > and found >> > Grimjeeper Diamond Plating on the 'net. My project >> > jeep is a '91 YJ >> > tub on a '85 CJ frame and the first floor plate I >> > bought used on Ebay >> > didn't fit right. I emailed a picture to Mike at >> > Grimmjeeper, and he >> > set me up with a smooth aluminum (vs. diamond plate) >> > panel that fit >> > right straight out of the box, curved to fit the hump. >> > The ****er >> > openings lined up perfectly and the mounting holes >> > around the perimiter >> > as well as the boot mount holes were dead-nuts on, too. >> > The price was >> > very very reasonable and I got the piece here in New >> > England in about 4 >> > days. >> > >> > I don't want to go putting his phone number here >> > unsolicited, but the >> > email is grimjeeper1 at hotmail dot com. Very >> > Jeep-friendly and a >> > pleasure to do business with. And no, I have nothing >> > to gain from this >> > recommendation. >> > >> > - Mike >> > >> >> > > |
#8
|
|||
|
|||
Wow!! I just found this by doing a search .
Talk about Word of Mouth, and the compliments. I Started making jeep products about 5-6 yrs ago , as I was looking for parts for mine. Everybody wantd way too much for their goods. So I made my own. Someone asked where I got my parts from..... and then the rest is history. I try to keep the costs down but the price of aluminum has shot way up since I started. All I can say is ... Thank you! Yeah you better take care of that "F" key too! Any way here is link to some photos that he may not have known about Jeep Diamond Plate Thank you again... Mike Quote:
|
#9
|
|||
|
|||
Great Experience - Sheet Metal Guy
Unfortunately you have just undone the good word by SPAMMING a newsgroup
with a formal Charter that forbids commercial posts. I have found from experience Spammers only sell crap. Legit companies don't need to SPAM for suckers. The Charter for this group can be found he ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys You only rate a Boycott in my opinion. Mike GrimJeeper wrote: > > Wow!! I just found this by doing a search . <spam snipped> |
#10
|
|||
|
|||
My appologies. You will not see me here again! Spamming was not my intention.
TYVM Mike Quote:
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Subject: Traffic School - online traffic school experience response | [email protected] | Corvette | 0 | October 9th 04 05:56 PM |
ASE Work experience question | thongsai | General | 0 | July 9th 04 11:16 PM |
FS: 1992 All-World "1992 Indy-Car World Series" PROMO Sheet | J.R. Sinclair | General | 0 | March 21st 04 06:23 AM |
FS: 1990 "DYNOMAX HOT" Turbo System 'Funnycar' Promo Sheet | J.R. Sinclair | General | 0 | March 4th 04 05:34 AM |