If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
UK 147 Fuse placement
Hi,
I've just looked at the fuses under the dash and they according to the handbook, they all seem out of place....(wrong fuse ratings in each socket). Is this anything to do with a UK car and a non-UK handbook ? I also found that the two fastening screws are to small....they go straight threw the holes their supposed to screw into. The screws look fine, not worn at all. Any ideas ? TIA Ash |
Ads |
#2
|
|||
|
|||
On Mon, 21 Jun 2004 07:59:26 +0100, "Ash" > wrote:
>I also found that the two fastening screws are to small....they go straight >threw the holes their supposed to screw into. D- Must try harder. I also found that the two fastening screws are too small....they go straight through the holes they're supposed to screw into. -- ColonelTupperware spouting ******** on Usenet since 1997 Usenet FAQ at http://www.its.caltech.edu/its/servi...ws/news2.shtml UPCE FAQ at http://upce.org.uk/ UKRM FAQ at http://www.ukrm.net/faq/ |
#3
|
|||
|
|||
"Ash" > wrote in message >...
> Hi, > > I've just looked at the fuses under the dash and they according to the > handbook, they all seem out of place....(wrong fuse ratings in each socket). > Is this anything to do with a UK car and a non-UK handbook ? > > I also found that the two fastening screws are to small....they go straight > threw the holes their supposed to screw into. The screws look fine, not worn > at all. Any ideas ? > > TIA > Ash Hi Ash, I had trouble with the srews too, after the Alfa dealer had been working on it. The fixing was a two piece part [I FOUND IT UNDER THE SEAT AFTER WORK WAS DONE]and aukward to fit together, so I fitted a different clip and screw [u shape clip] and now it is fine. How have you got a non UK handbook? Mine was an import and had a UK handbook. There are one or two fuse boxes, [Not trying to be rude] are you sure you are looking at the right one. John, UK. |
Thread Tools | |
Display Modes | |
|
|