If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Impressed with Dodge Caliber
We have had a Dodge Caliber SXT for one month now, having traded in a
2005 PT Cruiser Convertible, and are very impressed with the quality and gas mileage of the vehicle. We have never gotten below 25 and so far have almost gotten 30 on a short trip to Kennedy Space Center. The car is very tightly built, we love the CVT smooth shifting and the cruise control keeps it around 1500-2000 rpms at all time, accounting for the good mileage. The last Dodge that I owned was a 70 Dart Swinger, 225 Slant six, the other cars being Chryslers. My family has owned Chrysler cars since the 1940's, and I own a 1940 restored Royal coupe. I have heard many good things about the Caliber, but I wonder why the name Dodge is nowhere to be found on the car? -- "What do you mean there's no movie?" |
Ads |
#2
|
|||
|
|||
Impressed with Dodge Caliber
|
#3
|
|||
|
|||
Impressed with Dodge Caliber
Steve wrote:
> wrote: > > > we love the CVT smooth shifting > > "CVT" and "Shifting" (no matter how smooth) don't belong in the same > sentence. Is it true that the Caliber CVT "fakes" shifts rather than > just holding the RPM constant as speed increases? And if so, have you > checked into the rumor that the controller can be re-flashed to make it > *really* be a CVT? CVT's, those things are like big snow-mobile clutches...... |
#4
|
|||
|
|||
Impressed with Dodge Caliber
Many people "expect" to fee some sort of "shifting activity" in their
transmissions, whether CVT or not. CVTs also take a little getting used to in driving them, as some of our Nissan techs had to instruct Murano customers of how to drive the vehicles to let the CVT act as it should. A steady throttle foot during acceleration keeps things going as they should, rather than into and out of the throttle as some people tend to do when "the feel" is not right to them. Even Nissan has "gear" selections in their CVTs, to mimic certain gear ratios for manual shifting capabilities. Not everybody is ready for (or used to) the ole DynaFlow feel of smoooooth acceleration with little engine rpm change. I suspect that Chrysler's foray into CVTs will work better than GM/Saturn's and Ford's did. Nissan's had full CVT coverage for a couple of model years now, but not in the more powerful Infinity line. It doesn't seem to have hurt sales or have received consumer resistance, especially as it is now billed as a fuel economy booster. Enjoy! C-BODY |
#5
|
|||
|
|||
Impressed with Dodge Caliber
"Steve" > wrote >...Is it true that the Caliber CVT "fakes" shifts rather than just holding >the RPM constant as speed increases? The couple I've tested held a constant rpm with a constant throttle setting. Some models do, however, have an "autostick" setting which allows them to be manually shifted through 6 speeds. I think they work great if properly set up. Plus they have far fewer parts than any other types of transmission, manuals included. |
#6
|
|||
|
|||
Impressed with Dodge Caliber
In article >,
Steve > wrote: > wrote: > > > we love the CVT smooth shifting > > "CVT" and "Shifting" (no matter how smooth) don't belong in the same > sentence. Is it true that the Caliber CVT "fakes" shifts rather than > just holding the RPM constant as speed increases? And if so, have you > checked into the rumor that the controller can be re-flashed to make it > *really* be a CVT? You will have to resist resisting change. CVT is the way of the future, it just makes sense. |
#7
|
|||
|
|||
Impressed with Dodge Caliber
Josh S wrote:
> In article >, > Steve > wrote: > > wrote: >> >> > we love the CVT smooth shifting >> >>"CVT" and "Shifting" (no matter how smooth) don't belong in the same >>sentence. Is it true that the Caliber CVT "fakes" shifts rather than >>just holding the RPM constant as speed increases? And if so, have you >>checked into the rumor that the controller can be re-flashed to make it >>*really* be a CVT? > > > You will have to resist resisting change. > CVT is the way of the future, it just makes sense. You COMPLETELY boofed your understanding of what I was saying. Read it again, with feeling. My whole point was that its looney to take a perfectly good CVT (which I agree is the way of the future apart from hybrids) and then program it to "shift" like a regular automatic just so customers won't think it "feels odd." |
#8
|
|||
|
|||
Impressed with Dodge Caliber
On Sep 25, 12:44 pm, Josh S > wrote:
> In article >, > > CVT is the way of the future, it just makes sense. Ha. Not if Chrysler has their way. Dual clutch, here it comes: http://www.allpar.com/corporate/auto...nsmission.html |
#9
|
|||
|
|||
Impressed with Dodge Caliber
Jalapeno wrote:
> On Sep 25, 12:44 pm, Josh S > wrote: > >>In article >, >> >>CVT is the way of the future, it just makes sense. > > > Ha. Not if Chrysler has their way. Dual clutch, here it comes: > > http://www.allpar.com/corporate/auto...nsmission.html > Current CVTs can't handle as much torque as conventional automatics or manuals, but "manumatics" may just be a stopgap for heavier duty vehicles until higher torque-capable CVTs are developed. Then again, automatically shifting manual transmissions have been used for a long, long time on 18-wheelers. I was skeptical the first time I was shown an Eaton auto-manual on an 18-wheeler. I'd heard the driver pull it in, and it sounded exactly like a conventional 18-wheeler shifting. But it was all being done by the computer, not the driver, and he proved it to me by taking me for a turn around the compound in it. Very odd sensation to feel the engine drop to idle, hear the gears change, and then the power come back on without the driver moving a muscle. This was circa 1998, and it was a Freightliner with a Cummins N-14 and Eaton transmission and axles. |
#10
|
|||
|
|||
Impressed with Dodge Caliber
Jalapeno > writes:
> On Sep 25, 12:44 pm, Josh S > wrote: > > In article >, > > > > CVT is the way of the future, it just makes sense. > > Ha. Not if Chrysler has their way. Dual clutch, here it comes: > > http://www.allpar.com/corporate/auto...nsmission.html You're confusing the future with the present. CVTs aren't there yet for serious torque output -- I don't think Chrysler is using it for anything bigger than a 2.4? While I expect them to get there, I also expect it to take long enough that a new transmission family can be developed, produced, amortized, and regarded as "old" first. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dodge Caliber SRT | junk | Dodge | 0 | May 30th 07 06:36 AM |
Dodge Caliber | Art | Chrysler | 30 | June 21st 06 01:35 AM |
Dodge Caliber | Stuuder | Dodge | 3 | April 18th 06 02:35 PM |
Dodge Caliber? | M.R.S. | Chrysler | 22 | April 12th 06 12:11 PM |