If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
(Atten: DS) Tenrai bulbs
Daniel,
Ever heard of these bulbs? http://300mclub.100megs42.com/forums...?p=82521#82521 Bill Putney (To reply by e-mail, replace the last letter of the alphabet in my adddress with the letter 'x') |
Ads |
#2
|
|||
|
|||
"Bill Putney" wrote in message: "Ever heard of these bulbs?"
I believe they are similar to the blue headlights used in Europe. |
#3
|
|||
|
|||
On Sun, 10 Jul 2005, Bill Putney wrote: > Daniel, > Ever heard of these bulbs? > > http://300mclub.100megs42.com/forums...?p=82521#82521 A very good working definition of "insanity" is doing the same thing repeatedly and expecting a different result from iteration to iteration. Say it again: IF A HALOGEN BULB IS ADVERTISED OR DESCRIBED IN ANY WAY, SHAPE OR FORM AS "CLOSE TO HID" or "EXTRA WHITE", IT IS JUNK! DO NOT USE IT! IT PUTS OUT LESS LIGHT THAN A BULB WITH CLEAR GLASS! I'm sorry, Bill, I know you're just asking a question, but after ten years you'd think the message would get through. It doesn't matter whose name is on the package. |
#4
|
|||
|
|||
On Sun, 10 Jul 2005, Sarge wrote:
> I believe they are similar to the blue headlights used in Europe. No, they aren't similar to anything used in Europe. Learn: http://www.danielsternlighting.com/t...blue/blue.html http://www.danielsternlighting.com/t...nversions.html DS |
#5
|
|||
|
|||
Just to clarify, my rant here is NOT directed at Bill Putney. It's
directed at the marketeers who keep on sticking new labels and names onto the same Chinese garbage bulbs in the same plastic clamshell packaging, and the squirrels who keep posting to internet forums "D00d! I found the KEWLEST new bulbz, they are JUST LIKE HID XENON bling bling yo!". On Mon, 11 Jul 2005, Daniel J. Stern wrote: > > > On Sun, 10 Jul 2005, Bill Putney wrote: > > > Daniel, > > Ever heard of these bulbs? > > > > http://300mclub.100megs42.com/forums...?p=82521#82521 > > A very good working definition of "insanity" is doing the same thing > repeatedly and expecting a different result from iteration to iteration. > > Say it again: IF A HALOGEN BULB IS ADVERTISED OR DESCRIBED IN ANY WAY, > SHAPE OR FORM AS "CLOSE TO HID" or "EXTRA WHITE", IT IS JUNK! DO NOT USE > IT! IT PUTS OUT LESS LIGHT THAN A BULB WITH CLEAR GLASS! > > I'm sorry, Bill, I know you're just asking a question, but after ten years > you'd think the message would get through. It doesn't matter whose name is > on the package. > |
#6
|
|||
|
|||
Oh yeah, one more thing (in case anyone's copying posts and links and stuff from Usenet posts onto internet forums or anything): Beside the color of the glass, filament placement/focus within the bulb REALLY matters. Fractions of a millimetre make enormous differences in the beam focus. See these two beam diagrams (One specific fog lamp tested with two different bulbs whose filament position differed slightly). The top beam is in focus, the bottom beam very definitely is not!: http://dastern.torque.net/Photometry/bulbsmatter.jpg |
#7
|
|||
|
|||
Daniel J. Stern wrote:
> > On Sun, 10 Jul 2005, Bill Putney wrote: > > >>Daniel, >>Ever heard of these bulbs? >> >>http://300mclub.100megs42.com/forums...?p=82521#82521 > > > A very good working definition of "insanity" is doing the same thing > repeatedly and expecting a different result from iteration to iteration. > > Say it again: IF A HALOGEN BULB IS ADVERTISED OR DESCRIBED IN ANY WAY, > SHAPE OR FORM AS "CLOSE TO HID" or "EXTRA WHITE", IT IS JUNK! DO NOT USE > IT! IT PUTS OUT LESS LIGHT THAN A BULB WITH CLEAR GLASS! > > I'm sorry, Bill, I know you're just asking a question, but after ten years > you'd think the message would get through. It doesn't matter whose name is > on the package. I started this thread just prior to someone posting a photo of the packaging and bulbs on the 300M forums - once I saw the blue tint on the bulbs in the photos, I knew I was in for an a$$ whuppin'. 8^) BTW - the packaging doesn't just say "CLOSE TO HID" - it literally says "HID", period. I recently saw a thread about a certain bulb on another forum in which the manufacturer's specs. we "Input: 65 watts/Output: 100 watts". One ah dem power generatin', perpetual motion bulbs, Bubba! Bill Putney (To reply by e-mail, replace the last letter of the alphabet in my adddress with the letter 'x') |
#8
|
|||
|
|||
On Mon, 11 Jul 2005, Bill Putney wrote:
> BTW - the packaging doesn't just say "CLOSE TO HID" - it literally says > "HID", period. I recently saw a thread about a certain bulb on another > forum in which the manufacturer's specs. we "Input: 65 watts/Output: > 100 watts". One ah dem power generatin', perpetual motion bulbs, Bubba! Sounds like a solution to the oil shortage. Everyone install blue bulbs as a matter of National Security! Meanwhile, the ideas expressed by the army research doctor in this article seem somehow, I donno, *familiar* to me: http://tinyurl.com/85kud DS |
#9
|
|||
|
|||
Daniel J. Stern wrote:
> On Mon, 11 Jul 2005, Bill Putney wrote: > > >>BTW - the packaging doesn't just say "CLOSE TO HID" - it literally says >>"HID", period. I recently saw a thread about a certain bulb on another >>forum in which the manufacturer's specs. we "Input: 65 watts/Output: >>100 watts". One ah dem power generatin', perpetual motion bulbs, Bubba! > > > Sounds like a solution to the oil shortage. Everyone install blue bulbs as > a matter of National Security! > > Meanwhile, the ideas expressed by the army research doctor in this article > seem somehow, I donno, *familiar* to me: > http://tinyurl.com/85kud > > DS The article says about blue LED's: "Buyers are taking matters into their own hands, and have devised a variety of methods to tame their LEDs, including covering them with tape or card, disconnecting them and coating them with layers of black ink." Would you recommend that for blue tinted headlights, too, Dan? 8^) Bill Putney (To reply by e-mail, replace the last letter of the alphabet in my adddress with the letter 'x') |
#10
|
|||
|
|||
On Tue, 12 Jul 2005, Bill Putney wrote:
> > Meanwhile, the ideas expressed by the army research doctor in this > > article seem somehow, I donno, *familiar* to me: > > http://tinyurl.com/85kud > The article says about blue LED's: "Buyers are taking matters into their > own hands, and have devised a variety of methods to tame their LEDs, > including covering them with tape or card, disconnecting them and > coating them with layers of black ink." Would you recommend that for > blue tinted headlights, too, Dan? 8^) At this time I assert my Fifth and Second Amendment rights. ;-) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
(Atten: DS) Tenrai bulbs | Bill Putney | Chrysler | 0 | July 10th 05 05:11 PM |
Any recommendation for aftermarket headlamp bulbs for 94-97 Accord | [email protected] | Honda | 3 | June 3rd 05 04:25 PM |
GE Nighthawk Headlight Bulbs | uniseriate | Driving | 16 | January 14th 05 01:18 AM |