If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
What Is Term For Metallic Particles In Paint?
We had some body work done on our 2003 Accord, and they did a poor job
of matching the colors between the hood and fenders. When I pointed it out to the estimator, he said they must have used (too much or too little) of the metallic particles. Causes the paint to reflect light differently, and gives the effect of two, different colors. He had a term for it. Duffing or something strange like that. Anyone know what it was? Dick |
#2
|
|||
|
|||
Dick <LeadWinger> wrote in :
> We had some body work done on our 2003 Accord, and they did a poor job > of matching the colors between the hood and fenders. When I pointed > it out to the estimator, he said they must have used (too much or too > little) of the metallic particles. Causes the paint to reflect light > differently, and gives the effect of two, different colors. He had a > term for it. Duffing or something strange like that. Anyone know > what it was? > AFAIK, they're just called "aluminum flake", or "mica". -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#3
|
|||
|
|||
On 16 Jul 2005 01:18:17 GMT, "TeGGeR®" > wrote:
>Dick <LeadWinger> wrote in : > >> We had some body work done on our 2003 Accord, and they did a poor job >> of matching the colors between the hood and fenders. When I pointed >> it out to the estimator, he said they must have used (too much or too >> little) of the metallic particles. Causes the paint to reflect light >> differently, and gives the effect of two, different colors. He had a >> term for it. Duffing or something strange like that. Anyone know >> what it was? >> > > >AFAIK, they're just called "aluminum flake", or "mica". How about "Leafing?" I found that term on the Internet. Dick |
#4
|
|||
|
|||
Dick <LeadWinger> wrote in
: > On 16 Jul 2005 01:18:17 GMT, "TeGGeR®" > wrote: > >>Dick <LeadWinger> wrote in m: >> >>> We had some body work done on our 2003 Accord, and they did a poor >>> job of matching the colors between the hood and fenders. When I >>> pointed it out to the estimator, he said they must have used (too >>> much or too little) of the metallic particles. Causes the paint to >>> reflect light differently, and gives the effect of two, different >>> colors. He had a term for it. Duffing or something strange like >>> that. Anyone know what it was? >>> >> >> >>AFAIK, they're just called "aluminum flake", or "mica". > > How about "Leafing?" I found that term on the Internet. > Um, no. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#5
|
|||
|
|||
Well, actually yes. I ran into that term when trying to come up with
a special "platinum" edition of a product my company made. This was powder not liquiid coating and if it contained "leafing" aluminum it absolutely has to be clear coated after the initial coat is on. We found that out the hard way. Normal automotive metallic coatings are not of the "leafing" type and can be enhanced by clear coat but it is not an absolute necessity. Frank On 16 Jul 2005 02:44:43 GMT, "TeGGeR®" > wrote: >Dick <LeadWinger> wrote in : > >> On 16 Jul 2005 01:18:17 GMT, "TeGGeR®" > wrote: >> >>>Dick <LeadWinger> wrote in : >>> >>>> We had some body work done on our 2003 Accord, and they did a poor >>>> job of matching the colors between the hood and fenders. When I >>>> pointed it out to the estimator, he said they must have used (too >>>> much or too little) of the metallic particles. Causes the paint to >>>> reflect light differently, and gives the effect of two, different >>>> colors. He had a term for it. Duffing or something strange like >>>> that. Anyone know what it was? >>>> >>> >>> >>>AFAIK, they're just called "aluminum flake", or "mica". >> >> How about "Leafing?" I found that term on the Internet. >> > > >Um, no. |
#6
|
|||
|
|||
Frank Boettcher > wrote in
: > On 16 Jul 2005 02:44:43 GMT, "TeGGeR®" > wrote: > >>Dick <LeadWinger> wrote in m: >> >>> On 16 Jul 2005 01:18:17 GMT, "TeGGeR®" > wrote: >>> >>>> >>>> >>>>AFAIK, they're just called "aluminum flake", or "mica". >>> >>> How about "Leafing?" I found that term on the Internet. >>> >> >> >>Um, no. >> >> > > > > Well, actually yes. <snip> > Normal automotive metallic coatings are > not of the "leafing" type You just told me "yes", but then right after that you say "no". Which is it? -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
#7
|
|||
|
|||
Dick wrote:
> We had some body work done on our 2003 Accord, and they did a poor job > of matching the colors between the hood and fenders. When I pointed > it out to the estimator, he said they must have used (too much or too > little) of the metallic particles. Causes the paint to reflect light > differently, and gives the effect of two, different colors. He had a > term for it. Duffing or something strange like that. Anyone know > what it was? > > Dick ------------------------------ On DODGE products I've driven, the metalic particles in the paint were called: :-) _R _U _S _T :-) Have a good weekend. 'Curly' |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question: Fixing paint chips; metallic | DW | General | 1 | May 23rd 05 01:09 PM |
2002 Miata SE Paint Problems | David G. Nicholls, P.Eng., P.E. | Mazda | 1 | November 8th 04 07:48 PM |
paint chips & touchup paint (brush on vs. aerosol) | Steve W. | Honda | 1 | September 22nd 04 03:40 PM |
paint chips & touchup paint (brush on vs. aerosol) | Joe Blo | General | 9 | September 22nd 04 03:40 PM |
Maaco Paint | William Rose | General | 1 | January 16th 04 11:23 PM |