what kind of tools will I need?

RB · #1 October 3rd 06, 10:09 PM posted to rec.autos.tech

I need to replace the passenger side manual mirror on my '97 S-10 pickup.
Looks like I'm going to have to take the door panel off to do that.

What kind of tools will I need for this job?

**Harry Face** · #2 October 3rd 06, 10:28 PM posted to rec.autos.tech

Before you go to the extreme of removing the door panel , is there an
access panel above that is inline with the mirror? Perhaps this is all
you need to remove?

If the door panel has to come off some common tools used are a :

Door panel remove tool.
Torx head screw driver.
small flat blade screw driver.
Phillips screwdriver.
Allen Wrench.

Good luck

harryface

**Ken[_3_]** · #3 October 5th 06, 12:58 PM posted to rec.autos.tech

Don't forget the hammer!
Just Kidding.
Should have the access panel especially if its manual.

Harry Face wrote:
> Before you go to the extreme of removing the door panel , is there an
> access panel above that is inline with the mirror? Perhaps this is all
> you need to remove?
>
> If the door panel has to come off some common tools used are a :
>
> Door panel remove tool.
> Torx head screw driver.
> small flat blade screw driver.
> Phillips screwdriver.
> Allen Wrench.
>
> Good luck
>
> harryface

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who besides myself, carries their tools in their car?	Lawrence Glickman	Technology	50	September 20th 06 10:41 AM
how to exchange Husky brand tools?	N8N	Technology	11	June 5th 06 01:15 PM
My first clunk in the night (kind of long)	KJ.Kate	Jeep	4	February 26th 06 03:22 PM
Audi Special tools	~ ElektraMan ~	Audi	4	November 3rd 04 09:33 PM
EXCESS TOOL INVENTORY- SPX/OTC-SERVICE SOLUTIONS TOOLS	Kirk Rocheford-All World, Inc.	Dodge	0	October 18th 04 05:37 PM