That square thing in bumper

"Trey" > wrote in message
...
>
> "Branden Nelsen" > wrote in message
> ...
>> You can pop that cover out and there is a "Screw" hole behind it. In the
>> lid of your truck you should have a Tow hook that looks like a "Eye-let"
>> that you can screw in there.
>>
>> or in short.... its the tow point of your car.
>
> there is a similar set up on the side of the car for the jack isnt there?

Yes, similar. Sorta.

The ones on the side of the car are where the jack goes, and there are more
under the car in essentially the same place that are used to hold the car to
the deck of the flat bed truck if you need to have the car hauled somewhere
for service.

Do not allow the tow truck operator to leave the winch cable tight on these
points while the tow truck is under way, especially if the tires are used
as the anchor points for the straps. The suspension can allow the car to
move about on the tow truck, and if the cable is tight on the eyelets, then
the bumper can be twisted and yanked downward. Ask me how I know.