If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
1996 and obd mystery
Christopher Muto wrote:
> "Frank Berger" > wrote in message > m... >> Christopher Muto wrote: >>> "Christopher Muto" > wrote in message >>> t... >>>> "Frank Berger" > wrote in message >>>> news >>>>> miker wrote: >>>>>>> Three mechanics couldn't find the OBD II connector they said was >>>>>>> supposed to be under the dash near the driver's right knee. There is >>>>>>> a connector labeled "diagnostics" under the hood on the >>>>>>> driver's side. They said that was a different connector and >>>>>>> that I had to take the car to a place with a dynamometer. I bought >>>>>>> it new and no one ever moved or removed anything as far as I >>>>>>> know. >>>>>> >>>>>> FWIW, my '96 is the same as yours... nothing under the dash, >>>>>> "diagnostics" on driver side near clutch MC. >>>>>> >>>>>> miker >>>>> >>>>> Weird. If you check the newsgroup for past discussions of this, >>>>> everyone says OBD II came in with the 96 model year. >>>> >>>> yeah, it should be there. its normal location is at the bottom >>>> edge of the dash but the drivers right knee (north american, >>>> steering wheel on left version). i have read that they break >>>> loose and so people push them up on top of the radio or into the >>>> rats nest of wires under the dash by the steering column. have >>>> you popped off the plate under the steering column and looked >>>> around for it? it should be in there. >>> >>> "but the drivers right knee" should read "by the drivers right >>> knee". >> >> I had my car inspected this afternoon at the same place I've been >> going for years. Basically, its wink, wink, nod, nod and they >> pretend that it's a 95 and put it on the dyno. They can't find an >> OBD II connecter either. They said I should get a note from a Mazda >> dealer testifying that it doesn't have OBD II in case I ever need to >> take it someplace else. Not sure I get that. I'll just tell them its >> a '95. > > i think you should call mazda usa customer service and see what they > have to say about it... > 1-800-222-5500 6am-4:45pm pt m-f. Good idea. Thanks. |
Ads |
#12
|
|||
|
|||
1996 and obd mystery
<G> "What country?" Some natives like to still think that Georgia is part
of the CSA, not the USA, but that was settled quite a few years back, well before my time. One of my great grandmothers was a young child at the time of that debacle, and lived across the street (in a northern state capitol ) from a tall skinny lawyer that was famous for a tall top hat and a beard. Somewhere in one of the family lock boxes is a ticket to the man's funeral. I have a framed key hanging on the wall that unlocked the doors to the old state capitol building that was in use back then. Since we are not in the Atlanta smog zone, there is no mandated EM testing in my locale, although there are a few approved testing facilities that survive by doing "tuneups". My 99 is A/M turbo'd. If you were to look at the Mazda 99-00 promo and auto show pictures, you might find a "look alike" Red LS Turbo in some of the pictures. Mazda had several Miata prototypes and Japan only concept Miata models that were turbo'd and never released for production. The 99 in my garage has stock internals, ~9.5-10 psi boost, 220HP at rear wheels. I'd love to put in a LS-x V8, and caddy differential. Unfortunately, the stock market is not co-operating. 300-500 HP (depending on which LS engine is used) at moderate RPM is a new ball game. "Chris D'Agnolo" > wrote in message ... > Chuck, where are you located? What country? Sorry, I should know but I > guess I don't pay that much attention. I'm confused by your sentence; > > The 99 is turbocharged, and I hesitate to think what the testing facility > might > say. > > Maybe you're just trying to say that your 99 is turbocharged, help me out > here. > > Speaking of turbo Miatas, what year / years was the turbo available in > Australia, anybody remember? It was a predecessor to the MSM in the > states. > > Thanks, > Chris > > > "Chuck" > wrote in message > news >> If the 96 is OBDII, the underhood connector can be used (with the proper >> mating connector) by OBDII testing equipment. >> The OBDII digital data lines, ground, and maybe (don't remember) +12vdc >> are present on the OBDII underhood connector. >> An early 96 might be OBD1 >> There may be a sticker on the door post showing the SN, Trim Level, and >> date of build. >> I have a 99 model actually built in Dec 98, according to the sticker. The >> 99 is turbocharged, and I hesitate to think what the testing facility >> might say. (even with a "CARB" sticker) >> Fortunately, (Knock on Wood) we don't have to do such things here. There >> has been periodic talk of extending the mandatory testing areas to our >> locale, but, so far, nothing has come of it. >> >> "Frank Berger" > wrote in message >> m... >>> Took my Miata to a gas station for Texas inspection (past due, getting >>> nervous). The car is a '96 (actually, 96 1/2 according to the radio/cd >>> player that's in it). All the orginal paperwork says its a '96. >>> >>> Three mechanics couldn't find the OBD II connector they said was >>> supposed to be under the dash near the driver's right knee. There is a >>> connector labeled "diagnostics" under the hood on the driver's side. >>> They said that was a different connector and that I had to take the car >>> to a place with a dynamometer. I bought it new and no one ever moved or >>> removed anything as far as I know. >>> >>> I will take it back to the place that's been doing my inspections for >>> years without a problem. I think I would remember them using a >>> dynamometer, but I could be wrong. >>> >>> Any ideas? >>> >>> Thanks. >>> >> >> > |
#13
|
|||
|
|||
1996 and obd mystery
<G> "What country?" Some natives like to still think that Georgia is part
of the CSA, not the USA, but that was settled quite a few years back, well before my time. One of my great grandmothers was a young child at the time of that debacle, and lived across the street (in a northern state capitol ) from a tall skinny lawyer that was famous for a tall top hat and a beard. Somewhere in one of the family lock boxes is a ticket to the man's funeral. I have a framed key hanging on the wall that unlocked the doors to the old state capitol building that was in use back then. Since we are not in the Atlanta smog zone, there is no mandated EM testing in my locale, although there are a few approved testing facilities that survive by doing "tuneups". My 99 is A/M turbo'd. If you were to look at the Mazda 99-00 promo and auto show pictures, you might find a "look alike" Red LS Turbo in some of the pictures. Mazda had several Miata prototypes and Japan only concept Miata models that were turbo'd and never released for production. The 99 in my garage has stock internals, ~9.5-10 psi boost, 220HP at rear wheels. I'd love to put in a LS-x V8, and caddy differential. Unfortunately, the stock market is not co-operating. 300-500 HP (depending on which LS engine is used) at moderate RPM is a new ball game. "Chris D'Agnolo" > wrote in message ... > Chuck, where are you located? What country? Sorry, I should know but I > guess I don't pay that much attention. I'm confused by your sentence; > > The 99 is turbocharged, and I hesitate to think what the testing facility > might > say. > > Maybe you're just trying to say that your 99 is turbocharged, help me out > here. > > Speaking of turbo Miatas, what year / years was the turbo available in > Australia, anybody remember? It was a predecessor to the MSM in the > states. > > Thanks, > Chris > > > "Chuck" > wrote in message > news >> If the 96 is OBDII, the underhood connector can be used (with the proper >> mating connector) by OBDII testing equipment. >> The OBDII digital data lines, ground, and maybe (don't remember) +12vdc >> are present on the OBDII underhood connector. >> An early 96 might be OBD1 >> There may be a sticker on the door post showing the SN, Trim Level, and >> date of build. >> I have a 99 model actually built in Dec 98, according to the sticker. The >> 99 is turbocharged, and I hesitate to think what the testing facility >> might say. (even with a "CARB" sticker) >> Fortunately, (Knock on Wood) we don't have to do such things here. There >> has been periodic talk of extending the mandatory testing areas to our >> locale, but, so far, nothing has come of it. >> >> "Frank Berger" > wrote in message >> m... >>> Took my Miata to a gas station for Texas inspection (past due, getting >>> nervous). The car is a '96 (actually, 96 1/2 according to the radio/cd >>> player that's in it). All the orginal paperwork says its a '96. >>> >>> Three mechanics couldn't find the OBD II connector they said was >>> supposed to be under the dash near the driver's right knee. There is a >>> connector labeled "diagnostics" under the hood on the driver's side. >>> They said that was a different connector and that I had to take the car >>> to a place with a dynamometer. I bought it new and no one ever moved or >>> removed anything as far as I know. >>> >>> I will take it back to the place that's been doing my inspections for >>> years without a problem. I think I would remember them using a >>> dynamometer, but I could be wrong. >>> >>> Any ideas? >>> >>> Thanks. >>> >> >> > |
#14
|
|||
|
|||
1996 and obd mystery
Sorry, news server burped, did not accept the first try, then when I tried
later, it took both the first try and the replacement. |
#15
|
|||
|
|||
1996 and obd mystery
Wow, I'm still confused, what's the A/M stand for ? And are you saying your
car is a 'prototype'? Chris 99BBB My 99 is A/M turbo'd "Chuck" > wrote in message ... > Sorry, news server burped, did not accept the first try, then when I tried > later, it took both the first try and the replacement. > |
#16
|
|||
|
|||
1996 and obd mystery
No, it was identical to a 99 red LS turbo that Mazda exhibited at several
major US auto shows. (Not planned, just happened) The turbo system on both was a Corky Bell/ Flyin Miata system. My 99's turbo system has since been upgraded to a slightly later version than that shown by Mazda. (also added Katskin seats, a 5th gear change, a larger radiator, frame stiffeners, larger diameter exhaust system, and a few other details since the original installation.) A/M=After Market (Obviously) <G> Sorry for the confusion. The "prototypes", as far as I know, were not sold via normal channels, and likely were either destroyed, or sold in the Japanese specialty market via Mazda Speed. All the Miata "prototypes" that I've seen were based upon Japanese Spec Miatas. It may also be that some of the Mazda Japan execs ended up with them for a bit. I was told that a handful were produced in very limited numbers for Japan only sale and use. Due to further changes, the Flyin Miata turbo system sold today is quite a bit different than the system installed on my 99. The most noticeable changes are rubber hoses instead of the old rather frumpy looking Corky Bell piping, and re-routing of the rubber hoses. Look at the Flyin Miata web site for pictures of the new system. "Chris D'Agnolo" > wrote in message ... > Wow, I'm still confused, what's the A/M stand for ? And are you saying > your car is a 'prototype'? > > Chris > 99BBB > > My 99 is A/M turbo'd > "Chuck" > wrote in message > ... >> Sorry, news server burped, did not accept the first try, then when I >> tried later, it took both the first try and the replacement. >> > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mystery | Dave | Driving | 1 | July 31st 08 04:38 AM |
Mystery Car | Halmyre[_2_] | Alfa Romeo | 2 | May 17th 08 06:35 PM |
The mystery | Paddy's Pig[_3_] | Auto Photos | 14 | March 1st 08 05:47 PM |
Mystery car! | STUK | Auto Photos | 5 | May 19th 07 09:51 PM |
mystery SUV | Lloyd Randall | Driving | 26 | December 28th 04 06:49 AM |