A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Ford Explorer
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

What do I need?????



 
 
Thread Tools Display Modes
  #1  
Old July 21st 05, 08:47 PM
jamiedee86
external usenet poster
 
Posts: n/a
Default What do I need?????

My dad recently rotated my tires on my 98 Ford Explorer (rear wheel drive)
and told me that my brake pads were like non existant. My moms mechanic
friend said he would only charge me labor if I gave him the parts. But I
am embarassed to ask what parts I need can anyone help me?

Ads
  #2  
Old July 21st 05, 09:57 PM
Charlie Bress
external usenet poster
 
Posts: n/a
Default


"Mark" > wrote in message
...
> On Thu, 21 Jul 2005 15:47:20 -0400, "jamiedee86"
> > wrote:
>
>>My dad recently rotated my tires on my 98 Ford Explorer (rear wheel drive)
>>and told me that my brake pads were like non existant. My moms mechanic
>>friend said he would only charge me labor if I gave him the parts. But I
>>am embarassed to ask what parts I need can anyone help me?

>
> You need brake pads. Go to your local auto parts store and tell them you
> need front and rear brake pads for a 98 Explorer. Just make sure you tell
> them if it's a V8 or V6. The pads for the V8 are larger up front. Last
> time I got pads they were something like $35 for the front pair and $29
> for
> the rear. Do yourself a favor and do not get pads that have a lifetime
> warranty. The don't wear out, but your rotors do wear. It's cheaper to
> replace pads than rotors.
>
> The mechanic friend may be able to get the parts cheaper if he's a "real"
> mechanic, but not if he's just a guy who does work out of his house.


Oh, oh! If the pads are non existent then I fear for the rotors. If the
mechanic in question has a shop and is ASE certified, ask him for a list of
needed parts. If he does not meet the requirements, go to a real shop and
get a professional job done. If you think that is expensive, consider the
costs involved if you hit somebody because you couldn't stop in time.

Charlie


  #3  
Old July 22nd 05, 02:04 AM
No Email Address
external usenet poster
 
Posts: n/a
Default

Mark, thank goodness for folks like you.

You are right.

--
Kindest regards

David Brown
Raleigh NC.



"Mark" > wrote in message
...
> On Thu, 21 Jul 2005 16:57:49 -0400, "Charlie Bress" >
> wrote:
>
>>
>>"Mark" > wrote in message
. ..
>>> On Thu, 21 Jul 2005 15:47:20 -0400, "jamiedee86"
>>> > wrote:
>>>
>>>>My dad recently rotated my tires on my 98 Ford Explorer (rear wheel
>>>>drive)
>>>>and told me that my brake pads were like non existant. My moms mechanic
>>>>friend said he would only charge me labor if I gave him the parts. But
>>>>I
>>>>am embarassed to ask what parts I need can anyone help me?
>>>
>>> You need brake pads. Go to your local auto parts store and tell them
>>> you
>>> need front and rear brake pads for a 98 Explorer. Just make sure you
>>> tell
>>> them if it's a V8 or V6. The pads for the V8 are larger up front. Last
>>> time I got pads they were something like $35 for the front pair and $29
>>> for
>>> the rear. Do yourself a favor and do not get pads that have a lifetime
>>> warranty. The don't wear out, but your rotors do wear. It's cheaper to
>>> replace pads than rotors.
>>>
>>> The mechanic friend may be able to get the parts cheaper if he's a
>>> "real"
>>> mechanic, but not if he's just a guy who does work out of his house.

>>
>>Oh, oh! If the pads are non existent then I fear for the rotors.

>
> jamiedee86 - do you hear any metallic noise when braking? Do you feel
> anything in the pedal when you brake - pulsing or maybe even a grinding
> feeling? If not, you're probably OK.
>
> The guy will be able to tell you when he replaces the pads. Let's not
> give
> this kid anything to panic about.
>
> Let me tell you a story that will probably make the purists cringe. Way
> back when, I had a vehicle with just front disc. When I bought it, there
> were visible gouges in both rotors. Obviously someone drove it for quite
> some time with no pads. There is no way they didn't hear ungodly noises
> coming from up there.
>
> So, being the cheap ******* I am, I bought a new set of pads and threw
> them
> on. Guess what? She felt like new again. It probably took all of 3
> stops
> before the pads wore in and seated to the rotor grooves. The pads didn't
> wear any shorter than other cars I've owned. Also, theoretically
> speaking,
> I should have been getting better braking since I had more surface area
> with all the grooves.
>
> Yes, this is true and yes, I would try it again if I ran in to the same
> situation. No, I don't expect any purist to agree with any of it.



  #4  
Old July 22nd 05, 02:13 AM
Searcher1
external usenet poster
 
Posts: n/a
Default

I have done the same thing, with my explorer, Last year I really didn't feel
like changing the rotors out, so I just replaced the pads and like yours
they seated just fine. THis year I did however change out the rotors, put on
new pads and hardware.

Searcher1


  #5  
Old July 22nd 05, 02:54 AM
Ulysses
external usenet poster
 
Posts: n/a
Default


"Searcher1" > wrote in message
news:nLXDe.26389$IJ1.12536@trnddc02...
> I have done the same thing, with my explorer, Last year I really didn't

feel
> like changing the rotors out, so I just replaced the pads and like yours
> they seated just fine. THis year I did however change out the rotors, put

on
> new pads and hardware.
>
> Searcher1
>
>

My experience is that the pads seem to wear out quicker when the rotors are
full of grooves. But, even if the pads don't seat themselves in the grooves
how much surface area are you really losing--10% maybe? I hope Ford did not
design the brakes so they would not be effective at 90%.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:18 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.