If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
How new a DOHC motor will easily replace the existing 96 DOHC in my SC-2?
My 96 Sc2, was just recently promoted to not being my daily driver. The car is great, served me well. Even though I've probably been too fussy about replacing parts it is still showing it's age, Now that I don't need to drive it every day, I can give major item loving care it needs. It has 189K on it, the automatic trans seems as good as new, however, the motor is showing signs of wear. When replacing the motor, I'm hoping to find a good used motor. However most of the used motors I'm seeing at wrecking yards have the expected mileage for their age. So how new can i go in model years and still get a motor which will work? Thanks Jim |
Ads |
#2
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
j.polley wrote:
> How new a DOHC motor will easily replace the existing 96 DOHC in my SC-2? > '97. That is the simple answer. The more complex answer is '98. The fuel rail is different. -- Kevin M. Keller Director, News & Promotions Saturn Performance Club |
#3
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
|
#5
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
Doug Miller wrote:
> > Right, and why replace instead of rebuild/recondition? > because often you can get a low mileage used motor for less than it would cost to rebuild. -- Kevin M. Keller Director, News & Promotions Saturn Performance Club |
#6
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
In article k.net>, Kevin > wrote:
>Doug Miller wrote: > >> Right, and why replace instead of rebuild/recondition? >> >because often you can get a low mileage used motor for less than it >would cost to rebuild. > Guess you missed the part where he said he's having trouble finding low-mileage used motors. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
#7
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
I have found several low-mileage used motors on eBay for a very good price.
Information on parts interchangeability can be found he http://www.saturnspot.com/forum/viewtopic.php?t=19927 A rebuild is almost never worth it unless you're doing it yourself to learn, or enjoy it as a hobby. It is a minimum of $1000 in parts and machining in addition to all your removal/assembly/installation labor. The last motor I bought on eBay was $200 and had 19k miles on it. As asked by another poster - exactly what is wrong with the current motor? Lane [ lane (at) evilplastic.com ] --- Visit my Saturn Car Audio and Performance Page at http://www.evilplastic.com "j.polley" > wrote in message news:znq7i.140729$_c5.111042@attbi_s22... > How new a DOHC motor will easily replace the existing 96 DOHC in my SC-2? > > My 96 Sc2, was just recently promoted to not being my daily driver. The > car is great, served me well. Even though I've probably been too fussy > about replacing parts it is still showing it's age, Now that I don't need > to drive it every day, I can give major item loving care it needs. It has > 189K on it, the automatic trans seems as good as new, however, the motor > is showing signs of wear. When replacing the motor, I'm hoping to find a > good used motor. However most of the used motors I'm seeing at wrecking > yards have the expected mileage for their age. So how new can i go in > model years and still get a motor which will work? > > Thanks > > Jim |
#8
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
Thanks for the advice and the link - It will be helpful, when I start on
this project. It's burning quite a bit of oil. Approx. a qt per 500 - 600 miles. Not exactly sure on the exact amount. If I drive it 2+ weeks (400 - 700 miles) it will need a quart. I'm not seeing any leakage either under the car, nor in the engine compartment. I'm not seeing smoke when I'm driving, idling or pulling away from stoplights. But on startup after sitting overnight I get quite a bit of smoke, enough to be able to see it drift by me as I back out of the driveway. This may be motor mount related, but recently I have been feeling a noticeable shake when idling in drive. If I put it in park or neutral then things smooth out. Thanks again Jim Lane wrote: > I have found several low-mileage used motors on eBay for a very good price. > > Information on parts interchangeability can be found he > http://www.saturnspot.com/forum/viewtopic.php?t=19927 > > A rebuild is almost never worth it unless you're doing it yourself to learn, > or enjoy it as a hobby. It is a minimum of $1000 in parts and machining in > addition to all your removal/assembly/installation labor. The last motor I > bought on eBay was $200 and had 19k miles on it. > > As asked by another poster - exactly what is wrong with the current motor? > > Lane [ lane (at) evilplastic.com ] > --- > Visit my Saturn Car Audio and Performance Page at http://www.evilplastic.com > > > "j.polley" > wrote in message > news:znq7i.140729$_c5.111042@attbi_s22... > >> How new a DOHC motor will easily replace the existing 96 DOHC in my SC-2? >> >> My 96 Sc2, was just recently promoted to not being my daily driver. The >> car is great, served me well. Even though I've probably been too fussy >> about replacing parts it is still showing it's age, Now that I don't need >> to drive it every day, I can give major item loving care it needs. It has >> 189K on it, the automatic trans seems as good as new, however, the motor >> is showing signs of wear. When replacing the motor, I'm hoping to find a >> good used motor. However most of the used motors I'm seeing at wrecking >> yards have the expected mileage for their age. So how new can i go in >> model years and still get a motor which will work? >> >> Thanks >> >> Jim >> > > > |
#9
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
In article <ZOM7i.142245$_c5.51377@attbi_s22>,
says... > Thanks for the advice and the link - It will be helpful, when I start on > this project. > > It's burning quite a bit of oil. Approx. a qt per 500 - 600 miles. Not > exactly sure on the exact amount. If I drive it 2+ weeks (400 - 700 > miles) it will need a quart. I'm not seeing any leakage either under > the car, nor in the engine compartment. I'm not seeing smoke when I'm > driving, idling or pulling away from stoplights. But on startup after > sitting overnight I get quite a bit of smoke, enough to be able to see > it drift by me as I back out of the driveway. > > This may be motor mount related, but recently I have been feeling a > noticeable shake when idling in drive. If I put it in park or neutral > then things smooth out. > > Thanks again > > Jim This was what I thought you were going to say! You're motor is likely still good. You just have stuck oil control rings. You need to do a piston soak to unstick them. The odds of getting your oil consuption under control is pretty good. Read this thread http://www.saturnfans.com/forums/showthread.php?t=23676 You can try MMO, Seafoam, or GM top engine cleaner for this. You should also do compression tests to see where you are before and after the soak. Far easier and cheaper than replacing the engine! |
#10
|
|||
|
|||
How new a DOHC motor will easily replace the existing 96 DOHC?
I have, for years, used @ 8oz of MMO in the crankcase a week or so
before an oil change. I had not thought of using MMO or Seafoam in this way. Thanks Jim BläBlä wrote: > In article <ZOM7i.142245$_c5.51377@attbi_s22>, > says... > >> Thanks for the advice and the link - It will be helpful, when I start on >> this project. >> >> It's burning quite a bit of oil. Approx. a qt per 500 - 600 miles. Not >> exactly sure on the exact amount. If I drive it 2+ weeks (400 - 700 >> miles) it will need a quart. I'm not seeing any leakage either under >> the car, nor in the engine compartment. I'm not seeing smoke when I'm >> driving, idling or pulling away from stoplights. But on startup after >> sitting overnight I get quite a bit of smoke, enough to be able to see >> it drift by me as I back out of the driveway. >> >> This may be motor mount related, but recently I have been feeling a >> noticeable shake when idling in drive. If I put it in park or neutral >> then things smooth out. >> >> Thanks again >> >> Jim >> > > This was what I thought you were going to say! You're motor is likely > still good. You just have stuck oil control rings. You need to do a > piston soak to unstick them. The odds of getting your oil consuption > under control is pretty good. > > Read this thread > http://www.saturnfans.com/forums/showthread.php?t=23676 > You can try MMO, Seafoam, or GM top engine cleaner for this. > > You should also do compression tests to see where you are before and > after the soak. > > Far easier and cheaper than replacing the engine! > > > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
98 neon r/t dohc | shumi2 | Dodge | 3 | February 12th 07 12:53 AM |
LF 95 Neon dohc | sloan | Technology | 0 | October 19th 05 11:54 PM |
95 SL2 DOHC NOx failure | Bob | Saturn | 1 | June 8th 05 12:39 AM |
Real benefits of DOHC | Masospaghetti | Technology | 35 | April 9th 05 03:30 PM |
GM 3.4L DOHC engine-1995 | Mr. Smith | Technology | 0 | January 9th 05 11:05 PM |