If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Do CV joints squeal ?
My 2002 SL1 75000km auto
front suspension started to make squeal noise not engine related but at the start of a drive - no time for bearing to heat up yet. I pulled a u-turn back to my garage & put the front end up on a jack spun and wiggled both front wheels - slight squeak from right for just a second or 2 noise went away & I drove home - 20 miles - no noise. Any guesses ? I didn't do any parking lot turning-tests for CV joint yet - under normal driving - it seemed OK. Thanks ; John T |
Ads |
#2
|
|||
|
|||
Do CV joints squeal ?
OK I'll answer my own question ... Saturn dealer originally quoted about $ 750. plus 3 hours labour to replace the complete RF axle due to hanger bearing noise. I questioned it rather strongly - then after the service person consulted the mechanic - a hanger bearing kit was agreed to. ($60. plus 1.5 hours labour) But, of course - they found a head gasket leak ... I'm beginning to regret I ever heard of Saturn. Until next time .. John T. >My 2002 SL1 75000km auto >front suspension started to make squeal noise >not engine related >but at the start of a drive - no time for bearing to heat up yet. >I pulled a u-turn back to my garage & put the front end up on a jack >spun and wiggled both front wheels - slight squeak from right for just >a second or 2 >noise went away & I drove home - 20 miles - no noise. > Any guesses ? >I didn't do any parking lot turning-tests for CV joint yet - under >normal driving - it seemed OK. > Thanks ; > John T |
#3
|
|||
|
|||
Do CV joints squeal ?
I got a reman axle from AutoZone for under $80 about a month ago and changed
it myself using a $10 Haynes manual with about an hour's work. If you have a bit of patience, confidence, and a decent set of tools, you may want to consider rolling up your sleeves for future repairs? If a person has the time and willingness to learn, saving a lot of money really gives you an enormous 'job well done' feeling of satisfaction. $750 is unreal. I don't know how these dealers live with themselves when charging people those kind of prices. Lane [ lane (at) evilplastic.com ] --- Visit my Saturn Car Audio and Performance Page at http://www.evilplastic.com "_jj_" > wrote in message ... > > OK I'll answer my own question ... > Saturn dealer originally quoted about $ 750. plus 3 hours labour > to replace the complete RF axle due to hanger bearing noise. > I questioned it rather strongly - then after the service person > consulted the mechanic - a hanger bearing kit was agreed to. > ($60. plus 1.5 hours labour) > But, of course - they found a head gasket leak ... > I'm beginning to regret I ever heard of Saturn. > Until next time .. > John T. > > > >>My 2002 SL1 75000km auto >>front suspension started to make squeal noise >>not engine related >>but at the start of a drive - no time for bearing to heat up yet. >>I pulled a u-turn back to my garage & put the front end up on a jack >>spun and wiggled both front wheels - slight squeak from right for just >>a second or 2 >>noise went away & I drove home - 20 miles - no noise. >> Any guesses ? >>I didn't do any parking lot turning-tests for CV joint yet - under >>normal driving - it seemed OK. >> Thanks ; >> John T > |
#4
|
|||
|
|||
Do CV joints squeal ?
Thanks for your reply, Lane.
The $ 750 was axle assembly - including CV joints; hanger bearing; .. not sure what else .. My local garage phoned-around after talking to the Saturn dealer - but no luck with after market suppliers. As for doing the work myself - my past attempts at auto repair have usually proved futile - I have vivid memories of a 5 hour oil change on a 72 Vega that had the filter seized on ... I think I invented a few new swear words, that day. JT >I got a reman axle from AutoZone for under $80 about a month ago and changed >it myself using a $10 Haynes manual with about an hour's work. If you have >a bit of patience, confidence, and a decent set of tools, you may want to >consider rolling up your sleeves for future repairs? If a person has the >time and willingness to learn, saving a lot of money really gives you an >enormous 'job well done' feeling of satisfaction. >$750 is unreal. I don't know how these dealers live with themselves when >charging people those kind of prices. >Lane [ lane (at) evilplastic.com ] >> OK I'll answer my own question ... >> Saturn dealer originally quoted about $ 750. plus 3 hours labour >> to replace the complete RF axle due to hanger bearing noise. >> I questioned it rather strongly - then after the service person >> consulted the mechanic - a hanger bearing kit was agreed to. >> ($60. plus 1.5 hours labour) >> But, of course - they found a head gasket leak ... >> I'm beginning to regret I ever heard of Saturn. >> Until next time .. >> John T. >> >> >>>My 2002 SL1 75000km auto >>>front suspension started to make squeal noise >>>not engine related >>>but at the start of a drive - no time for bearing to heat up yet. >>>I pulled a u-turn back to my garage & put the front end up on a jack >>>spun and wiggled both front wheels - slight squeak from right for just >>>a second or 2 >>>noise went away & I drove home - 20 miles - no noise. >>> Any guesses ? >>>I didn't do any parking lot turning-tests for CV joint yet - under >>>normal driving - it seemed OK. >>> Thanks ; >>> John T |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
99 XLS Squeal when key is turned off | Lance | Ford Explorer | 0 | April 12th 06 04:34 PM |
Squeal at start up ? | Pd7704 | Honda | 5 | March 2nd 06 02:47 PM |
P/S belt squeal won't go away | KWW | Honda | 3 | February 13th 06 10:21 PM |
97 T+C squeal | flobert | Dodge | 5 | December 19th 05 05:09 AM |
Terrible Squeal | Sandra Ries | Saturn | 10 | March 15th 05 02:11 PM |