If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
gpl setups hotlaps
hi,
i downloaded some setups from http://gpl.rulez.jp/setups/index.html but gpl can't see them...i renamed in .lo1 or fe.1, but they don't appear on "current " in car setup (only on "race", but then i drive with the default setup!) any suggestions? thx |
Ads |
#2
|
|||
|
|||
"nik" > wrote in message
... > hi, > i downloaded some setups from > http://gpl.rulez.jp/setups/index.html > but gpl can't see them...i renamed in .lo1 or fe.1, but they don't appear on > "current " in car setup (only on "race", but then i drive with the default > setup!) > any suggestions? > thx I take it you are downloading them somewhere & then extracting the file to the relevant setup folder? Inside each zip file you will find a replay that you save to your \sierra\gpl\replay\ folder, and a setup that you save to \sierra\gpl\players\<playername>\<trackname>\ Once you have saved the setup in the right place when you are in gpl you should be able to select it from the list of available setups for that car & track combination. Both the 'current' and 'race' setup selectors look in the same place so if one works the other one will too. hth, Malc. |
#3
|
|||
|
|||
Malc wrote: > "nik" > wrote in message > ... > > hi, > > i downloaded some setups from > > http://gpl.rulez.jp/setups/index.html > > but gpl can't see them...i renamed in .lo1 or fe.1, but they don't appear > on > > "current " in car setup (only on "race", but then i drive with the default > > setup!) > > any suggestions? > > thx > The setups ending in 1 as in *.lo1 are for the Grand Prix cars. If you're driving the Advanced Trainers for instance, you won't see any of those setups. The Advanced Trainer setups end in a 2 as in *.lo2 and the Basic Trainers use 3. The car type is selected in the track selection menu. |
#4
|
|||
|
|||
> ha scritto nel messaggio oups.com... > > Malc wrote: > > "nik" > wrote in message > > ... > > > hi, > > > i downloaded some setups from > > > http://gpl.rulez.jp/setups/index.html > > > but gpl can't see them...i renamed in .lo1 or fe.1, but they don't > appear > > on > > > "current " in car setup (only on "race", but then i drive with the > default > > > setup!) > > > any suggestions? > > > thx > > > The setups ending in 1 as in *.lo1 are for the Grand Prix cars. If > you're driving the Advanced Trainers for instance, you won't see any of > those setups. The Advanced Trainer setups end in a 2 as in *.lo2 and > the Basic Trainers use 3. > The car type is selected in the track selection menu. thx guys, but the problem was that i need the Gpl Analyzer to view them!!! :-))) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nascar 2003 - Car Setups | John Hellingsworth | Simulators | 4 | November 1st 04 05:33 PM |
Setups for RBR MG ZR? | Stuart Becktell | Simulators | 3 | October 26th 04 04:52 PM |