A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Jeep
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

wiring a XJ hitch



 
 
Thread Tools Display Modes
  #1  
Old August 8th 06, 05:59 AM posted to rec.autos.makers.jeep+willys
AWantz
external usenet poster
 
Posts: 6
Default wiring a XJ hitch

I've got a 88 XJ and I'm wiring a hitch. Do I Need a converter since
the tail lights and brake lights are operated with 2 different wires??

Ads
  #2  
Old August 8th 06, 03:02 PM posted to rec.autos.makers.jeep+willys
Jeff Strickland[_1_]
external usenet poster
 
Posts: 419
Default wiring a XJ hitch

The determing factor is if the Trun Signals and the Brake Lights use the
SAME bulb. If they do, then you do not need a converter, if they each use
their own bulb, then you will need the converter.

Another way to tell is if they have a converter at the store that fits your
vehicle, then you will be needing to buy one.




"AWantz" > wrote in message
oups.com...
> I've got a 88 XJ and I'm wiring a hitch. Do I Need a converter since
> the tail lights and brake lights are operated with 2 different wires??
>


  #3  
Old August 8th 06, 03:07 PM posted to rec.autos.makers.jeep+willys
Jeff Strickland[_1_]
external usenet poster
 
Posts: 419
Default wiring a XJ hitch

OUCH! Those are expensive.

I can get a flat 4-pin for a Wrangler/CJ for about $5.00, AND that includes
both sides of the connector and several feet of wire.

PS
That link does not clear up the OP's question because several of the high
priced units they list have the converter built in. All that link shows is
that one can get a trailer harness that is easy to connect.







"L.W.(Bill) Hughes III" > wrote in message
...
> No: http://www.accessconnect.com/trailerwiring.htm
> http://www.etrailer.com/faq/wiring.asp
> God Bless America, Bill O|||||||O
> http://www.billhughes.com/
>
> AWantz wrote:
>>
>> I've got a 88 XJ and I'm wiring a hitch. Do I Need a converter since
>> the tail lights and brake lights are operated with 2 different wires??


  #4  
Old August 8th 06, 10:23 PM posted to rec.autos.makers.jeep+willys
L.W.(Bill) Hughes III[_1_]
external usenet poster
 
Posts: 3,109
Default wiring a XJ hitch

Oh Jeffy,
Maybe if you thought a while you would agree it's nice to have the
color codes, and the fact that they don't sell a converter for his
truck, should answer the question whether one was needed. Understand?
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Jeff Strickland wrote:
>
> OUCH! Those are expensive.
>
> I can get a flat 4-pin for a Wrangler/CJ for about $5.00, AND that includes
> both sides of the connector and several feet of wire.
>
> PS
> That link does not clear up the OP's question because several of the high
> priced units they list have the converter built in. All that link shows is
> that one can get a trailer harness that is easy to connect.

  #5  
Old August 9th 06, 02:02 AM posted to rec.autos.makers.jeep+willys
philthy
external usenet poster
 
Posts: 114
Default wiring a XJ hitch

yes

AWantz wrote:

> I've got a 88 XJ and I'm wiring a hitch. Do I Need a converter since
> the tail lights and brake lights are operated with 2 different wires??


  #6  
Old August 9th 06, 03:48 PM posted to rec.autos.makers.jeep+willys
Jeff Strickland[_1_]
external usenet poster
 
Posts: 419
Default wiring a XJ hitch

WalMart sells the harness the guy needs complete with color codes for a
fraction of the prices listed in your link.

And "they" include the needed converter in the connection kit, so it is
difficult to determine if a converter is needed or not unless one assumes
the over priced $45.00 kit includes a converter while the over priced $25.00
kit does not. The ONLY reason to buy this product is to avoid splicing
wires. The company provides a simple connector that plugs into the existing
wire harness.

<quote>
Taillight converter included with kits when needed.
</quote>










"L.W.(Bill) Hughes III" > wrote in message
...
> Oh Jeffy,
> Maybe if you thought a while you would agree it's nice to have the
> color codes, and the fact that they don't sell a converter for his
> truck, should answer the question whether one was needed. Understand?
> God Bless America, Bill O|||||||O
> http://www.billhughes.com/
>
> Jeff Strickland wrote:
>>
>> OUCH! Those are expensive.
>>
>> I can get a flat 4-pin for a Wrangler/CJ for about $5.00, AND that
>> includes
>> both sides of the connector and several feet of wire.
>>
>> PS
>> That link does not clear up the OP's question because several of the high
>> priced units they list have the converter built in. All that link shows
>> is
>> that one can get a trailer harness that is easy to connect.


  #7  
Old August 9th 06, 10:43 PM posted to rec.autos.makers.jeep+willys
L.W.(Bill) Hughes III[_1_]
external usenet poster
 
Posts: 3,109
Default wiring a XJ hitch

Find, lets have the link with the color codes for our news group.
There was no adapter listed for his '88 XJ.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Jeff Strickland wrote:
>
> WalMart sells the harness the guy needs complete with color codes for a
> fraction of the prices listed in your link.
>
> And "they" include the needed converter in the connection kit, so it is
> difficult to determine if a converter is needed or not unless one assumes
> the over priced $45.00 kit includes a converter while the over priced $25.00
> kit does not. The ONLY reason to buy this product is to avoid splicing
> wires. The company provides a simple connector that plugs into the existing
> wire harness.
>
> <quote>
> Taillight converter included with kits when needed.
> </quote>

  #8  
Old August 10th 06, 12:17 AM posted to rec.autos.makers.jeep+willys
Mike Romain
external usenet poster
 
Posts: 3,758
Default wiring a XJ hitch

My 88 and 87 hitches are wired direct. Never used them, but that is
what I have.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

"L.W.(Bill) Hughes III" wrote:
>
> Find, lets have the link with the color codes for our news group.
> There was no adapter listed for his '88 XJ.
> God Bless America, Bill O|||||||O
> http://www.billhughes.com/
>
> Jeff Strickland wrote:
> >
> > WalMart sells the harness the guy needs complete with color codes for a
> > fraction of the prices listed in your link.
> >
> > And "they" include the needed converter in the connection kit, so it is
> > difficult to determine if a converter is needed or not unless one assumes
> > the over priced $45.00 kit includes a converter while the over priced $25.00
> > kit does not. The ONLY reason to buy this product is to avoid splicing
> > wires. The company provides a simple connector that plugs into the existing
> > wire harness.
> >
> > <quote>
> > Taillight converter included with kits when needed.
> > </quote>

  #9  
Old August 10th 06, 01:13 AM posted to rec.autos.makers.jeep+willys
L.W.(Bill) Hughes III[_1_]
external usenet poster
 
Posts: 3,109
Default wiring a XJ hitch

That was what I was trying to tell Jeff. The reason I just said
"no" to the poster's question.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Mike Romain wrote:
>
> My 88 and 87 hitches are wired direct. Never used them, but that is
> what I have.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

  #10  
Old August 10th 06, 04:38 AM posted to rec.autos.makers.jeep+willys
Jeff Strickland[_1_]
external usenet poster
 
Posts: 419
Default wiring a XJ hitch

Bill,
You're missing the point. There is no adapter listed for any of them BECAUSE
the adaptor is included if it is needed.

Your link is good because it offers a product that is "plug-n-pray", no
splicing or anything like that. Simply locate a connector, unplug it, plug
the "thingie" in, and reconnect the other side of the original connector to
the other side of the thingie.

The problem is, I can get a flat 4-pin for around $10 that includes both
sides of the wire harness (the vehicle side and the trailer side) and
something on the order of 15 ft of wire. I have to lcoate the wires on the
tow vehicle that I'm interested in, and I have to make splices. But, I save
$20, or more, for my trouble. And, I get all of the color codes I need ...





"L.W.(Bill) Hughes III" > wrote in message
...
> Find, lets have the link with the color codes for our news group.
> There was no adapter listed for his '88 XJ.
> God Bless America, Bill O|||||||O
> http://www.billhughes.com/
>
> Jeff Strickland wrote:
>>
>> WalMart sells the harness the guy needs complete with color codes for a
>> fraction of the prices listed in your link.
>>
>> And "they" include the needed converter in the connection kit, so it is
>> difficult to determine if a converter is needed or not unless one assumes
>> the over priced $45.00 kit includes a converter while the over priced
>> $25.00
>> kit does not. The ONLY reason to buy this product is to avoid splicing
>> wires. The company provides a simple connector that plugs into the
>> existing
>> wire harness.
>>
>> <quote>
>> Taillight converter included with kits when needed.
>> </quote>


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tailight Wiring Problem [email protected] VW air cooled 8 March 16th 06 01:25 AM
2003 CRV and Tow hitch questions I can't do that, Dave Honda 2 January 28th 06 06:15 PM
Fire Damage Wiring Repair [email protected] Jeep 31 December 24th 05 09:13 PM
GC Hitch Jo Bo Jeep 0 November 15th 05 11:15 PM
Which Trailer hitch for a Chrysler T&C? [email protected] Chrysler 2 May 17th 05 11:43 AM


All times are GMT +1. The time now is 08:20 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.