If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
mic canic wrote:
> when you use a scope and amp the signal twice you cut off the freq at the top of > the wave hence the word clipping and you can watch it on a scope it becomes a > stright line then drops bac down > doubt my words try hooking up a eq after a 2 channel high power radio has been > installed and use all high level wires to hook it up Only if you are overdriving one of the amps. Keep within the capability of the amp and you can cascade several before distortion becomes a significant factor. Matt |
Ads |
#32
|
|||
|
|||
On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
> when you use a scope and amp the signal twice you cut off the freq at > the top of the wave hence the word clipping and you can watch it on a > scope it becomes a stright line then drops bac down > doubt my words try hooking up a eq after a 2 channel high power radio > has been installed and use all high level wires to hook it up You're clueless. Don't post again until you learn a little about what you're talking about. -- If you're not on the edge, you're taking up too much space. Linux Registered User #327951 |
#33
|
|||
|
|||
On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
> when you use a scope and amp the signal twice you cut off the freq at > the top of the wave hence the word clipping and you can watch it on a > scope it becomes a stright line then drops bac down > doubt my words try hooking up a eq after a 2 channel high power radio > has been installed and use all high level wires to hook it up You're clueless. Don't post again until you learn a little about what you're talking about. -- If you're not on the edge, you're taking up too much space. Linux Registered User #327951 |
#34
|
|||
|
|||
i know exactly what i'm talking about i just can't seem to word it correctly
i can safely say i have forgotten more then u will know Dan C wrote: > On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote: > > > when you use a scope and amp the signal twice you cut off the freq at > > the top of the wave hence the word clipping and you can watch it on a > > scope it becomes a stright line then drops bac down > > doubt my words try hooking up a eq after a 2 channel high power radio > > has been installed and use all high level wires to hook it up > > You're clueless. Don't post again until you learn a little about what > you're talking about. > > -- > If you're not on the edge, you're taking up too much space. > Linux Registered User #327951 |
#35
|
|||
|
|||
i know exactly what i'm talking about i just can't seem to word it correctly
i can safely say i have forgotten more then u will know Dan C wrote: > On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote: > > > when you use a scope and amp the signal twice you cut off the freq at > > the top of the wave hence the word clipping and you can watch it on a > > scope it becomes a stright line then drops bac down > > doubt my words try hooking up a eq after a 2 channel high power radio > > has been installed and use all high level wires to hook it up > > You're clueless. Don't post again until you learn a little about what > you're talking about. > > -- > If you're not on the edge, you're taking up too much space. > Linux Registered User #327951 |
#36
|
|||
|
|||
mic canic wrote:
> i know exactly what i'm talking about i just can't seem to word it correctly > > i can safely say i have forgotten more then u will know > > Dan C wrote: > > >>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote: >> >> >>>when you use a scope and amp the signal twice you cut off the freq at >>>the top of the wave hence the word clipping and you can watch it on a >>>scope it becomes a stright line then drops bac down >>>doubt my words try hooking up a eq after a 2 channel high power radio >>>has been installed and use all high level wires to hook it up >> >>You're clueless. Don't post again until you learn a little about what >>you're talking about. >> >>-- >>If you're not on the edge, you're taking up too much space. >>Linux Registered User #327951 > > Trouble is, you've also forgotten as much as you ever knew. You don't know what you are talking about in this case, no matter how you worded it. Matt |
#37
|
|||
|
|||
mic canic wrote:
> i know exactly what i'm talking about i just can't seem to word it correctly > > i can safely say i have forgotten more then u will know > > Dan C wrote: > > >>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote: >> >> >>>when you use a scope and amp the signal twice you cut off the freq at >>>the top of the wave hence the word clipping and you can watch it on a >>>scope it becomes a stright line then drops bac down >>>doubt my words try hooking up a eq after a 2 channel high power radio >>>has been installed and use all high level wires to hook it up >> >>You're clueless. Don't post again until you learn a little about what >>you're talking about. >> >>-- >>If you're not on the edge, you're taking up too much space. >>Linux Registered User #327951 > > Trouble is, you've also forgotten as much as you ever knew. You don't know what you are talking about in this case, no matter how you worded it. Matt |
#38
|
|||
|
|||
matt i do know what i'm talking about
and would like to know what makes you such a expert in cars? because you own one ! asshole Matt Whiting wrote: > mic canic wrote: > > i know exactly what i'm talking about i just can't seem to word it correctly > > > > i can safely say i have forgotten more then u will know > > > > Dan C wrote: > > > > > >>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote: > >> > >> > >>>when you use a scope and amp the signal twice you cut off the freq at > >>>the top of the wave hence the word clipping and you can watch it on a > >>>scope it becomes a stright line then drops bac down > >>>doubt my words try hooking up a eq after a 2 channel high power radio > >>>has been installed and use all high level wires to hook it up > >> > >>You're clueless. Don't post again until you learn a little about what > >>you're talking about. > >> > >>-- > >>If you're not on the edge, you're taking up too much space. > >>Linux Registered User #327951 > > > > > > Trouble is, you've also forgotten as much as you ever knew. You don't > know what you are talking about in this case, no matter how you worded it. > > Matt |
#39
|
|||
|
|||
matt i do know what i'm talking about
and would like to know what makes you such a expert in cars? because you own one ! asshole Matt Whiting wrote: > mic canic wrote: > > i know exactly what i'm talking about i just can't seem to word it correctly > > > > i can safely say i have forgotten more then u will know > > > > Dan C wrote: > > > > > >>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote: > >> > >> > >>>when you use a scope and amp the signal twice you cut off the freq at > >>>the top of the wave hence the word clipping and you can watch it on a > >>>scope it becomes a stright line then drops bac down > >>>doubt my words try hooking up a eq after a 2 channel high power radio > >>>has been installed and use all high level wires to hook it up > >> > >>You're clueless. Don't post again until you learn a little about what > >>you're talking about. > >> > >>-- > >>If you're not on the edge, you're taking up too much space. > >>Linux Registered User #327951 > > > > > > Trouble is, you've also forgotten as much as you ever knew. You don't > know what you are talking about in this case, no matter how you worded it. > > Matt |
#40
|
|||
|
|||
mic canic wrote:
> matt i do know what i'm talking about > and would like to know what makes you such a expert in cars? because you own one ! > asshole > > > > Matt Whiting wrote: > > >>mic canic wrote: >> >>>i know exactly what i'm talking about i just can't seem to word it correctly >>> >>>i can safely say i have forgotten more then u will know >>> >>>Dan C wrote: >>> >>> >>> >>>>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote: >>>> >>>> >>>> >>>>>when you use a scope and amp the signal twice you cut off the freq at >>>>>the top of the wave hence the word clipping and you can watch it on a >>>>>scope it becomes a stright line then drops bac down >>>>>doubt my words try hooking up a eq after a 2 channel high power radio >>>>>has been installed and use all high level wires to hook it up >>>> >>>>You're clueless. Don't post again until you learn a little about what >>>>you're talking about. >>>> >>>>-- >>>>If you're not on the edge, you're taking up too much space. >>>>Linux Registered User #327951 >>> >>> >>Trouble is, you've also forgotten as much as you ever knew. You don't >>know what you are talking about in this case, no matter how you worded it. >> >>Matt Well, for starters, I know enough to post at the bottom. Second, the topic is more electronics than cars and I'm an EE and PE. What are your qualifications to talk about electronic amplifiers? Lastly, I have sufficient vocabulary to enable me to express myself without the need to resort to vulgarity, which is the bastion of the ignorant. Matt |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problems! 2000 Caravan Sport and Infinity Sound | Snydley | Dodge | 42 | January 3rd 05 07:15 PM |