If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
CD changer in dash flashing
"-Almazick-" > wrote in message ... > Can you please tell me in 1 or 2 sentences what needs to be done inside of > CD Changer and if you have a schematic for cd changer that's a big plus for > me.. > > Anyone with a background in VCR repair could probably fix the unit without benefit of a schematic - as long as one of the chips on the board hasn't gone bad. This is one of those questions where if you have to ask, you don't have the skills to fix it. Go to your local community college and take a 2 year program on electronic service technology, when you get out of it you will know how to fix your CD changer. Where exactly that qualifies you to work in these days of disposable cheap electronic gear from China, I have no clue. Ted |
Ads |
#12
|
|||
|
|||
CD changer in dash flashing
Ted Mittelstaedt wrote: > "-Almazick-" > wrote in message > ... > >>Can you please tell me in 1 or 2 sentences what needs to be done inside of >>CD Changer and if you have a schematic for cd changer that's a big plus > > for > >>me.. >> >> > > > Anyone with a background in VCR repair could probably fix the unit without > benefit of a schematic - as long as one of the chips on the board hasn't > gone > bad. This is one of those questions where if you have to ask, you don't > have > the skills to fix it. > > Go to your local community college and take a 2 year program on electronic > service technology, when you get out of it you will know how to fix your CD > changer. Where exactly that qualifies you to work in these days of > disposable > cheap electronic gear from China, I have no clue. > > Ted Hi Ted... Please consider not even joking about suggesting it as a career for young folks... Until the Asian dirt cheap import situation changes you'd be better off recommending they take a two year course in the maintenance of hand crank starter systems I guess I was lucky (?) enough to retire before 19 dollar disposable stuff hit the market, but I sure have seen an awful lot of really good service shops collapse since Scary is the possibility that they (the Chinese) might make disposable cars one day. Five to ten thousand bucks, a five year guarantee, and they'll completely destroy yet another North American industry. Take care. Ken |
#13
|
|||
|
|||
CD changer in dash flashing
and what kind of car is a kia and Hyundai is ????
Ken Weitzel wrote: > Ted Mittelstaedt wrote: > > > "-Almazick-" > wrote in message > > ... > > > >>Can you please tell me in 1 or 2 sentences what needs to be done inside of > >>CD Changer and if you have a schematic for cd changer that's a big plus > > > > for > > > >>me.. > >> > >> > > > > > > Anyone with a background in VCR repair could probably fix the unit without > > benefit of a schematic - as long as one of the chips on the board hasn't > > gone > > bad. This is one of those questions where if you have to ask, you don't > > have > > the skills to fix it. > > > > Go to your local community college and take a 2 year program on electronic > > service technology, when you get out of it you will know how to fix your CD > > changer. Where exactly that qualifies you to work in these days of > > disposable > > cheap electronic gear from China, I have no clue. > > > > Ted > > Hi Ted... > > Please consider not even joking about suggesting it as a career for > young folks... > > Until the Asian dirt cheap import situation changes you'd be better > off recommending they take a two year course in the maintenance > of hand crank starter systems > > I guess I was lucky (?) enough to retire before 19 dollar disposable > stuff hit the market, but I sure have seen an awful lot of really > good service shops collapse since > > Scary is the possibility that they (the Chinese) might make > disposable cars one day. Five to ten thousand bucks, a five > year guarantee, and they'll completely destroy yet another North > American industry. > > Take care. > > Ken |
#14
|
|||
|
|||
CD changer in dash flashing
"Ken Weitzel" > wrote in message news:FPdkg.32413$IK3.5573@pd7tw1no... > > > Ted Mittelstaedt wrote: > > > "-Almazick-" > wrote in message > > ... > > > >>Can you please tell me in 1 or 2 sentences what needs to be done inside of > >>CD Changer and if you have a schematic for cd changer that's a big plus > > > > for > > > >>me.. > >> > >> > > > > > > Anyone with a background in VCR repair could probably fix the unit without > > benefit of a schematic - as long as one of the chips on the board hasn't > > gone > > bad. This is one of those questions where if you have to ask, you don't > > have > > the skills to fix it. > > > > Go to your local community college and take a 2 year program on electronic > > service technology, when you get out of it you will know how to fix your CD > > changer. Where exactly that qualifies you to work in these days of > > disposable > > cheap electronic gear from China, I have no clue. > > > > Ted > > Hi Ted... > > Please consider not even joking about suggesting it as a career for > young folks... > I took a year and 1 quarter of EST back in 1986, the first year was great since it was all electronic theory, the second year was when we started to get into repairing devices, it got boring real fast, it was pretty obvious even then that repairable devices with discrete components were not going to last in the market. > Until the Asian dirt cheap import situation changes you'd be better > off recommending they take a two year course in the maintenance > of hand crank starter systems > Oh no, I would never seriously tell anyone to go into EST today - do they even still offer such? We all know where the demographics are pointing - health care, driven by the retiring baby boomers. If you can be a doctor or a nurse you have it made, or a health system administrator, or a malpractice lawyer. That's where the profitable jobs are going to be. > I guess I was lucky (?) enough to retire before 19 dollar disposable > stuff hit the market, but I sure have seen an awful lot of really > good service shops collapse since > Yeah, the only consumer electronics that are getting repaired anymore are done under warranty, and so many of those warranty claims anymore are being returned to a central national repair center in California or some such where the repair tech does the same device all day long, so they are so familiar with it they can just burn through the devices lickety split. Here's an example for you of how futile it is, about 5 years ago I bought a car battery charger for about $50. I used it a couple times over the year and one day I stupidly left it out overnight and it got rained on while plugged in. So I figured, busted bridge rectifier, I'll open it up and have it replaced for a couple bucks. I opened it and discovered a power transistor regulator controlled by a speciallized battery charger chip. OK so I called the manufacturer, and bought a replacement board with charger chip, about $15 plus $5 shipping. While waiting for the board in the mail one day my wife says "look on Ebay here someone is selling a battery charger" and sure enough, same manufacturer and power rating of charger as mine, older model, for sale $10, locally. I bid the $10 for the hell of it, and sure enough, won the charger, drove over to the guys house about 10 minutes away, bought charger. I still have the brand new regulator board and the busted charger, I never got around to fixing it. And, the older model charger I bought (with a simpler circuit) has been rained on a couple times by accident since and didn't die. Go figure. It is nice to know how to fix the stuff, but it is so not cost effective it's rediculous. For example on the OP's problem, if it was mine I could probably fix it - but it would mean at least 2 hours setting up the test jig for it, figuring out where all the hidden screws are and pulling it apart, then if it didn't have a mechanical failure at least an hour on the phone with various places in California ordering the replacement logic board, then another hour putting everything back together. And the logic board itself would probably cost $150. And what you end up with is a changer that is running, but has worn mechanicals inside of it, and is probably going to jam up within a year just due to that. And for the 4 hours spent screwing with it, I could spend that same time doing air conditioning or brake work on my vehicle which would save a -hell- of a lot more money, and spend 20 minutes buying an iPod auto FM modulator and coupling that to a plain old factory AM/FM radio in the car that is of zero interest to car stereo thieves and that I could probably buy from a wrecker for $5. > Scary is the possibility that they (the Chinese) might make > disposable cars one day. Five to ten thousand bucks, a five > year guarantee, and they'll completely destroy yet another North > American industry. > Someone is going to have to repair them when they break down under the 5 year warranty - it won't destroy the vehicle repair industry but it will destroy the non-dealership repair industry. Ted |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Flashing dash on my 97 Jeep Grand Cherokee | Selmabody2 | Chrysler | 1 | March 15th 06 11:34 AM |
Flashing dash on my 97 Jeep Grand Cherokee | Selmabody2 | Chrysler | 0 | March 14th 06 05:59 AM |
Flashing 4X4 wheel dash light help.... | Hank | Technology | 10 | November 18th 05 12:26 AM |
Parking Brake Dash Light Flashing | Wry-mouth | Jeep | 2 | July 19th 05 02:36 AM |
1998 Town and Country -- Flashing Dash Lights | kevin | Chrysler | 1 | July 11th 05 11:51 PM |