If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
And you thought your alternator was crazy
Reading my email at the office this AM, found a new offering from
International Rectifier. They have a new regulator mechanism that gets built into the alternator. Similar to the ones used for years except now there is a serial communication link between the alternator and bcm/ecu modules. http://www.irf.com/whats-new/nr041020.html So, in the years to come, diagnosing a bad alternator gets either more complicated or easier depending on what tools will be available. My big beef with the diagnostic tools that are available to us vehicle owners is that they only will read codes (and signals on the more elaborate readers). There is nothing that will allow you to perform actuator tests (read only and no write control). Oppie |
Ads |
Thread Tools | |
Display Modes | |
|
|