A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Chrysler
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Problems! 2000 Caravan Sport and Infinity Sound



 
 
Thread Tools Display Modes
  #31  
Old October 20th 04, 01:58 AM
Matt Whiting
external usenet poster
 
Posts: n/a
Default

mic canic wrote:

> when you use a scope and amp the signal twice you cut off the freq at the top of
> the wave hence the word clipping and you can watch it on a scope it becomes a
> stright line then drops bac down
> doubt my words try hooking up a eq after a 2 channel high power radio has been
> installed and use all high level wires to hook it up


Only if you are overdriving one of the amps. Keep within the capability
of the amp and you can cascade several before distortion becomes a
significant factor.


Matt

Ads
  #32  
Old October 20th 04, 08:07 PM
Dan C
external usenet poster
 
Posts: n/a
Default

On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:

> when you use a scope and amp the signal twice you cut off the freq at
> the top of the wave hence the word clipping and you can watch it on a
> scope it becomes a stright line then drops bac down
> doubt my words try hooking up a eq after a 2 channel high power radio
> has been installed and use all high level wires to hook it up


You're clueless. Don't post again until you learn a little about what
you're talking about.

--
If you're not on the edge, you're taking up too much space.
Linux Registered User #327951

  #33  
Old October 20th 04, 08:07 PM
Dan C
external usenet poster
 
Posts: n/a
Default

On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:

> when you use a scope and amp the signal twice you cut off the freq at
> the top of the wave hence the word clipping and you can watch it on a
> scope it becomes a stright line then drops bac down
> doubt my words try hooking up a eq after a 2 channel high power radio
> has been installed and use all high level wires to hook it up


You're clueless. Don't post again until you learn a little about what
you're talking about.

--
If you're not on the edge, you're taking up too much space.
Linux Registered User #327951

  #34  
Old October 23rd 04, 09:08 PM
mic canic
external usenet poster
 
Posts: n/a
Default

i know exactly what i'm talking about i just can't seem to word it correctly

i can safely say i have forgotten more then u will know

Dan C wrote:

> On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
>
> > when you use a scope and amp the signal twice you cut off the freq at
> > the top of the wave hence the word clipping and you can watch it on a
> > scope it becomes a stright line then drops bac down
> > doubt my words try hooking up a eq after a 2 channel high power radio
> > has been installed and use all high level wires to hook it up

>
> You're clueless. Don't post again until you learn a little about what
> you're talking about.
>
> --
> If you're not on the edge, you're taking up too much space.
> Linux Registered User #327951


  #35  
Old October 23rd 04, 09:08 PM
mic canic
external usenet poster
 
Posts: n/a
Default

i know exactly what i'm talking about i just can't seem to word it correctly

i can safely say i have forgotten more then u will know

Dan C wrote:

> On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
>
> > when you use a scope and amp the signal twice you cut off the freq at
> > the top of the wave hence the word clipping and you can watch it on a
> > scope it becomes a stright line then drops bac down
> > doubt my words try hooking up a eq after a 2 channel high power radio
> > has been installed and use all high level wires to hook it up

>
> You're clueless. Don't post again until you learn a little about what
> you're talking about.
>
> --
> If you're not on the edge, you're taking up too much space.
> Linux Registered User #327951


  #36  
Old October 23rd 04, 09:57 PM
Matt Whiting
external usenet poster
 
Posts: n/a
Default

mic canic wrote:
> i know exactly what i'm talking about i just can't seem to word it correctly
>
> i can safely say i have forgotten more then u will know
>
> Dan C wrote:
>
>
>>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
>>
>>
>>>when you use a scope and amp the signal twice you cut off the freq at
>>>the top of the wave hence the word clipping and you can watch it on a
>>>scope it becomes a stright line then drops bac down
>>>doubt my words try hooking up a eq after a 2 channel high power radio
>>>has been installed and use all high level wires to hook it up

>>
>>You're clueless. Don't post again until you learn a little about what
>>you're talking about.
>>
>>--
>>If you're not on the edge, you're taking up too much space.
>>Linux Registered User #327951

>
>


Trouble is, you've also forgotten as much as you ever knew. You don't
know what you are talking about in this case, no matter how you worded it.


Matt

  #37  
Old October 23rd 04, 09:57 PM
Matt Whiting
external usenet poster
 
Posts: n/a
Default

mic canic wrote:
> i know exactly what i'm talking about i just can't seem to word it correctly
>
> i can safely say i have forgotten more then u will know
>
> Dan C wrote:
>
>
>>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
>>
>>
>>>when you use a scope and amp the signal twice you cut off the freq at
>>>the top of the wave hence the word clipping and you can watch it on a
>>>scope it becomes a stright line then drops bac down
>>>doubt my words try hooking up a eq after a 2 channel high power radio
>>>has been installed and use all high level wires to hook it up

>>
>>You're clueless. Don't post again until you learn a little about what
>>you're talking about.
>>
>>--
>>If you're not on the edge, you're taking up too much space.
>>Linux Registered User #327951

>
>


Trouble is, you've also forgotten as much as you ever knew. You don't
know what you are talking about in this case, no matter how you worded it.


Matt

  #38  
Old October 24th 04, 04:15 PM
mic canic
external usenet poster
 
Posts: n/a
Default

matt i do know what i'm talking about
and would like to know what makes you such a expert in cars? because you own one !
asshole



Matt Whiting wrote:

> mic canic wrote:
> > i know exactly what i'm talking about i just can't seem to word it correctly
> >
> > i can safely say i have forgotten more then u will know
> >
> > Dan C wrote:
> >
> >
> >>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
> >>
> >>
> >>>when you use a scope and amp the signal twice you cut off the freq at
> >>>the top of the wave hence the word clipping and you can watch it on a
> >>>scope it becomes a stright line then drops bac down
> >>>doubt my words try hooking up a eq after a 2 channel high power radio
> >>>has been installed and use all high level wires to hook it up
> >>
> >>You're clueless. Don't post again until you learn a little about what
> >>you're talking about.
> >>
> >>--
> >>If you're not on the edge, you're taking up too much space.
> >>Linux Registered User #327951

> >
> >

>
> Trouble is, you've also forgotten as much as you ever knew. You don't
> know what you are talking about in this case, no matter how you worded it.
>
> Matt


  #39  
Old October 24th 04, 04:15 PM
mic canic
external usenet poster
 
Posts: n/a
Default

matt i do know what i'm talking about
and would like to know what makes you such a expert in cars? because you own one !
asshole



Matt Whiting wrote:

> mic canic wrote:
> > i know exactly what i'm talking about i just can't seem to word it correctly
> >
> > i can safely say i have forgotten more then u will know
> >
> > Dan C wrote:
> >
> >
> >>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
> >>
> >>
> >>>when you use a scope and amp the signal twice you cut off the freq at
> >>>the top of the wave hence the word clipping and you can watch it on a
> >>>scope it becomes a stright line then drops bac down
> >>>doubt my words try hooking up a eq after a 2 channel high power radio
> >>>has been installed and use all high level wires to hook it up
> >>
> >>You're clueless. Don't post again until you learn a little about what
> >>you're talking about.
> >>
> >>--
> >>If you're not on the edge, you're taking up too much space.
> >>Linux Registered User #327951

> >
> >

>
> Trouble is, you've also forgotten as much as you ever knew. You don't
> know what you are talking about in this case, no matter how you worded it.
>
> Matt


  #40  
Old October 25th 04, 12:37 AM
Matt Whiting
external usenet poster
 
Posts: n/a
Default

mic canic wrote:

> matt i do know what i'm talking about
> and would like to know what makes you such a expert in cars? because you own one !
> asshole
>
>
>
> Matt Whiting wrote:
>
>
>>mic canic wrote:
>>
>>>i know exactly what i'm talking about i just can't seem to word it correctly
>>>
>>>i can safely say i have forgotten more then u will know
>>>
>>>Dan C wrote:
>>>
>>>
>>>
>>>>On Wed, 20 Oct 2004 00:39:09 +0000, mic canic wrote:
>>>>
>>>>
>>>>
>>>>>when you use a scope and amp the signal twice you cut off the freq at
>>>>>the top of the wave hence the word clipping and you can watch it on a
>>>>>scope it becomes a stright line then drops bac down
>>>>>doubt my words try hooking up a eq after a 2 channel high power radio
>>>>>has been installed and use all high level wires to hook it up
>>>>
>>>>You're clueless. Don't post again until you learn a little about what
>>>>you're talking about.
>>>>
>>>>--
>>>>If you're not on the edge, you're taking up too much space.
>>>>Linux Registered User #327951
>>>
>>>

>>Trouble is, you've also forgotten as much as you ever knew. You don't
>>know what you are talking about in this case, no matter how you worded it.
>>
>>Matt


Well, for starters, I know enough to post at the bottom. Second, the
topic is more electronics than cars and I'm an EE and PE. What are your
qualifications to talk about electronic amplifiers?

Lastly, I have sufficient vocabulary to enable me to express myself
without the need to resort to vulgarity, which is the bastion of the
ignorant.


Matt

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems! 2000 Caravan Sport and Infinity Sound Snydley Dodge 42 January 3rd 05 08:15 PM


All times are GMT +1. The time now is 11:16 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.