If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Scat Drag Fast shifter troubles
Any of you have experience with this type and brand of shifter? I got one
last weekend to replace my Hurst shifter. After close to an hour of trying to get it to work correctly I gave up and pulled it out. Put the old Hurst shifter back in and it worked right the first time. Any advice would be appreciated, Mike PS I have a brand new Rancho Performance swing axle tranny in the car. |
Ads |
#2
|
|||
|
|||
Scat Drag Fast shifter troubles
"Mike West" > wrote in message ... > Any of you have experience with this type and brand of shifter? I got one > last weekend to replace my Hurst shifter. > After close to an hour of trying to get it to work correctly I gave up and > pulled it out. Put the old Hurst shifter back in and it worked right the > first time. > > Any advice would be appreciated, Mike > > PS I have a brand new Rancho Performance swing axle tranny in the car. > > i have installed a scat dragfast in nearly every vw i ever owned...never had any trouble...just drop it in and tighten the bolts, adjust as you would any shifter and drive.... |
#3
|
|||
|
|||
Scat Drag Fast shifter troubles
I tried that.
Could get 1st and reverse, nothing else, adjust then get 2nd and 3rd and nothing else, adjust a bit more and get nothing. Adjust slightly and get 2nd, adjust a bit more,lose 2nd and get 1st and reverse again, never could get it to go into 4th. I know it isn't rocket science but it sure is agravating! Thanks, Mike "Joey Tribiani" > wrote in message news:_Kw1g.5143$8q.654@dukeread08... > > "Mike West" > wrote in message > ... > > Any of you have experience with this type and brand of shifter? I got one > > last weekend to replace my Hurst shifter. > > After close to an hour of trying to get it to work correctly I gave up and > > pulled it out. Put the old Hurst shifter back in and it worked right the > > first time. > > > > Any advice would be appreciated, Mike > > > > PS I have a brand new Rancho Performance swing axle tranny in the car. > > > > > > i have installed a scat dragfast in nearly every vw i ever owned...never had > any trouble...just drop it in and tighten the bolts, adjust as you would any > shifter and drive.... > > |
#4
|
|||
|
|||
Scat Drag Fast shifter troubles
"Mike West" > wrote in message ... >I tried that. > > Could get 1st and reverse, nothing else, adjust then get 2nd and 3rd and > nothing else, adjust a bit more and get nothing. > Adjust slightly and get 2nd, adjust a bit more,lose 2nd and get 1st and > reverse again, never could get it to go into 4th. > I know it isn't rocket science but it sure is agravating! > > Thanks, Mike > > > > if you can get first and third you are golden...and given the very short throw of the scat, it is very little movement of the shifter...are you sure you aren't getting all gears? since a little movement at the T makes alot of movement at the shift rod, i've never had a problem with a scat dragfast....what condition is your shift coupler and shift rod bushing in>? |
#5
|
|||
|
|||
Scat Drag Fast shifter troubles
Joey,
You hit the nail on the head! I just pulled the Hurst stick out and there isn't a shift bushing at all!!! Know what I'll be doing on Monday. I've changed one out many years ago on another bug and it isn't much fun. Thanks for the help. Mike "Joey Tribiani" > wrote in message news:8wX1g.5313$8q.649@dukeread08... > > "Mike West" > wrote in message > ... > >I tried that. > > > > Could get 1st and reverse, nothing else, adjust then get 2nd and 3rd and > > nothing else, adjust a bit more and get nothing. > > Adjust slightly and get 2nd, adjust a bit more,lose 2nd and get 1st and > > reverse again, never could get it to go into 4th. > > I know it isn't rocket science but it sure is agravating! > > > > Thanks, Mike > > > > > > > > > > > if you can get first and third you are golden...and given the very short > throw of the scat, it is very little movement of the shifter...are you sure > you aren't getting all gears? since a little movement at the T makes alot of > movement at the shift rod, i've never had a problem with a scat > dragfast....what condition is your shift coupler and shift rod bushing in>? > > |
#6
|
|||
|
|||
Scat Drag Fast shifter troubles
"Mike West" > wrote in message ... > Joey, > > You hit the nail on the head! I just pulled the Hurst stick out and there > isn't a shift bushing at all!!! > Know what I'll be doing on Monday. I've changed one out many years ago on > another bug and it isn't much fun. > > Thanks for the help. > when you are done, you can swing by and put the bushing in my Karmann Ghia...i have the bushing but not the time...LOL.... |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AWA [OFFER] G-force transmission / 5 speed with shifter drag racing | [email protected] | General | 0 | January 13th 06 06:58 PM |