If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Haynes manual instructions
Nedavno Bill 2 pise:
| > >This should be included with every Haynes manual sold: | > >http://u225.torque.net/haynes_instructions.html | > | > While they are not the best choice, they are not quite that bad. | | Actually yes they are. They are filled with so much incorrect, | incomplete information that your money is better spent paying a couple | bucks more for the factory service manual. I have 1977 Puch Maxi, and was happy to find Haynes manual for it (from 1973) on amazon.com. Never even heard about Haynes until I joined this group. I am completely disappointed with it as this seems to be a "complete idiots guide" to disassemble and assemble it's engine. OK, not quite, but I hoped for much more details. I ordered directly from haynes.co.uk manual for both my Audi and BMW. Hope they are better than this one from '73 :-) -- ___ ____ /__/ / \ ** Registrovani korisnik Linuksa #291606 ** / / \/ /\ \ ** http://counter.li.org/ ** /__/\____/--\__\ ** Reply at: iimperl - at - ml1 - dot - net ** |
Ads |
#2
|
|||
|
|||
Highly doubtful. In fact, probably worse.
Bite the bullet and get the Factory Service Manual's. Yvan wrote: > I ordered directly from haynes.co.uk manual for both my Audi and BMW. > Hope they are better than this one from '73 :-) > > > |
#3
|
|||
|
|||
Highly doubtful. In fact, probably worse.
Bite the bullet and get the Factory Service Manual's. Yvan wrote: > I ordered directly from haynes.co.uk manual for both my Audi and BMW. > Hope they are better than this one from '73 :-) > > > |
#4
|
|||
|
|||
Nedavno Mike Behnke pise:
| Highly doubtful. In fact, probably worse. | | Bite the bullet and get the Factory Service Manual's. | | > I ordered directly from haynes.co.uk manual for both my Audi and | > BMW. Hope they are better than this one from '73 :-) I probably will. -- ___ ____ /__/ / \ ** Registrovani korisnik Linuksa #291606 ** / / \/ /\ \ ** http://counter.li.org/ ** /__/\____/--\__\ ** Reply at: iimperl - at - ml1 - dot - net ** |
#5
|
|||
|
|||
Nedavno Mike Behnke pise:
| Highly doubtful. In fact, probably worse. | | Bite the bullet and get the Factory Service Manual's. | | > I ordered directly from haynes.co.uk manual for both my Audi and | > BMW. Hope they are better than this one from '73 :-) I probably will. -- ___ ____ /__/ / \ ** Registrovani korisnik Linuksa #291606 ** / / \/ /\ \ ** http://counter.li.org/ ** /__/\____/--\__\ ** Reply at: iimperl - at - ml1 - dot - net ** |
#6
|
|||
|
|||
On Mon, 6 Dec 2004 20:51:47 +0100, Yvan > wrote:
>Nedavno Mike Behnke pise: > >| Highly doubtful. In fact, probably worse. >| >| Bite the bullet and get the Factory Service Manual's. >| >| > I ordered directly from haynes.co.uk manual for both my Audi and >| > BMW. Hope they are better than this one from '73 :-) > >I probably will. I think there is some *online* service, don't remember the name offhand, and they have your service manual *online.* You subscribe on an annual fee basis; something like $25 a year or some such. Can't remember the name, but, that is the way I would go. A -physical- shop manual weights 20 pounds, takes a day to put together into the binders, and is a monstrosity. And unless you're changing out the rod bearings on your pistons or something, it seems to be a *bit* of overkill for most repairs you would make as a hobbyist. Many repairs require specialized tools, and those are going to cost you a fortune, and you may only use them once. Sometimes it makes more sense to bring the dang thing into a qualified service shop. Lg |
#7
|
|||
|
|||
On Mon, 6 Dec 2004 20:51:47 +0100, Yvan > wrote:
>Nedavno Mike Behnke pise: > >| Highly doubtful. In fact, probably worse. >| >| Bite the bullet and get the Factory Service Manual's. >| >| > I ordered directly from haynes.co.uk manual for both my Audi and >| > BMW. Hope they are better than this one from '73 :-) > >I probably will. I think there is some *online* service, don't remember the name offhand, and they have your service manual *online.* You subscribe on an annual fee basis; something like $25 a year or some such. Can't remember the name, but, that is the way I would go. A -physical- shop manual weights 20 pounds, takes a day to put together into the binders, and is a monstrosity. And unless you're changing out the rod bearings on your pistons or something, it seems to be a *bit* of overkill for most repairs you would make as a hobbyist. Many repairs require specialized tools, and those are going to cost you a fortune, and you may only use them once. Sometimes it makes more sense to bring the dang thing into a qualified service shop. Lg |
#8
|
|||
|
|||
On Mon, 6 Dec 2004, Lawrence Glickman wrote:
> I think there is some *online* service, don't remember the name > offhand, and they have your service manual *online.* Alldata. Naw, they don't. They have *THEIR* service manual online. It contains somebody else's digest of information that comes from several sources. Many procedures are reasonably complete, others aren't. > A -physical- shop manual weights 20 pounds, takes a day to put > together into the binders, and is a monstrosity. Horse****. A physical shop manual consists of one or a few volumes, usually totalling about 5 pounds and fitting easily on a bookshelf. How do I know? Well, it might have something to do with the twenty or thirty factory service manuals I own. > And unless you're changing out the rod bearings on your pistons or > something, it seems to be a *bit* of overkill for most repairs you would > make as a hobbyist. If you're trying to replace "rod bearings on your pistons", you've got much bigger problems than what manual to use. > Sometimes it makes more sense to bring the dang thing into a qualified > service shop. Sometimes it makes more sense to know what the hell you're talking about before you post. DS |
#9
|
|||
|
|||
On Mon, 6 Dec 2004, Lawrence Glickman wrote:
> I think there is some *online* service, don't remember the name > offhand, and they have your service manual *online.* Alldata. Naw, they don't. They have *THEIR* service manual online. It contains somebody else's digest of information that comes from several sources. Many procedures are reasonably complete, others aren't. > A -physical- shop manual weights 20 pounds, takes a day to put > together into the binders, and is a monstrosity. Horse****. A physical shop manual consists of one or a few volumes, usually totalling about 5 pounds and fitting easily on a bookshelf. How do I know? Well, it might have something to do with the twenty or thirty factory service manuals I own. > And unless you're changing out the rod bearings on your pistons or > something, it seems to be a *bit* of overkill for most repairs you would > make as a hobbyist. If you're trying to replace "rod bearings on your pistons", you've got much bigger problems than what manual to use. > Sometimes it makes more sense to bring the dang thing into a qualified > service shop. Sometimes it makes more sense to know what the hell you're talking about before you post. DS |
#10
|
|||
|
|||
Nedavno Lawrence Glickman pise:
| >| Highly doubtful. In fact, probably worse. | >| | >| Bite the bullet and get the Factory Service Manual's. | >| | >| > I ordered directly from haynes.co.uk manual for both my Audi and | >| > BMW. Hope they are better than this one from '73 :-) | > | >I probably will. | | I think there is some *online* service, don't remember the name | offhand, and they have your service manual *online.* You subscribe on | an annual fee basis; something like $25 a year or some such. Can't | remember the name, but, that is the way I would go. It's http://www.alldatadiy.com. Is this really a Bentley manual on-line? How come they (Bentley) do not sell it on CD for my car (1989 Audi 100)? | A -physical- shop manual weights 20 pounds, takes a day to put I found factory manual on eBay for $105 and shiping was ~ $50 :-) | Sometimes it makes more sense to bring the dang thing into a qualified | service shop. Every time I go to my mechanic I am more and more convinced that I should do repair by myself, since where I am there is no such thing as "qualified service shop". And Audi service is to expensive for me. -- ___ ____ /__/ / \ ** Registrovani korisnik Linuksa #291606 ** / / \/ /\ \ ** http://counter.li.org/ ** /__/\____/--\__\ ** Reply at: iimperl - at - ml1 - dot - net ** |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
need haynes manual | Tanya | Dodge | 56 | November 23rd 04 04:28 PM |
For Sale: Haynes manual for 89-95 Dodge Spirit and Plymouth Acclaim | Tony H | Dodge | 0 | August 26th 04 02:32 PM |
F.S in UK. Audi 100 & A6 Haynes Manual 1991-1997 Models Petrol & Diesel | joe landy | Audi | 0 | June 14th 04 06:33 PM |