If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
headers and other odd and end questions, 1988 ford bronco 5.0
I have the most gutless truck in the world and am now going about
fixing it. Several questions a I have a set of MAC shorty headers for a mustang. I have heard conflicting stories on if they will fit or not and wonder if anyone here has tried/done it. Converting the speed density computer system to MAF. I have seen many posts on it but would like to talk to someone who has done it on this vehicle in case I have questions. Have a set of E7TE heads ported, polished and fitted with 1.94/1.64 valves and a .050 Duration Int/Exh – 220/220 SAE Duration Int/Exh – 273/273 Gross Valve Lift Int/Exh – 498/498 - Lobe C/L – 110 cam which should wake the whole thing up. Any concerns with this cam or setup if using a MAF computer? Bottom end is fresh or I would go the 351 route. Let me know your thoughts and concerns. Thanks Brett |
Ads |
Thread Tools | |
Display Modes | |
|
|