A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Jeep
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

help



 
 
Thread Tools Display Modes
  #1  
Old September 15th 06, 10:24 AM posted to rec.autos.makers.jeep+willys
fred25401
external usenet poster
 
Posts: 1
Default help

i need help i have a 1990 jeep comanche pioneer oil keeps coming out of the
oil cap whene it's on it do's it whene i rev it up the engine has been rebilt
it has a 2.5 in it...

--
Fred elliott

Ads
  #2  
Old September 15th 06, 12:36 PM posted to rec.autos.makers.jeep+willys
hdd
external usenet poster
 
Posts: 7
Default help

Your pcv valve/crankcase ventilation system is not working, or the rebuild
was no good and the rings are leaking and causing a too much blow by.

"fred25401" <u26664@uwe> wrote in message news:66522fdbe084e@uwe...
> i need help i have a 1990 jeep comanche pioneer oil keeps coming out of

the
> oil cap whene it's on it do's it whene i rev it up the engine has been

rebilt
> it has a 2.5 in it...
>
> --
> Fred elliott
>



  #3  
Old September 15th 06, 02:35 PM posted to rec.autos.makers.jeep+willys
Mike Romain
external usenet poster
 
Posts: 3,758
Default help

That can be an issue with a plugged up CCV or PCV system that Jeep
engines are notorious for. I know several people that got sucked into
new engines because the air filter was filling up with oil due to this.

I am not 100% up on the 4 banger's system, but basically there is an
intake from the air filter into the valve cover and a thin plastic
suction line from the valve cover to the intake manifold. The suction
line or the grommet it plugs into in the valve cover just gets plugged
if it's a CCV system and it will blow oil.

I use carb cleaner and a wire to ream out the plastic CCV tubes. The
grommet's metered hole can be cleaned with a paper clip.

If it's a PCV system, (unlikely) the valve should rattle freely.

Here is an article specific to the 4.0 engine, but I believe your system
is the same:
http://jeep.off-road.com/jeep/articl....jsp?id=257985

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

fred25401 wrote:
>
> i need help i have a 1990 jeep comanche pioneer oil keeps coming out of the
> oil cap whene it's on it do's it whene i rev it up the engine has been rebilt
> it has a 2.5 in it...
>
> --
> Fred elliott

  #4  
Old September 16th 06, 08:26 AM posted to rec.autos.makers.jeep+willys
fred25401 via CarKB.com
external usenet poster
 
Posts: 6
Default help

hdd wrote:
>Your pcv valve/crankcase ventilation system is not working, or the rebuild
>was no good and the rings are leaking and causing a too much blow by.
>
>> i need help i have a 1990 jeep comanche pioneer oil keeps coming out of the
>> oil cap whene it's on it do's it whene i rev it up the engine has been rebilt
>> it has a 2.5 in it...


ok thank you

--
Fred elliott

Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200609/1

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:08 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.