If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wax or what???
I just got back from visiting my brother who has a Lotus 7 Kit car with a
fiberglass body. Instead of car wax, he suggested I try a product originally designed, I think, for fiberglass boats and fiberglass above ground pools - called aerospace 303. He said it cut through normal road grime easily, restored the deep burgundy red color in his car's body, and dust seemed to blow off after use. Does anyone else here use it or something similar? It seems to make sense that something designed for fiberglass might be better than "normal" autobody products, but am unsure. Any thoughts on whether it could hurt my sebring silver finish?? Thanks in advance. |
Ads |
#2
|
|||
|
|||
> wrote in message
news ---snip--- cut the html when on usenet. |
#3
|
|||
|
|||
Your last 2 sentences say it all. First off you're not treating fiberglass.
You are treating the finish, paint. I've not used the product your talking about but if it worked on his kit car "paint" it will most probably work on other painted surfaces. Try a spot that would not be objectionable if it was a total disaster and let us know how it works out. Don't think there should be a problem from what you indicate. -- Dad 05 C6 Silver/Red 6spd Z51 72 Shark Black/Black/4spd > wrote in message news I just got back from visiting my brother who has a Lotus 7 Kit car with a fiberglass body. Instead of car wax, he suggested I try a product originally designed, I think, for fiberglass boats and fiberglass above ground pools - called aerospace 303. He said it cut through normal road grime easily, restored the deep burgundy red color in his car's body, and dust seemed to blow off after use. Does anyone else here use it or something similar? It seems to make sense that something designed for fiberglass might be better than "normal" autobody products, but am unsure. Any thoughts on whether it could hurt my sebring silver finish?? Thanks in advance. |
#4
|
|||
|
|||
Here is what the majority of classic car folks are using :
www.zainobros.com . I havent found anything thats more durable as well as shiny. |
#5
|
|||
|
|||
If 303 Aerospace Protectant is what you are reffering to, it is for vinyls, plastics and fiberglass gelcoats, not paint.
http://www.303products.com/tech/inde...oduct_ID=32 3 > wrote in message news I just got back from visiting my brother who has a Lotus 7 Kit car with a fiberglass body. Instead of car wax, he suggested I try a product originally designed, I think, for fiberglass boats and fiberglass above ground pools - called aerospace 303. He said it cut through normal road grime easily, restored the deep burgundy red color in his car's body, and dust seemed to blow off after use. Does anyone else here use it or something similar? It seems to make sense that something designed for fiberglass might be better than "normal" autobody products, but am unsure. Any thoughts on whether it could hurt my sebring silver finish?? Thanks in advance. |
#6
|
|||
|
|||
A testamonial from the 303 Products site. -- --
303 Aerospace Protectant Long Lasting Shine on Truck Hood "I am writing to you about the use of 303 Protectant which I started to use 2 years ago when my boat dealer told me about it. The reason for this letter is to let you know that I experimented with it on the hood of my 1984 Dodge truck. You may already know it can be safely used on painted surfaces. Two years ago I put a coat on the top of the front fender which is also part of the hood. Next to this I waxed with a well known liquid wax. In the past two years I have done nothing else to these areas but to observe that the wax was long gone when the 303 area still showed a difference from the rest of the hood! This morning I washed the truck and decided to write to you as after two years of out in the weather, the treated area still shows some shine. D. Doane "Marty" > wrote in message ... If 303 Aerospace Protectant is what you are reffering to, it is for vinyls, plastics and fiberglass gelcoats, not paint. http://www.303products.com/tech/inde...oduct_ID=32 3 > wrote in message news I just got back from visiting my brother who has a Lotus 7 Kit car with a fiberglass body. Instead of car wax, he suggested I try a product originally designed, I think, for fiberglass boats and fiberglass above ground pools - called aerospace 303. He said it cut through normal road grime easily, restored the deep burgundy red color in his car's body, and dust seemed to blow off after use. Does anyone else here use it or something similar? It seems to make sense that something designed for fiberglass might be better than "normal" autobody products, but am unsure. Any thoughts on whether it could hurt my sebring silver finish?? Thanks in advance. |
#7
|
|||
|
|||
"Marty" > wrote in message
... If 303 Aerospace Protectant is what you are reffering to, it is for vinyls, plastics and fiberglass gelcoats, not paint. http://www.303products.com/tech/inde...oduct_ID=32 3 ========== Marty, cut the html. this is a plain text group. just a heads up... -- "Key" |
#8
|
|||
|
|||
Sorry,
Thought I had it set to plain text. I think I got it to plain text now, gotta love OE. Marty "'Key" > wrote in message .. . > "Marty" > wrote in message > ... > If 303 Aerospace Protectant is what you are reffering to, it is for > vinyls, plastics and fiberglass gelcoats, not paint. > > http://www.303products.com/tech/inde...oduct_ID=32 3 > > > ========== > Marty, cut the html. > this is a plain text group. > > just a heads up... > -- > "Key" > |
#9
|
|||
|
|||
There you have it!
I just knew Dodge was using vinyl shelf paper instead of paint! ;-)) Seriously tho, it sounds like good stuff. Marty "Dad" > wrote in message ... >A testamonial from the 303 Products site. -- -- > > 303 Aerospace Protectant Long Lasting Shine on Truck Hood > "I am writing to you about the use of 303 Protectant which I started to > use 2 years ago when my boat dealer told me about it. The reason for this > letter is to let you know that I experimented with it on the hood of my > 1984 Dodge truck. You may already know it can be safely used on painted > surfaces. > Two years ago I put a coat on the top of the front fender which is also > part of the hood. Next to this I waxed with a well known liquid wax. In > the past two years I have done nothing else to these areas but to observe > that the wax was long gone when the 303 area still showed a difference > from the rest of the hood! This morning I washed the truck and decided to > write to you as after two years of out in the weather, the treated area > still shows some shine. > D. Doane > |
#10
|
|||
|
|||
"Marty" > wrote in message
... > Sorry, > Thought I had it set to plain text. no need to apoligise. it was just a "heads up" > I think I got it to plain text now, gotta love OE. > > Marty yea ya do. g'day to ya Marty -- "Key" > "'Key" > wrote in message > .. . >> "Marty" > wrote in message >> ... >> If 303 Aerospace Protectant is what you are reffering to, >> it is for vinyls, plastics and fiberglass gelcoats, not >> paint. >> >> http://www.303products.com/tech/inde...oduct_ID=32 3 >> >> >> ========== >> Marty, cut the html. >> this is a plain text group. >> >> just a heads up... >> -- >> "Key" >> > > |
Thread Tools | |
Display Modes | |
|
|