A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Alfa Romeo
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

UK 147 Fuse placement



 
 
Thread Tools Display Modes
  #1  
Old June 21st 04, 07:59 AM
Ash
external usenet poster
 
Posts: n/a
Default UK 147 Fuse placement

Hi,

I've just looked at the fuses under the dash and they according to the
handbook, they all seem out of place....(wrong fuse ratings in each socket).
Is this anything to do with a UK car and a non-UK handbook ?

I also found that the two fastening screws are to small....they go straight
threw the holes their supposed to screw into. The screws look fine, not worn
at all. Any ideas ?

TIA
Ash


Ads
  #2  
Old June 21st 04, 09:04 AM
Colonel Tupperware
external usenet poster
 
Posts: n/a
Default

On Mon, 21 Jun 2004 07:59:26 +0100, "Ash" > wrote:

>I also found that the two fastening screws are to small....they go straight
>threw the holes their supposed to screw into.


D- Must try harder.

I also found that the two fastening screws are too small....they go
straight through the holes they're supposed to screw into.


--
ColonelTupperware
spouting ******** on Usenet since 1997
Usenet FAQ at http://www.its.caltech.edu/its/servi...ws/news2.shtml
UPCE FAQ at http://upce.org.uk/
UKRM FAQ at http://www.ukrm.net/faq/
  #3  
Old June 30th 04, 04:21 PM
external usenet poster
 
Posts: n/a
Default

"Ash" > wrote in message >...
> Hi,
>
> I've just looked at the fuses under the dash and they according to the
> handbook, they all seem out of place....(wrong fuse ratings in each socket).
> Is this anything to do with a UK car and a non-UK handbook ?
>
> I also found that the two fastening screws are to small....they go straight
> threw the holes their supposed to screw into. The screws look fine, not worn
> at all. Any ideas ?
>
> TIA
> Ash


Hi Ash,
I had trouble with the srews too, after the Alfa dealer had been
working on it. The fixing was a two piece part [I FOUND IT UNDER THE
SEAT AFTER WORK WAS DONE]and aukward to fit together, so I fitted a
different clip and screw [u shape clip] and now it is fine.
How have you got a non UK handbook? Mine was an import and had a UK
handbook.
There are one or two fuse boxes, [Not trying to be rude] are you sure
you are looking at the right one. John, UK.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.