If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
does anyone know this?
I want to install a new air filter housing on my 258, carter carb. Does
anyone know the receiver size? that worded right... in other words, I ditched the emissions crap and want a new air filter housing and im not sure what "size" I need. hope that makes sense |
Ads |
#2
|
|||
|
|||
I guess you live someplace warm eh? Man I hate it when my carb turns
into a block of ice so I kept the stock filter housing with the hot air intake tube. I think the aftermarket housings come by vehicle type so you just get one that says it's fits a CJ/YJ or use a tape measure on the opening....... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Pi-eyed Piper wrote: > > I want to install a new air filter housing on my 258, carter carb. Does > anyone know the receiver size? that worded right... > > in other words, I ditched the emissions crap and want a new air filter > housing and im not sure what "size" I need. > > hope that makes sense |
#3
|
|||
|
|||
maybe im making a mistake.....im in Alberta. I should probably keep the
original one...or keep it for winter. I just liked the idea of seeing the vavle cover.. "Mike Romain" > wrote in message ... > I guess you live someplace warm eh? Man I hate it when my carb turns > into a block of ice so I kept the stock filter housing with the hot air > intake tube. > > I think the aftermarket housings come by vehicle type so you just get > one that says it's fits a CJ/YJ or use a tape measure on the > opening....... > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > > Pi-eyed Piper wrote: > > > > I want to install a new air filter housing on my 258, carter carb. Does > > anyone know the receiver size? that worded right... > > > > in other words, I ditched the emissions crap and want a new air filter > > housing and im not sure what "size" I need. > > > > hope that makes sense |
#4
|
|||
|
|||
Canadian Tire sells new air filter housings that will fit on. They sell
a lot of Jeep stuff including carb kits. Alberta is where I saw a whole mess of frozen carbs. One froze into a solid block at 50 mph in a snow storm on the Jasper highway. What a riot that was, the throttle stayed at 50 mph..... We got it stopped and had to pull into a garage bay in Edson or Stoney plain maybe for an hour to thaw the sucker. I do recommend the stock filter and heat tube for the winter..... Mike Pi-eyed Piper wrote: > > maybe im making a mistake.....im in Alberta. I should probably keep the > original one...or keep it for winter. I just liked the idea of seeing the > vavle cover.. > > "Mike Romain" > wrote in message > ... > > I guess you live someplace warm eh? Man I hate it when my carb turns > > into a block of ice so I kept the stock filter housing with the hot air > > intake tube. > > > > I think the aftermarket housings come by vehicle type so you just get > > one that says it's fits a CJ/YJ or use a tape measure on the > > opening....... > > > > Mike > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > 88 Cherokee 235 BFG AT's > > > > Pi-eyed Piper wrote: > > > > > > I want to install a new air filter housing on my 258, carter carb. Does > > > anyone know the receiver size? that worded right... > > > > > > in other words, I ditched the emissions crap and want a new air filter > > > housing and im not sure what "size" I need. > > > > > > hope that makes sense |
#5
|
|||
|
|||
hmm....that heat tube is on the manifold right? which I replaced with a
pacesetter header. any way to rig something up? Have you seen any fixes? "Mike Romain" > wrote in message ... > Canadian Tire sells new air filter housings that will fit on. They sell > a lot of Jeep stuff including carb kits. > > Alberta is where I saw a whole mess of frozen carbs. One froze into a > solid block at 50 mph in a snow storm on the Jasper highway. What a > riot that was, the throttle stayed at 50 mph..... We got it stopped and > had to pull into a garage bay in Edson or Stoney plain maybe for an hour > to thaw the sucker. > > I do recommend the stock filter and heat tube for the winter..... > > Mike > > Pi-eyed Piper wrote: > > > > maybe im making a mistake.....im in Alberta. I should probably keep the > > original one...or keep it for winter. I just liked the idea of seeing the > > vavle cover.. > > > > "Mike Romain" > wrote in message > > ... > > > I guess you live someplace warm eh? Man I hate it when my carb turns > > > into a block of ice so I kept the stock filter housing with the hot air > > > intake tube. > > > > > > I think the aftermarket housings come by vehicle type so you just get > > > one that says it's fits a CJ/YJ or use a tape measure on the > > > opening....... > > > > > > Mike > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > > 88 Cherokee 235 BFG AT's > > > > > > Pi-eyed Piper wrote: > > > > > > > > I want to install a new air filter housing on my 258, carter carb. Does > > > > anyone know the receiver size? that worded right... > > > > > > > > in other words, I ditched the emissions crap and want a new air filter > > > > housing and im not sure what "size" I need. > > > > > > > > hope that makes sense |
#6
|
|||
|
|||
I have seen bailing wire or large plumbing hose clamps used to hook the
original to one of the header pipes. I think you can get heat tube boxes for headers or I guess a bit of sheet metal and some snips.... I would check at the wreckers maybe. They are usually just screwed or riveted on. You have serious cold out there..... Mike Pi-eyed Piper wrote: > > hmm....that heat tube is on the manifold right? which I replaced with a > pacesetter header. any way to rig something up? Have you seen any fixes? > > "Mike Romain" > wrote in message > ... > > Canadian Tire sells new air filter housings that will fit on. They sell > > a lot of Jeep stuff including carb kits. > > > > Alberta is where I saw a whole mess of frozen carbs. One froze into a > > solid block at 50 mph in a snow storm on the Jasper highway. What a > > riot that was, the throttle stayed at 50 mph..... We got it stopped and > > had to pull into a garage bay in Edson or Stoney plain maybe for an hour > > to thaw the sucker. > > > > I do recommend the stock filter and heat tube for the winter..... > > > > Mike > > > > Pi-eyed Piper wrote: > > > > > > maybe im making a mistake.....im in Alberta. I should probably keep the > > > original one...or keep it for winter. I just liked the idea of seeing > the > > > vavle cover.. > > > > > > "Mike Romain" > wrote in message > > > ... > > > > I guess you live someplace warm eh? Man I hate it when my carb turns > > > > into a block of ice so I kept the stock filter housing with the hot > air > > > > intake tube. > > > > > > > > I think the aftermarket housings come by vehicle type so you just get > > > > one that says it's fits a CJ/YJ or use a tape measure on the > > > > opening....... > > > > > > > > Mike > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > > > 88 Cherokee 235 BFG AT's > > > > > > > > Pi-eyed Piper wrote: > > > > > > > > > > I want to install a new air filter housing on my 258, carter carb. > Does > > > > > anyone know the receiver size? that worded right... > > > > > > > > > > in other words, I ditched the emissions crap and want a new air > filter > > > > > housing and im not sure what "size" I need. > > > > > > > > > > hope that makes sense |
#7
|
|||
|
|||
hehheh...yes we do, dont dare **** outside or it'll freeze up before you're
done. I never took a close look at the other one, I'll probably be able to rig it up. "Mike Romain" > wrote in message ... > I have seen bailing wire or large plumbing hose clamps used to hook the > original to one of the header pipes. > > I think you can get heat tube boxes for headers or I guess a bit of > sheet metal and some snips.... I would check at the wreckers maybe. > They are usually just screwed or riveted on. > > You have serious cold out there..... > > Mike > > Pi-eyed Piper wrote: > > > > hmm....that heat tube is on the manifold right? which I replaced with a > > pacesetter header. any way to rig something up? Have you seen any fixes? > > > > "Mike Romain" > wrote in message > > ... > > > Canadian Tire sells new air filter housings that will fit on. They sell > > > a lot of Jeep stuff including carb kits. > > > > > > Alberta is where I saw a whole mess of frozen carbs. One froze into a > > > solid block at 50 mph in a snow storm on the Jasper highway. What a > > > riot that was, the throttle stayed at 50 mph..... We got it stopped and > > > had to pull into a garage bay in Edson or Stoney plain maybe for an hour > > > to thaw the sucker. > > > > > > I do recommend the stock filter and heat tube for the winter..... > > > > > > Mike > > > > > > Pi-eyed Piper wrote: > > > > > > > > maybe im making a mistake.....im in Alberta. I should probably keep the > > > > original one...or keep it for winter. I just liked the idea of seeing > > the > > > > vavle cover.. > > > > > > > > "Mike Romain" > wrote in message > > > > ... > > > > > I guess you live someplace warm eh? Man I hate it when my carb turns > > > > > into a block of ice so I kept the stock filter housing with the hot > > air > > > > > intake tube. > > > > > > > > > > I think the aftermarket housings come by vehicle type so you just get > > > > > one that says it's fits a CJ/YJ or use a tape measure on the > > > > > opening....... > > > > > > > > > > Mike > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > > > > 88 Cherokee 235 BFG AT's > > > > > > > > > > Pi-eyed Piper wrote: > > > > > > > > > > > > I want to install a new air filter housing on my 258, carter carb. > > Does > > > > > > anyone know the receiver size? that worded right... > > > > > > > > > > > > in other words, I ditched the emissions crap and want a new air > > filter > > > > > > housing and im not sure what "size" I need. > > > > > > > > > > > > hope that makes sense |
#8
|
|||
|
|||
Then at least use the housing of your stock air filer:
http://www.billhughes.com/weber.jpg Remember any aftermarket will only fit straight up from the carburetor, (except the one made by the snake oil manufacturer and only traps giant grasshoppers) and you need at least one with fifteen inches diameter to get a enough filtration area, which usually means doing away with the hood: http://www.billhughes.com/bluejeep.jpg :-) God Bless America, ßill O|||||||O Pi-eyed Piper wrote: > > hehheh...yes we do, dont dare **** outside or it'll freeze up before you're > done. > > I never took a close look at the other one, I'll probably be able to rig it > up. |
#9
|
|||
|
|||
So Bill, what you're saying is I can forget about having a pretty chrome air
filter???? "L.W. (ßill) Hughes III" > wrote in message ... > Then at least use the housing of your stock air filer: > http://www.billhughes.com/weber.jpg Remember any aftermarket will only > fit straight up from the carburetor, (except the one made by the snake > oil manufacturer and only traps giant grasshoppers) and you need at > least one with fifteen inches diameter to get a enough filtration area, > which usually means doing away with the hood: > http://www.billhughes.com/bluejeep.jpg :-) > God Bless America, ßill O|||||||O > > > Pi-eyed Piper wrote: > > > > hehheh...yes we do, dont dare **** outside or it'll freeze up before you're > > done. > > > > I never took a close look at the other one, I'll probably be able to rig it > > up. |
Thread Tools | |
Display Modes | |
|
|