A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto newsgroups » Technology
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

'89 Corolla strange A/C problem (heat mixing with AC)



 
 
Thread Tools Display Modes
  #1  
Old July 25th 05, 04:32 AM
external usenet poster
 
Posts: n/a
Default '89 Corolla strange A/C problem (heat mixing with AC)

Hi,
I have a mechanically excellent '89 Corolla whose AC has worked great
until these past 2 years. I believe the heat's mixing with the AC and
would appreciate your advice on how to fix it. The AC does function
and I don't think the issue's low freon.

Let's call the car's dash-level air vents #1 thru #4 to represents the
driver's side vent, 2 center vents, and passenger side vent. When I
turn on the AC, I get pretty cold air from #3 but slightly cold air
from the other vents. When the heat is off (I slide the temp dial all
the way to the left), I appear to be getting slightly heated air out of
vents #1,#2,#4.

I don't have a good understanding of where/how the heat and AC
ventilation systems interface and why I'm getting colder air out of one
vent than the other. How should I go about disassembling the
ventilation system (do I do it from the firewall or via taking apart
the dashboard? I assume #2) and what should I be looking for? I
assume that I should also take out the radio and the ventilation
controls and look around at how the ventilation controls are hooked up.
My mechanic's never been keen on taking apart the car's dashboard so
I'll need to do it myself.

Thanks for your advice,
John

Ads
  #2  
Old July 25th 05, 05:01 AM
Ray O
external usenet poster
 
Posts: n/a
Default


> wrote in message
ps.com...
> Hi,
> I have a mechanically excellent '89 Corolla whose AC has worked great
> until these past 2 years. I believe the heat's mixing with the AC and
> would appreciate your advice on how to fix it. The AC does function
> and I don't think the issue's low freon.
>
> Let's call the car's dash-level air vents #1 thru #4 to represents the
> driver's side vent, 2 center vents, and passenger side vent. When I
> turn on the AC, I get pretty cold air from #3 but slightly cold air
> from the other vents. When the heat is off (I slide the temp dial all
> the way to the left), I appear to be getting slightly heated air out of
> vents #1,#2,#4.
>
> I don't have a good understanding of where/how the heat and AC
> ventilation systems interface and why I'm getting colder air out of one
> vent than the other. How should I go about disassembling the
> ventilation system (do I do it from the firewall or via taking apart
> the dashboard? I assume #2) and what should I be looking for? I
> assume that I should also take out the radio and the ventilation
> controls and look around at how the ventilation controls are hooked up.
> My mechanic's never been keen on taking apart the car's dashboard so
> I'll need to do it myself.
>
> Thanks for your advice,
> John
>


There are 2 basic parts of the heating system - the temperature control, and
damper control.

The good news is that you can check the function of the heater control valve
fairly easily. In the engine compartment, somewhere on the firewall
(barrier between the engine and passenger compartments), usually somewhere
between the center and passenger side of the firewall, is the heater control
valve. It is located in the heater hose, which is a black rubber hose a
little thicker in diameter than a garden hose, coming from the engine and
passing through the firewall somewhere on the passenger side of the
firewall. The heater hose will have the valve in line and have a short
lever attached to a wire cable. If someone sits in the car and moves the
temp control from cold to hot, you should see the wire moving the lever
through its full range of motion. If you see nothing moving or it doesn't
move through its full range of motion, the wire may be broken or kinked
somewhere or the lever is binding. The wire passes through the firewall and
is attached to the temp control lever or knob.

Where the air is directed, i.e, dash, floor, or windshield, has no bearing
on temperature. If the air comes out of the appropriate vents when moving
the control, then it is OK.

You can check refrigerant levels fairly easily. Turn on the AC, move the
temp to cold, set the parking brake, and open the hood. In front of the
radiator will be a cylindrical canister called a receiver drier. The
receiver drier should have a small round glass window on top called a sight
glass. With the AC running, if you see foam in the glass, then the
refrigerant (called "freon" in the old days but not called refrigerant
134-A) is low and needs to be recharged. Based on the age of your car, that
is the most likely cause of the warm air.
--
Ray O
correct the return address punctuation to reply


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Audi A4 Avant 1.9 TDI: Strange CAN-bus problem Hein Audi 1 June 11th 05 06:21 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 May 24th 05 05:27 AM
rec.autos.makers.chrysler FAQ, Part 1/6 Dr. David Zatz Chrysler 5 May 8th 05 05:29 AM
New *FREE* Corvette Discussion Forum JLA ENTERPRISES TECHNOLOGIES INTEGRATION Corvette 12 November 30th 04 07:36 PM
alfa 147 jtd - strange problem Simon C Alfa Romeo 0 August 24th 04 08:11 AM


All times are GMT +1. The time now is 12:21 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.