351w into a CJ7

Hi all,

I know the 302w swap into a CJ has been done quite a bit and was wondering
if the 351w will go in just as well. I know the motor mounts are the same
on both blocks, my biggest concern is header clearance.

Has anyone done this swap?

Thanks for any info!

Mike D.
85 CJ7

I've alway thought of the Windsor heads as the small ones that
originally came on the 260" and the Cleveland or Modified as the bigger
heads used on the same small block taking it out to 400". Sure you'll
have plenty of room. It'll bolt straight in with a little help form:
http://www.advanceadapters.com/catalog/003.html
God Bless America, ßill O|||||||O
http://www.billhughes.com/

"Mike Duane Jr." wrote:
>
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7

A good start
http://www.novak-adapt.com/knowledge...es_general.htm
--
Coasty
Semper Paratus
(Always Ready)

"Mike Duane Jr." > wrote in message
...
> Hi all,
>
> I know the 302w swap into a CJ has been done quite a bit and was wondering
> if the 351w will go in just as well. I know the motor mounts are the same
> on both blocks, my biggest concern is header clearance.
>
> Has anyone done this swap?
>
> Thanks for any info!
>
> Mike D.
> 85 CJ7