If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CJ8 parts availability
I am going to look at a CJ8 tomorrow morning, but I was wondering in the
availability of parts for these, since they weren't produced in nearly the numbers that the CJ7's were. I am mainly concerned with finding body parts that are unique to the CJ8 in case there is a need for them. This particular Jeep is in Wisconsin, but hasn't spent all its life there. Obviously I am going to check out the frame and tub for rot, and the general mechanical soundness. Is there anything else I should specifically look for? Thanks guys and gals. Chris |
Ads |
#2
|
|||
|
|||
CJ8 parts availability
Well, I went and looked at this Jeep yesterday, and like is very common, the
vehicle was in much worse shape than advertised. The bed area is rotted in several places and the frame has seen better days. Thing ran like a watch, but unfortunately the foundation is not in good shape. Chris "c" > wrote in message ... >I am going to look at a CJ8 tomorrow morning, but I was wondering in the >availability of parts for these, since they weren't produced in nearly the >numbers that the CJ7's were. I am mainly concerned with finding body parts >that are unique to the CJ8 in case there is a need for them. > > This particular Jeep is in Wisconsin, but hasn't spent all its life there. > Obviously I am going to check out the frame and tub for rot, and the > general mechanical soundness. Is there anything else I should specifically > look for? > > Thanks guys and gals. > Chris > |
#3
|
|||
|
|||
CJ8 parts availability
There are quite a few places which sell body tubs and body kits for CJ8's.
You ought to check into how much they'll cost and then go back and beat the guy up for a good price for his rig since it's rotted. "c" > wrote in message ... > Well, I went and looked at this Jeep yesterday, and like is very common, the > vehicle was in much worse shape than advertised. The bed area is rotted in > several places and the frame has seen better days. Thing ran like a watch, > but unfortunately the foundation is not in good shape. > > Chris > > "c" > wrote in message > ... > >I am going to look at a CJ8 tomorrow morning, but I was wondering in the > >availability of parts for these, since they weren't produced in nearly the > >numbers that the CJ7's were. I am mainly concerned with finding body parts > >that are unique to the CJ8 in case there is a need for them. > > > > This particular Jeep is in Wisconsin, but hasn't spent all its life there. > > Obviously I am going to check out the frame and tub for rot, and the > > general mechanical soundness. Is there anything else I should specifically > > look for? > > > > Thanks guys and gals. > > Chris > > > > |
#4
|
|||
|
|||
CJ8 parts availability
Thanks, I did find a few sources since I posted this too, including one that
is fiberglass, so that is a consideration too, especially since they use so much salt here in the winter. "Nat Man" > wrote in message news > There are quite a few places which sell body tubs and body kits for CJ8's. > You ought to check into how much they'll cost and then go back and beat > the > guy up for a good price for his rig since it's rotted. > > > "c" > wrote in message > ... >> Well, I went and looked at this Jeep yesterday, and like is very common, > the >> vehicle was in much worse shape than advertised. The bed area is rotted >> in >> several places and the frame has seen better days. Thing ran like a >> watch, >> but unfortunately the foundation is not in good shape. >> >> Chris >> >> "c" > wrote in message >> ... >> >I am going to look at a CJ8 tomorrow morning, but I was wondering in the >> >availability of parts for these, since they weren't produced in nearly > the >> >numbers that the CJ7's were. I am mainly concerned with finding body > parts >> >that are unique to the CJ8 in case there is a need for them. >> > >> > This particular Jeep is in Wisconsin, but hasn't spent all its life > there. >> > Obviously I am going to check out the frame and tub for rot, and the >> > general mechanical soundness. Is there anything else I should > specifically >> > look for? >> > >> > Thanks guys and gals. >> > Chris >> > >> >> > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AWA [DEMAND] Inquiring BMW Genuine Parts | [email protected] | General | 0 | May 4th 06 11:52 AM |
AWA [DEMAND] Inquiring Mercedes-benz Genuine Parts | [email protected] | General | 0 | May 4th 06 11:51 AM |
FA: 1990 miata parts + much more to come - long list, many OEM &aftermarket parts for 1.6 and 1.8 liter M1's | pws | Mazda | 6 | August 2nd 05 02:53 AM |
1953 - 1975 CHEVROLET CORVETTE CHASSIS and BODY PARTS CATALOG | Tom Hall | Antique cars | 0 | January 27th 04 11:22 PM |