Programming Sequence For Autostart AS-1200 Remote Starter Key Fob

Hi
I have a 97 Neon that came with an Autostart AS-1200 Remote starter.
The remote is not working and I have been unable to find the
programming sequence to set up another remote for it. I bought the car
used and have been able to find the manual for the starter online but
no info for programming the remote. Any information would be greatly
appreciated.

Thanks

Wayne

To program a new transmitter:
1. Raise the hood
2. Turn valet switch “off”.
3. Turn ignition “on”.
4. Turn valet switch “ON”. Parking lights
SHOULD turn on for 5 seconds.
5. Press channel 1 on transmitter within 5
seconds of step 4. (lights will flash 5 times
fast, and 2 times slow)
6. Turn ignition off and close the hood.

enjoy it

vince

To program a new transmitter:
1. Raise the hood
2. Turn valet switch “off”.
3. Turn ignition “on”.
4. Turn valet switch “ON”. Parking lights
SHOULD turn on for 5 seconds.
5. Press channel 1 on transmitter within 5
seconds of step 4. (lights will flash 5 times
fast, and 2 times slow)
6. Turn ignition off and close the hood.

enjoy it

vince