A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Ford Explorer
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

97 V6 SOHC Will Intermittantly Not Start - loses clock/radio memory settings???



 
 
Thread Tools Display Modes
  #1  
Old January 20th 05, 03:11 AM
Jeff
external usenet poster
 
Posts: n/a
Default 97 V6 SOHC Will Intermittantly Not Start - loses clock/radio memory settings???

At times, my '97 explorer will just spin over and over. I found that if I
wiggle the crankshaft speed sensor on the front of the motor, my car will
start right up. This sensor only has 1.5 v running to it, so a little
corrosion will cause a problem

Good luck!!!
Jeff

"Jim Boone" > wrote in message
.. .
> Hi,
>
> I have a recurring problem with my 97 EB Explorer that is about to make me
> sell it. It starts fine, then without warning, it will not start. The
> engine cranks for a bit, then the starter motor cuts off and I loose all
> my
> radio presets and clock settings. In the past, I would crank it again,
> and
> it would start. Now, unfortunately, it will no longer start at all and
> continues to crank without starting.
>
> I took the truck on a trip to the mountains recently and was stranded
> because it would not start. I had it towed to the nearest town to a Ford
> dealer and they simply replaced the fuel pump inertia switch and said that
> "fixed" the problem. It did for a while, but I was skeptical because I
> had
> jumpered that switch when I tried to get the truck to start in the
> mountains. Sadly, the problem is back. It is sitting in my driveway and
> will not start. Has anyone had this problem? Does anyone have any ideas
> what
> is going on? Any help would be appreciated. Thanks in advance!
>
> Jim
>
>



Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.