If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Clanking noise from front wheels?
91 Accord LX.
I don't know that it's the engine, I suspect it's the wheels. It is audible at lower speeds (under 10 mph). The best way I can describe it is a clanking noise as opposed to a grinding noise. As far as I can tell, the car is driving fine - I get on the highway to to to work everyday. Anti-Freeze filled, oil change done, tires changed and balanced.... I put the question mark because I'm not even sure that the wheels are actually the problem. |
Ads |
#2
|
|||
|
|||
Some ideas:
Maybe start by putting the front of the car on jackstands and grasping each front wheel at first the 12 o'clock and 6 o'clock positions; then the 3 o'clock and 9 o'clock positions and pushing/pulling so as to seek play in the wheel. There's supposed to be practically none. If someone puts their head under the car and looks at the suspension system ball joints at the same time, he/she might also see some movement that's not supposed to be there Possibly a bad wheel bearing might be behind this. Does the noise sound different on turns? Possibly a steering system tie rod come loose or bent. Hit anything that might have got into the undercarriage lately? Or that might have bent a wheel rim? "Google Beta User" > wrote > 91 Accord LX. > > I don't know that it's the engine, I suspect it's the wheels. It is > audible at lower speeds (under 10 mph). The best way I can describe it > is a clanking noise as opposed to a grinding noise. > > As far as I can tell, the car is driving fine - I get on the highway to > to to work everyday. Anti-Freeze filled, oil change done, tires changed > and balanced.... > > I put the question mark because I'm not even sure that the wheels are > actually the problem. |
#3
|
|||
|
|||
Some ideas:
Maybe start by putting the front of the car on jackstands and grasping each front wheel at first the 12 o'clock and 6 o'clock positions; then the 3 o'clock and 9 o'clock positions and pushing/pulling so as to seek play in the wheel. There's supposed to be practically none. If someone puts their head under the car and looks at the suspension system ball joints at the same time, he/she might also see some movement that's not supposed to be there Possibly a bad wheel bearing might be behind this. Does the noise sound different on turns? Possibly a steering system tie rod come loose or bent. Hit anything that might have got into the undercarriage lately? Or that might have bent a wheel rim? "Google Beta User" > wrote > 91 Accord LX. > > I don't know that it's the engine, I suspect it's the wheels. It is > audible at lower speeds (under 10 mph). The best way I can describe it > is a clanking noise as opposed to a grinding noise. > > As far as I can tell, the car is driving fine - I get on the highway to > to to work everyday. Anti-Freeze filled, oil change done, tires changed > and balanced.... > > I put the question mark because I'm not even sure that the wheels are > actually the problem. |
#4
|
|||
|
|||
Google Beta User wrote:
> 91 Accord LX. > > I don't know that it's the engine, I suspect it's the wheels. It is > audible at lower speeds (under 10 mph). The best way I can describe it > is a clanking noise as opposed to a grinding noise. > > As far as I can tell, the car is driving fine - I get on the highway to > to to work everyday. Anti-Freeze filled, oil change done, tires changed > and balanced.... > > I put the question mark because I'm not even sure that the wheels are > actually the problem. > ----------------------- Retorque the lug nuts with the wrench that came with the car. Best to do it before going anywhere :-) 'Curly' |
#5
|
|||
|
|||
Google Beta User wrote:
> 91 Accord LX. > > I don't know that it's the engine, I suspect it's the wheels. It is > audible at lower speeds (under 10 mph). The best way I can describe it > is a clanking noise as opposed to a grinding noise. > > As far as I can tell, the car is driving fine - I get on the highway to > to to work everyday. Anti-Freeze filled, oil change done, tires changed > and balanced.... > > I put the question mark because I'm not even sure that the wheels are > actually the problem. > ----------------------- Retorque the lug nuts with the wrench that came with the car. Best to do it before going anywhere :-) 'Curly' |
#6
|
|||
|
|||
GBU:
Agree with Curly:First thing to do- Check torque on lugnuts, especially if rims are alloy. First action to take when you notice any noises when moving. Alloy rims are notorious for lugnuts loosening, especially after having been recently removed and retightened. Symptoms of loose lugnuts may be similar to bad wheel bearing noise: whines at highway speeds, gets worse when negotiating a curve in one direction and quiets down when curving in the other direction. Hard to localize wheel bearing noise; I just paid a dealer to change the wrong one, and then had to pay again to have them change the bad one. To test for bad axles: look for split-open drive boots. If the boot has split open, grease has been flung out and grit and water have gotten in. Also, find a wide open space like a parking lot, turn the wheel sharply to one side(without holding it tightly agains the stop on the steering wheel), and (safely!)perform tight doughnut like circles in both forward and reverse and listen for axle noise. If bad, it may click while turning. My opinion regarding repair/replacement of boots: it's already too late for the axle, and it's ultimately more cost-effective to leave it alone and plan to change out the entire axle instead. You are going to pay a lot to have boots replaced or axles rebuilt, and it may be more cost-efficient to just have the axle replaced; especially since many after-market axles are warranted for life of the car. Doc Disclaimer: Much of the information I pass on is speculation, based on my experience with Honda transmissions. My experience includes 8 years building and rebuilding Honda torque convertors, 6 years of building/analyzing/rebuilding Honda automatic transmissions, and 10 years as owner of Honda Accords(currently 5). Please use this information for reference only. "Google Beta User" > wrote in message oups.com... > 91 Accord LX. > > I don't know that it's the engine, I suspect it's the wheels. It is > audible at lower speeds (under 10 mph). The best way I can describe it > is a clanking noise as opposed to a grinding noise. > > As far as I can tell, the car is driving fine - I get on the highway to > to to work everyday. Anti-Freeze filled, oil change done, tires changed > and balanced.... > > I put the question mark because I'm not even sure that the wheels are > actually the problem. > |
#7
|
|||
|
|||
GBU:
Agree with Curly:First thing to do- Check torque on lugnuts, especially if rims are alloy. First action to take when you notice any noises when moving. Alloy rims are notorious for lugnuts loosening, especially after having been recently removed and retightened. Symptoms of loose lugnuts may be similar to bad wheel bearing noise: whines at highway speeds, gets worse when negotiating a curve in one direction and quiets down when curving in the other direction. Hard to localize wheel bearing noise; I just paid a dealer to change the wrong one, and then had to pay again to have them change the bad one. To test for bad axles: look for split-open drive boots. If the boot has split open, grease has been flung out and grit and water have gotten in. Also, find a wide open space like a parking lot, turn the wheel sharply to one side(without holding it tightly agains the stop on the steering wheel), and (safely!)perform tight doughnut like circles in both forward and reverse and listen for axle noise. If bad, it may click while turning. My opinion regarding repair/replacement of boots: it's already too late for the axle, and it's ultimately more cost-effective to leave it alone and plan to change out the entire axle instead. You are going to pay a lot to have boots replaced or axles rebuilt, and it may be more cost-efficient to just have the axle replaced; especially since many after-market axles are warranted for life of the car. Doc Disclaimer: Much of the information I pass on is speculation, based on my experience with Honda transmissions. My experience includes 8 years building and rebuilding Honda torque convertors, 6 years of building/analyzing/rebuilding Honda automatic transmissions, and 10 years as owner of Honda Accords(currently 5). Please use this information for reference only. "Google Beta User" > wrote in message oups.com... > 91 Accord LX. > > I don't know that it's the engine, I suspect it's the wheels. It is > audible at lower speeds (under 10 mph). The best way I can describe it > is a clanking noise as opposed to a grinding noise. > > As far as I can tell, the car is driving fine - I get on the highway to > to to work everyday. Anti-Freeze filled, oil change done, tires changed > and balanced.... > > I put the question mark because I'm not even sure that the wheels are > actually the problem. > |
#8
|
|||
|
|||
Interesting that none of you have suggested Engine problems.
I haven't checked it out by the way, I probably won't until this weekend. My reasoning is that so far, it's driving well and the breaks seem fine. I was going to change the tire and put it back on, but then the lugnuts were on tight enough that I felt I better not mess with it. Thanks for all your advice, I'll get it checked as soon as I can, I hope it survives until then. |
#9
|
|||
|
|||
Interesting that none of you have suggested Engine problems.
I haven't checked it out by the way, I probably won't until this weekend. My reasoning is that so far, it's driving well and the breaks seem fine. I was going to change the tire and put it back on, but then the lugnuts were on tight enough that I felt I better not mess with it. Thanks for all your advice, I'll get it checked as soon as I can, I hope it survives until then. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 7 | February 1st 05 01:43 PM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | January 2nd 05 05:15 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | December 18th 04 05:15 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | November 16th 04 05:28 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | November 1st 04 05:24 AM |