Idle jet on Brosol 30/31?

Hi,

Another Brosol 30/31 question! I didn't get any literature with my carb and
I was wondering which jet is the idle jet - is it the one nearest to the
bowl?

TIA,

--Steve

Its up high, 8mm brass hex head, near the electric choke element,
marked with a "50", "55", or sometimes "955". The center looks
like it's plugged with a shiny ball bearing or a brass plug.

Depending on the engine application, you will normally find a
50 or 55.


RT
--
E-mail=fullname-at-telus.net

"Phatman" > wrote in message
...
> Hi,
>
> Another Brosol 30/31 question! I didn't get any literature with my carb
> and I was wondering which jet is the idle jet - is it the one nearest to
> the bowl?
>
> TIA,
>
> --Steve
>

Thanks for that Raymond. I noticed the jet on top (vertically fitted) right
next to the intake was blocked so I replaced it with an identical one from
the Solex, I'm assuming it should have a hole on the top :-)

--Steve





"Raymond Lowe" > wrote in message
news:W8qXd.10969$i6.574@edtnps90...
> Its up high, 8mm brass hex head, near the electric choke element,
> marked with a "50", "55", or sometimes "955". The center looks
> like it's plugged with a shiny ball bearing or a brass plug.
>
> Depending on the engine application, you will normally find a
> 50 or 55.
>
>
> RT
> --
> E-mail=fullname-at-telus.net
>
> "Phatman" > wrote in message
> ...
>> Hi,
>>
>> Another Brosol 30/31 question! I didn't get any literature with my carb
>> and I was wondering which jet is the idle jet - is it the one nearest to
>> the bowl?
>>
>> TIA,
>>
>> --Steve
>>
>
>