If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
a/c clutch hub remover tool
I have a '98 SL1 and the plastic part on the clutch hub broke off. I got a
new clutch from Auto Zone but they didn't have a remover that fit the hub. Is there a specal one that only saturn carries or can I just order one of the kit off the internet? |
Ads |
#2
|
|||
|
|||
a/c clutch hub remover tool
rock295 wrote: > I have a '98 SL1 and the plastic part on the clutch hub broke off. I got a > new clutch from Auto Zone but they didn't have a remover that fit the hub. > Is there a specal one that only saturn carries or can I just order one of > the kit off the internet? Since you are trashing the one you have on there, can you not just pry it off? Maybe try sliding a piece of piano wire or something similar between the plate and pulley and pull on the wire from both ends to help pull the plastic off. Otherwise, get a piece of aluminum bar about 2 or 3" long and 1" width, drill a hole in the center of the bar and tap it for a bolt of appropriate size such that it is a little smaller than the bolt you removed from the clutch there. Then drill a hole on each end of the bar straight thru the plastic clutch cover and attach it with small, robust tapping screws. Then install your center bolt into the bar and turn it to start extracting the plastic cover. cheers, dave mc |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
squeaking clutch at friction point | sandheep | Mazda | 26 | February 17th 06 01:30 PM |
For you tool lovers(OT) | Old Crow | Jeep | 21 | December 8th 05 12:37 AM |
What now?? (Clutch slave again) | Eric | Jeep | 11 | May 29th 05 06:38 AM |
Wrong Clutch Fork? | Michael White | Jeep | 6 | February 8th 05 02:33 AM |
Clutch Questions | Jeff Strickland | BMW | 5 | December 14th 04 11:45 PM |