If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. 


Thread Tools  Display Modes 
#1




Calculating final nitrate level after water change
Hello,
I realize this is probably a fairly simple equation, but I'm really struggling with it. I'm trying to create a formula (perhaps to eventually work into a classroom lesson) to predict the nitrate concentration in the aquarium AFTER a partial water change. This is complicated by the fact that I use natural ocean water, which, at least in this area, is NOT nitrate free (low, but not free). I realize I could just ignore this semiinsignificant factor, but the point of this is to include all inputs. Any ideas? Thanks Ryan Lenz 
#2




Calculating final nitrate level after water change

#3




Calculating final nitrate level after water change
George Patterson wrote:
If you want the entire thing as a single equation, RN = (N * (1  (GC / TS))) + (N2 * GC / TS). By the way, "TS" in there is the actual amount of water in the tank, which is usually less than the tank size because of the rock, substrate, etc. in the tank. For example, my 125 gallon tank probably only has about 90 gallons of water in it. Running this exercise with my tank, TS would be 90. George Patterson No one ever says "It's only a game." when his team is winning. 
#4




Calculating final nitrate level after water change
"George Patterson" wrote in message news:[email protected]
Yeah, it's pretty simple. You are correct! It was pretty simple... and you did a good job with it :) Let me challenge you with a different mathematical problem: Let's find out how many (x)% water changes we will need to bring (Y) ppm nitrates down to (Z) ppm level :) Let's simplify the problem (for now) by assuming the tank DOES NOT produce additional nitrates between water changes and the water we use for partial changes is pu (0) ppm NO3. For example: Jaime has now 100 ppm of nitrates in his tank. How many 10% water changes does he need to do next weekend to bring nitrates down to  let's say 510 ppm. Of course it will be easy to plug the numbers into your previous equation for couple of times, and than again and again to get the final number, but what I am asking for is a generic solution :) Can you assemble an equation to solve this problem ? :) 
#5




Calculating final nitrate level after water change
Pszemol wrote:
Can you assemble an equation to solve this problem ? :) Us a variation of compound interest calculations. Let n be the number of water changes, N1 be the initial nitrate level, N2 be the desired nitrate level, and P be the percentage of water changed. Then n = log(N2 / N1) / log(1  P) Solving for N1 = 100, N2 = 10, and P = .1, get get 21.85434512 changes. Solving for N2 = 20, we get 15.2755317. George Patterson No one ever says "It's only a game." when his team is winning. 
#6




Calculating final nitrate level after water change
"George Patterson" wrote in message news:Cc6uh.1262$FN1.1231[email protected]
Pszemol wrote: Can you assemble an equation to solve this problem ? :) Us a variation of compound interest calculations. Let n be the number of water changes, N1 be the initial nitrate level, N2 be the desired nitrate level, and P be the percentage of water changed. Then n = log(N2 / N1) / log(1  P) Solving for N1 = 100, N2 = 10, and P = .1, get get 21.85434512 changes. Solving for N2 = 20, we get 15.2755317. Very good! We should name you a Group Math Wizard 
#7




Calculating final nitrate level after water change
lol I was beginning to think I was back in high school algebra
"Pszemol" wrote in message ... "George Patterson" wrote in message news:[email protected] Pszemol wrote: Can you assemble an equation to solve this problem ? :) Us a variation of compound interest calculations. Let n be the number of water changes, N1 be the initial nitrate level, N2 be the desired nitrate level, and P be the percentage of water changed. Then n = log(N2 / N1) / log(1  P) Solving for N1 = 100, N2 = 10, and P = .1, get get 21.85434512 changes. Solving for N2 = 20, we get 15.2755317. Very good! We should name you a Group Math Wizard 
#8




Calculating final nitrate level after water change
Pszemol wrote:
Very good! We should name you a Group Math Wizard I don't think so. I'm pretty good at Algebra, but Trig is a lot of work, and I was glad to see the last of Calculus. George Patterson No one ever says "It's only a game." when his team is winning. 
#9




Let us take the example of a 125 gallon tank and the nitrate content of 50 ppm. We will change 25 gallons of water and water, no measurable nitrate. Second, 20%, five gallons of water, we will cancel the 1 / 5 of the nitrate. In other words, 80% of the nitrate will remain in the tank.

#10




Let's abridge the botheration (for now) by bold the tank DOES NOT aftermath added nitrates amid baptize changes and the baptize we use for fractional changes is pu (0) ppm NO3. For example: Jaime has now 100 ppm of nitrates in his tank. How abounding 10% baptize changes does he charge to do next weekend to accompany nitrates down to  let's say 510 ppm.

Thread Tools  
Display Modes  


Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Please Critique This Pond Advice  [email protected]  General  4  May 5th 06 02:56 AM 
water cooler, water coolers, water dispenser, water dispensers,bottleless water cooler,bottleless water coolers,bottleless water dispenser,bottleless water dispensers  water coolers  General  0  January 5th 06 09:09 AM 
water cooler, water coolers, water dispenser, water dispensers,bottleless water cooler,bottleless water coolers,bottleless water dispenser,bottleless water dispensers  water coolers  Reefs  0  January 5th 06 09:06 AM 
No Better RO/DI Anywhere!!!  Pat Hogan  General  0  November 14th 03 05:57 PM 
Hard Water Tetras?  rapdor  General  7  September 14th 03 12:35 PM 