If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How Do I Get the Water Out When Changing Antifreeze?
I've had this problem with most of the cars I've owned.
When you read instructions for changing antifreeze they almost always say something to the effect that, "It's simple. Anyone can do it." Then proceed to give some simpleminded drain and refill instructions. Well, I've rebuilt engines and overhauled transmissions and repaired virtually every part of a car, but I don't find changing the antifreeze easy. For me, the flushing part is easy -- I use one of those Prestone backflush gadgets that go on a heater hose. The problem comes replacing the antifreeze. When I open the petcock on the radiator I can never get enough water to drain out to allow me to replace enough antifreeze to create a 50/50 mix -- too much water stays in the block. As a hypothetical example, assume the cooling system capacity is 12 quarts. You need to add a gallon and a half of antifreeze to create a 50/50 mix. But, after draining all the water I can get to come out of the radiator petcock it will only take one gallon of antifreeze. I don't understand why others don't have this problem, but I never see anyone mention it. It's true, if you can find, get to and remove the block plug you can drain enough out, but the instructions never mention the block plug. I often find it is rusted or seized to the point it won't come out, or it's in some godawful location and with the engine hot you burn you hands trying to reach it. I have a permanent scar the size of a quarter on the back of my hand where I touched he exhaust manifold while loosening the block plug about twenty years ago. How do others drain the cooling system sufficiently to allow replacing enough antifreeze/coolant? (And, god help the people who buy prediluted antifreeze that requires you drain the system completely.) |
Ads |
#2
|
|||
|
|||
How Do I Get the Water Out When Changing Antifreeze?
On Mon, 23 Feb 2009 16:31:51 -0600, jim evans
> wrote: >I've had this problem with most of the cars I've owned. > >When you read instructions for changing antifreeze they almost always >say something to the effect that, "It's simple. Anyone can do it." >Then proceed to give some simpleminded drain and refill instructions. >Well, I've rebuilt engines and overhauled transmissions and repaired >virtually every part of a car, but I don't find changing the >antifreeze easy. > >For me, the flushing part is easy -- I use one of those Prestone >backflush gadgets that go on a heater hose. The problem comes >replacing the antifreeze. When I open the petcock on the radiator I >can never get enough water to drain out to allow me to replace enough >antifreeze to create a 50/50 mix -- too much water stays in the block. >As a hypothetical example, assume the cooling system capacity is 12 >quarts. You need to add a gallon and a half of antifreeze to create a >50/50 mix. But, after draining all the water I can get to come out of >the radiator petcock it will only take one gallon of antifreeze. > >I don't understand why others don't have this problem, but I never see >anyone mention it. > >It's true, if you can find, get to and remove the block plug you can >drain enough out, but the instructions never mention the block plug. > >I often find it is rusted or seized to the point it won't come out, or >it's in some godawful location and with the engine hot you burn you >hands trying to reach it. I have a permanent scar the size of a >quarter on the back of my hand where I touched he exhaust manifold >while loosening the block plug about twenty years ago. > >How do others drain the cooling system sufficiently to allow replacing >enough antifreeze/coolant? (And, god help the people who buy >prediluted antifreeze that requires you drain the system completely.) I've always been able to make *just* enough room for the needed antifreeze by running the engine to push just a bit more water out while it's draining. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Deep water/fluid changing question | 56 | Jeep | 4 | October 22nd 08 09:49 AM |
Changing antifreeze when changing water pump | Sasha | Technology | 14 | February 5th 07 04:55 PM |
antifreeze concentrations and leaking water pump | [email protected] | Chrysler | 30 | February 18th 06 03:56 AM |
Changing Water Pump on 2003 Grand Caravan SE / Need Schematics | news.cox.net | Dodge | 3 | January 30th 06 04:44 PM |
Changing Antifreeze | Stephen Saunders | Ford Explorer | 2 | March 31st 05 07:47 AM |