If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
On 26 Sep 2006 05:29:12 -0700, "duty-honor-country"
> wrote: >Bob, you worked as a phone guy for Bell Telephone- what the hell do you >know about a torqueflite ? <snip> I've rebuild two years ago. How many have you done? Start of paranoid delusional "projection" rant: >What a windbag .... > >Those suggestions you put up above, are from some old transmission >repair manual, no doubt. I wager you bought an old Chrysler repair >book at a yard sale for $1, and are now dispensing your vast stores of >written knowledge on Usenet. End of paranoid delusional "projection" rant. What you've just admitted is how you do things, Noodles. Projection like this is how many schizophrenics/psychotics/paranoid delusionals try to impress people that they are sane...and you do it all the time. By the way...I get a nice, fat pension and savings plan dividend check every month. You get what....SSI? |
Ads |
#12
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
"DeserTBoB" > wrote in message ... > On 26 Sep 2006 17:48:59 -0700, "cjboater" > wrote: > >> Dump the shift kit. Never heard of a "Fairbanks" shift kit for any > Torqueflite. Go back stock, and pay SPECIAL attention to placement of > those check balls. Fairbanks is an old and well-respected name in performance transmissions and parts, they are now in league with Superior and their Transaction® shift kits are basically the same as the TransGo and B&M Transpak®. A properly installed shift kit is an enhancement to the transmission so I would disagree on removing it. |
#13
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
On Wed, 27 Sep 2006 11:52:24 -0700, "John Kunkel" >
wrote: >Fairbanks is an old and well-respected name in performance transmissions and >parts, they are now in league with Superior and their Transaction® shift >kits are basically the same as the TransGo and B&M Transpak®. >A properly installed shift kit is an enhancement to the transmission so I >would disagree on removing it. <snip> Superior and especially B&M, as well as TransGo I know. Fairbanks must not be marketed well in this area, as I've never come across them out here. B&M, which got its start out here with performance kits for cast iron HydraMatics in the '50s, ran the whole show until ATP went nationwide with their excellent TransGo® kits. The problem here is that he made a change to the valving, got everything together and all hell broke loose. To do any troubleshooting, I'd think it'd be wise to go back to the stock valve body configuration, then look at control pressure and then what the pattern's doing. Already, according to the OP, one of the check balls was deleted, which I diagnosed right off. The shift kit may, or may *not* be causitive here, so removing it and going to stock will allow diagnosis of the front clutch action, as well as the kickdown band. A "late" shift to direct would seem to eliminate the kickdown band being maladjusted extremely tight, but it doesn't clear the servo being either stuck mechnically or hydrualically. It's possible, with a misapplied check ball, to have the band servo apply and then have no exhaust passage, thus giving the situation that Steve alludes to of the box trying to lock itself up. However, the OP says he now gets direct, but very late, so I'm thinking that the servo is mechanically OK, but MAY be hydraulically held operated. Thus, going back to the original valve body configuration may (or may not) see if that problem is cleared, as well. If the kickdown band servo isn't helped by going back to original, I'd take a very harsh look at a screwed up/jammed front clutch seal ring. This would also cause low control pressure, which would also cause a late and soft 2-3. It's also possible, with very low control pressure, that the 3500 RPM he's reporting before getting direct could be a lot of slippage, as well. |
#14
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
On 26 Sep 2006 17:48:59 -0700, "cjboater" > wrote:
> I'm going to try adjusting the tv cable a bit more tonight and see if >the shift points get better. <snip> There's only one optimal position for the TV cable to be in...lever fully actuated at full throttle. Since you've done a transplant, it's possible that the throttle linkage geometry is screwed up now, which will give you a hosed up pattern and an improper coast-down 2-1. Like the old HydraMatics, the Torqueflite requires the TV linkage to track properly in order to program the TV to give the right shift points and firmness at the right power settings. If you're not getting enough cable draw action from idle to full throttle, you will get high shift points and high coast down downshifts, assuming you set the linkage properly for being fully actuated at full throttle. If you maladjust for lower points, you'll have no kickdown and sloppy shifts under power. |
#15
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
John Kunkel wrote: > "DeserTBoB" > wrote in message > ... > > On 26 Sep 2006 17:48:59 -0700, "cjboater" > wrote: > > > >> Dump the shift kit. Never heard of a "Fairbanks" shift kit for any > > Torqueflite. Go back stock, and pay SPECIAL attention to placement of > > those check balls. > > Fairbanks is an old and well-respected name in performance transmissions and > parts, they are now in league with Superior and their Transaction® shift > kits are basically the same as the TransGo and B&M Transpak®. > A properly installed shift kit is an enhancement to the transmission so I > would disagree on removing it. John, This "desertbob" character is a poser who is posting from auto repair manuals- he doesn't have any hands on experience fixing cars. This is the same guy that disassembled an entire 318 motor, when all it needed was a new thersmostat. So of course, he knows nothing about Fairbanks. You are correct in that they make top-notch converters and trans parts. You are correct- a shift kit for an auto trans will "firm up" the shifts, which causes a quick, abrupt shift- and LESS SLIPPAGE- shift kits will extend band and clutch pack life. In 1985 I had a TH350 GM auto trans rebuilt, and put a B&M transpak shift kit in it, but retained the modulator for street part-throttle driving. (the most drastic kit mode specified to remove the modulator for very high upshift points for racing) That transmission is still in my Firebird to this date, has never caused any problems, and has been drag raced extensively at the track, and driven very hard on the street. Had it not been for the kit, the trans would be toast by now. Synthetic trans fluid helped too, of course. |
#17
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
duty-honor-country aka Charlie Nudo wrote: > John Kunkel wrote: > > "DeserTBoB" > wrote in message > > ... > > > On 26 Sep 2006 17:48:59 -0700, "cjboater" > wrote: > > > > > >> Dump the shift kit. Never heard of a "Fairbanks" shift kit for any > > > Torqueflite. Go back stock, and pay SPECIAL attention to placement of > > > those check balls. > > > > Fairbanks is an old and well-respected name in performance transmissions and > > parts, they are now in league with Superior and their Transaction® shift > > kits are basically the same as the TransGo and B&M Transpak®. > > A properly installed shift kit is an enhancement to the transmission so I > > would disagree on removing it. > > > John, > > This "desertbob" character is a poser who is posting from auto repair > manuals- he doesn't have any hands on experience fixing cars. Charlie Nudo, why yet another new Google account? > You are correct- a shift kit for an auto trans will "firm up" the > shifts, which causes a quick, abrupt shift- and LESS SLIPPAGE- shift > kits will extend band and clutch pack life. > > In 1985 I had a TH350 GM auto trans rebuilt, and put a B&M transpak > shift kit in it, but retained the modulator for street part-throttle > driving. (the most drastic kit mode specified to remove the modulator > for very high upshift points for racing) That transmission is still in > my Firebird to this date, has never caused any problems, and has been > drag raced extensively at the track, and driven very hard on the > street. Had it not been for the kit, the trans would be toast by now. Total lie. He had an old beat to **** pontiac years ago. Charlie is the biggest blowhard on Usenet always talking about his adventures when the truth is he just a overweight dumpster diver who is on SSI. You take many pictures for your failed Ebay auctions, why not show them a recent picture of this great car? |
#18
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
"DeserTBoB" > wrote in message ... > On Wed, 27 Sep 2006 11:52:24 -0700, "John Kunkel" > > wrote: > >>Fairbanks is an old and well-respected name in performance transmissions >>and >>parts, they are now in league with Superior and their Transaction® shift >>kits are basically the same as the TransGo and B&M Transpak®. >>A properly installed shift kit is an enhancement to the transmission so I >>would disagree on removing it. <snip> > > Superior and especially B&M, as well as TransGo I know. Fairbanks > must not be marketed well in this area, as I've never come across them > out here. B&M, which got its start out here with performance kits for > cast iron HydraMatics in the '50s, ran the whole show until ATP went > nationwide with their excellent TransGo® kits. Fairbanks kits are the same as Superior, they're in bed together. B&M didn't actually make "kits" for the iron Hydro, they built a unit manual controlled Hydro called the Hydro-Stik with the famous logo of a robot holding a shift lever. TransGo is independent of ATP and is marketed through many other vendors. > The problem here is that he made a change to the valving, got > everything together and all hell broke loose. The "change in valving" had nothing to do with it. > Already, according to the OP, one of the check balls > was deleted, which I diagnosed right off. The shift kit may, or may > *not* be causitive here, so removing it and going to stock will allow > diagnosis of the front clutch action, as well as the kickdown band. The missing #3 ball was the cause for no 2-3 upshift (you weren't alone in suggesting that) and the backflow through the missing check ball partially applied the rear band which accounts for the "bogging" feeling. The remainder of the OP's current late shift timing issues are related to throttle pressure adjustment and not the shift kit. The late 2-3 upshift and the early forced kickdown are solely the result of too much throttle pressure for the throttle opening; a simple cable/linkage adjustment should solve that problem. |
#19
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
"DeserTBoB" > wrote in message ... > On 28 Sep 2006 05:22:23 -0700, "duty-honor-country" > > wrote: > >>John, >> >>This "desertbob" character <snip> > > ...just busted you with yet another sock puppet account... > that you opened today. > > Add to your kill filers. > >>You are correct- a shift kit for an auto trans will "firm up" the >>shifts, which causes a quick, abrupt shift- and LESS SLIPPAGE- shift >>kits will extend band and clutch pack life. <snip> > > "Trans kits" are unnecessary in 90% of applications...idiot. It isn't about "necessary", 99% of vehicle modifications aren't necessary but if they enhance performance/longevity and driving pleasure there is no reason not to make the mods. It's a matter of personal choice, and advising people to not use them or to remove existing mods is a singular view. |
#20
|
|||
|
|||
torqueflite 727 problem, need help....please. Long, sorry.
"duty-honor-country" > wrote in message ups.com... John Kunkel wrote: > "DeserTBoB" > wrote in message > ... > > On 26 Sep 2006 17:48:59 -0700, "cjboater" > wrote: > > > >> Dump the shift kit. Never heard of a "Fairbanks" shift kit for any > > Torqueflite. Go back stock, and pay SPECIAL attention to placement of > > those check balls. > > Fairbanks is an old and well-respected name in performance transmissions > and > parts, they are now in league with Superior and their Transaction® shift > kits are basically the same as the TransGo and B&M Transpak®. > A properly installed shift kit is an enhancement to the transmission so I > would disagree on removing it. John, This "desertbob" character is a poser who is posting from auto repair manuals- he doesn't have any hands on experience fixing cars. Duly noted, but even a blind squirrel occasionally finds a nut. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 2 | August 23rd 06 05:59 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 2 | August 8th 06 05:22 AM |
Keyless entry problem - 1999 New Beetle | [email protected] | VW water cooled | 3 | August 2nd 06 09:45 PM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 2 | July 8th 06 05:37 AM |
CJ - backfiring problem help (a little long) | [email protected] | Jeep | 10 | June 15th 06 04:12 AM |