If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
So, it may not be the BCM problem, what else?
Hello!
First thanks for The Bathtub Admiral for giving me the suggestion to check around the PCB for all the solder joints for this problem. Before I start to do that, anyone has any other ideas on my car problem so that I can try to do them together when I take the car apart? Thanks a lot. Intrepid 97, 130K miles. Problems: 1) windshield wiper starts as soon as I start the car, will not stop. 2) the interior lights do not work. 3) Gas and speed meters (sometimes other meters join the party too) on the cluster panel seem funny and shake around even the car stays still on ground. 4) Power door locks do not work. (power window work) 5) The sound from engine sounds like running not stable (sometimes faster, sometimes slower). 6) If I drive it, some kind of "choking" sound from the below of the car, and the car drives like hitting a rock every several seconds. 7) If I take off the BCM and start the car, the meters on the cluster panel have no readings, and all other problem exist. Have checked: 1) multi function switch and the headlights switch, seem OK. (all problems still exist even if I take these two off). 2) changed the BCM (got one from junk yard), all problems still exist. 3) all fuses seem OK. I also tried to switch the relays in the power box to see if anything will happen, seems no difference. 4) I checked the battery and its grounding, seems OK. A small painfull video is here if you like to have a look (each about 550K, same content, different video format): http://www2.uic.edu/~kzhao3/carproblem.rm http://www2.uic.edu/~kzhao3/carproblem.wmv So, any other suggestions? Thanks a lot and have a great weekend. |
Ads |
#2
|
|||
|
|||
Because the BCM is but one of many items on the network, your going to have
to find out if the network is intact if there is a short in the twisted CCD wires anywhere and if any node is screwing things up for the rest. This is where you need a scan tool basically, no real way around it. Have you checked for codes by cycling the key on-off-on-off-on and counting the 2 digit flashes? "Kaidi" > wrote in message om... > Hello! > > First thanks for The Bathtub Admiral for giving me the suggestion to > check around the PCB for all the solder joints for this problem. > Before I start to do that, anyone has any other ideas on my car > problem so that I can try to do them together when I take the car > apart? Thanks a lot. > > Intrepid 97, 130K miles. > > Problems: > 1) windshield wiper starts as soon as I start the car, will not stop. > 2) the interior lights do not work. > 3) Gas and speed meters (sometimes other meters join the party too) on > the cluster panel seem funny and shake around even the car stays still > on ground. > 4) Power door locks do not work. (power window work) > 5) The sound from engine sounds like running not stable (sometimes > faster, sometimes slower). > 6) If I drive it, some kind of "choking" sound from the below of the > car, and the car drives like hitting a rock every several seconds. > 7) If I take off the BCM and start the car, the meters on the cluster > panel have no readings, and all other problem exist. > > Have checked: > 1) multi function switch and the headlights switch, seem OK. (all > problems still exist even if I take these two off). > 2) changed the BCM (got one from junk yard), all problems still exist. > 3) all fuses seem OK. I also tried to switch the relays in the power > box to see if anything will happen, seems no difference. > 4) I checked the battery and its grounding, seems OK. > > A small painfull video is here if you like to have a look (each about > 550K, same content, different video format): > http://www2.uic.edu/~kzhao3/carproblem.rm > http://www2.uic.edu/~kzhao3/carproblem.wmv > > So, any other suggestions? > > Thanks a lot and have a great weekend. |
#3
|
|||
|
|||
Because the BCM is but one of many items on the network, your going to have
to find out if the network is intact if there is a short in the twisted CCD wires anywhere and if any node is screwing things up for the rest. This is where you need a scan tool basically, no real way around it. Have you checked for codes by cycling the key on-off-on-off-on and counting the 2 digit flashes? "Kaidi" > wrote in message om... > Hello! > > First thanks for The Bathtub Admiral for giving me the suggestion to > check around the PCB for all the solder joints for this problem. > Before I start to do that, anyone has any other ideas on my car > problem so that I can try to do them together when I take the car > apart? Thanks a lot. > > Intrepid 97, 130K miles. > > Problems: > 1) windshield wiper starts as soon as I start the car, will not stop. > 2) the interior lights do not work. > 3) Gas and speed meters (sometimes other meters join the party too) on > the cluster panel seem funny and shake around even the car stays still > on ground. > 4) Power door locks do not work. (power window work) > 5) The sound from engine sounds like running not stable (sometimes > faster, sometimes slower). > 6) If I drive it, some kind of "choking" sound from the below of the > car, and the car drives like hitting a rock every several seconds. > 7) If I take off the BCM and start the car, the meters on the cluster > panel have no readings, and all other problem exist. > > Have checked: > 1) multi function switch and the headlights switch, seem OK. (all > problems still exist even if I take these two off). > 2) changed the BCM (got one from junk yard), all problems still exist. > 3) all fuses seem OK. I also tried to switch the relays in the power > box to see if anything will happen, seems no difference. > 4) I checked the battery and its grounding, seems OK. > > A small painfull video is here if you like to have a look (each about > 550K, same content, different video format): > http://www2.uic.edu/~kzhao3/carproblem.rm > http://www2.uic.edu/~kzhao3/carproblem.wmv > > So, any other suggestions? > > Thanks a lot and have a great weekend. |
#4
|
|||
|
|||
Yes, I have tried the key on off way, it only has the code saying
battery disconnected recently. No other code. I will start to check the PCM this afternoon (cause it just came to my mind that just before all these problem started, I accidently dropped some coolant outside the coolant tank. Since PCM is quite near that, I may first check it. I will update the info later when I take it off. Thanks a lot. :-) "The Bathtub Admiral" > wrote in message news:<sa5ad.4452$qU.4028@clgrps13>... > Because the BCM is but one of many items on the network, your going to have > to find out if the network is intact if there is a short in the twisted CCD > wires anywhere and if any node is screwing things up for the rest. This is > where you need a scan tool basically, no real way around it. Have you > checked for codes by cycling the key on-off-on-off-on and counting the 2 > digit flashes? |
#5
|
|||
|
|||
Yes, I have tried the key on off way, it only has the code saying
battery disconnected recently. No other code. I will start to check the PCM this afternoon (cause it just came to my mind that just before all these problem started, I accidently dropped some coolant outside the coolant tank. Since PCM is quite near that, I may first check it. I will update the info later when I take it off. Thanks a lot. :-) "The Bathtub Admiral" > wrote in message news:<sa5ad.4452$qU.4028@clgrps13>... > Because the BCM is but one of many items on the network, your going to have > to find out if the network is intact if there is a short in the twisted CCD > wires anywhere and if any node is screwing things up for the rest. This is > where you need a scan tool basically, no real way around it. Have you > checked for codes by cycling the key on-off-on-off-on and counting the 2 > digit flashes? |
#6
|
|||
|
|||
check for loose grounds under the center console in front of the shifter
Kaidi wrote: > Hello! > > First thanks for The Bathtub Admiral for giving me the suggestion to > check around the PCB for all the solder joints for this problem. > Before I start to do that, anyone has any other ideas on my car > problem so that I can try to do them together when I take the car > apart? Thanks a lot. > > Intrepid 97, 130K miles. > > Problems: > 1) windshield wiper starts as soon as I start the car, will not stop. > 2) the interior lights do not work. > 3) Gas and speed meters (sometimes other meters join the party too) on > the cluster panel seem funny and shake around even the car stays still > on ground. > 4) Power door locks do not work. (power window work) > 5) The sound from engine sounds like running not stable (sometimes > faster, sometimes slower). > 6) If I drive it, some kind of "choking" sound from the below of the > car, and the car drives like hitting a rock every several seconds. > 7) If I take off the BCM and start the car, the meters on the cluster > panel have no readings, and all other problem exist. > > Have checked: > 1) multi function switch and the headlights switch, seem OK. (all > problems still exist even if I take these two off). > 2) changed the BCM (got one from junk yard), all problems still exist. > 3) all fuses seem OK. I also tried to switch the relays in the power > box to see if anything will happen, seems no difference. > 4) I checked the battery and its grounding, seems OK. > > A small painfull video is here if you like to have a look (each about > 550K, same content, different video format): > http://www2.uic.edu/~kzhao3/carproblem.rm > http://www2.uic.edu/~kzhao3/carproblem.wmv > > So, any other suggestions? > > Thanks a lot and have a great weekend. |
#7
|
|||
|
|||
check for loose grounds under the center console in front of the shifter
Kaidi wrote: > Hello! > > First thanks for The Bathtub Admiral for giving me the suggestion to > check around the PCB for all the solder joints for this problem. > Before I start to do that, anyone has any other ideas on my car > problem so that I can try to do them together when I take the car > apart? Thanks a lot. > > Intrepid 97, 130K miles. > > Problems: > 1) windshield wiper starts as soon as I start the car, will not stop. > 2) the interior lights do not work. > 3) Gas and speed meters (sometimes other meters join the party too) on > the cluster panel seem funny and shake around even the car stays still > on ground. > 4) Power door locks do not work. (power window work) > 5) The sound from engine sounds like running not stable (sometimes > faster, sometimes slower). > 6) If I drive it, some kind of "choking" sound from the below of the > car, and the car drives like hitting a rock every several seconds. > 7) If I take off the BCM and start the car, the meters on the cluster > panel have no readings, and all other problem exist. > > Have checked: > 1) multi function switch and the headlights switch, seem OK. (all > problems still exist even if I take these two off). > 2) changed the BCM (got one from junk yard), all problems still exist. > 3) all fuses seem OK. I also tried to switch the relays in the power > box to see if anything will happen, seems no difference. > 4) I checked the battery and its grounding, seems OK. > > A small painfull video is here if you like to have a look (each about > 550K, same content, different video format): > http://www2.uic.edu/~kzhao3/carproblem.rm > http://www2.uic.edu/~kzhao3/carproblem.wmv > > So, any other suggestions? > > Thanks a lot and have a great weekend. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New *FREE* Corvette Discussion Forum | JLA ENTERPRISES TECHNOLOGIES INTEGRATION | Corvette | 12 | November 30th 04 06:36 PM |
87 TBI Suburban bog / acceleration problem | Michael Vosk | 4x4 | 8 | September 29th 04 04:55 AM |
1996 Dodge Intrepid ABS problem | joe | Dodge | 0 | June 16th 04 05:53 PM |
1996 Intrepid ABS problem | joe | Dodge | 0 | May 25th 04 02:45 PM |