If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Intake Manifold Recommendation - Torker?
Ernie, I have a 1970 454 . I used to have the Torker on it and its
better than the stock manifold . No problem on hood clearance. But, i found the warmup characteristics of it not too good. Once the engine is warmed up, its fine. The Torker is a Single Plane manifold as you might know, and is really intended for racing. I switched to the Air Gap RPM Manifold by Edelbrock along with the required L88 hood for clearance, and the difference in low end torque was noticable. I have a 750 SpeedDemon double pumper mech secs no choke carb on it ... and it is an ideal match. Warm up characteristics are great, when first started it idles smooth at 750 rpm and when fully warm it idles at 950 rpm --- with no choke. Your best combo for added power is going to be with an L88 hood having the fresh air chamber and hi rise AirGap manifold. Dave |
Ads |
#2
|
|||
|
|||
Ernie, I have a 1970 454 . I used to have the Torker on it and its
better than the stock manifold . No problem on hood clearance. But, i found the warmup characteristics of it not too good. Once the engine is warmed up, its fine. The Torker is a Single Plane manifold as you might know, and is really intended for racing. I switched to the Air Gap RPM Manifold by Edelbrock along with the required L88 hood for clearance, and the difference in low end torque was noticable. I have a 750 SpeedDemon double pumper mech secs no choke carb on it ... and it is an ideal match. Warm up characteristics are great, when first started it idles smooth at 750 rpm and when fully warm it idles at 950 rpm --- with no choke. Your best combo for added power is going to be with an L88 hood having the fresh air chamber and hi rise AirGap manifold. Dave |
#4
|
|||
|
|||
wrote:
>> Ernie, I have a 1970 454 . I used to have the Torker on it and its >> better than the stock manifold . No problem on hood clearance. But, i >> found the warmup characteristics of it not too good. Once the engine >> is warmed up, its fine. The Torker is a Single Plane manifold as >> you might know, and is really intended for racing. I switched to the >> Air Gap RPM Manifold by Edelbrock along with the required L88 hood >> for clearance, and the difference in low end torque was noticable. I >> have a 750 SpeedDemon double pumper mech secs no choke carb on it >> ... and it is an ideal match. Warm up characteristics are great, >> when first started it idles smooth at 750 rpm and when fully warm it >> idles at 950 rpm --- with no choke. Your best combo for added power >> is going to be with an L88 hood having the fresh air chamber and hi >> rise AirGap manifold. >> >> Dave > <<<From: > Group: alt.discuss.clubs.public.christian.gays Subject: im > looking for a friend > Date: Mon, Jan 26, 2004, 6:13pm (PST+2) Organization: > WebTV Subscriber > > im a single male no children but did lose one to God many years ago > im a christian but have recently found myself fighting with > homesexual demons in my mind i am around children often and worry > about my feelings for them too id like someone other than my minister > to discuss this situation wioth > dave>>> -- My IMPROVED website now on my server @ http://earthnet.myftp.org It's a must-see! Expanding Online Store @ http://tinyurl.com/3bywg The CHEAPEST utility services in the UK :- http://tinyurl.com/3ff7m Back in Operation : The Blog With Teeth. : http://thebrainspot.blogspot.com |
#5
|
|||
|
|||
Sharron says of me :
'im a single male no children but did lose one to God many years ago im a christian but have recently found myself fighting with homesexual demons in my mind i am around children often and worry about my feelings for them too id like someone other than my minister to discuss this situation wioth dave>>>' -- ME: Bwwaaahhhahahah.....are you still using that old doctored up post of mine which doesnt represent the original Sharron ??!! You really need to have a love for the truth ! Cheers, Dave ______________________________ 'God doesnt believe in Atheists either' ______________________________ |
#6
|
|||
|
|||
Sharron says of me :
'im a single male no children but did lose one to God many years ago im a christian but have recently found myself fighting with homesexual demons in my mind i am around children often and worry about my feelings for them too id like someone other than my minister to discuss this situation wioth dave>>>' -- ME: Bwwaaahhhahahah.....are you still using that old doctored up post of mine which doesnt represent the original Sharron ??!! You really need to have a love for the truth ! Cheers, Dave ______________________________ 'God doesnt believe in Atheists either' ______________________________ |
#7
|
|||
|
|||
it's your's all rightdave, from inside the webtv firewall where you
THOUGHT you were safe asking for help with you little "problem" But then if I was a perv like dave the fundy fool having problems with homosexual feelings, I probably would deny it too. I think he uses his vet as an "extension" of his manhood...sure had bragged about it a lot!!! |
#8
|
|||
|
|||
it's your's all rightdave, from inside the webtv firewall where you
THOUGHT you were safe asking for help with you little "problem" But then if I was a perv like dave the fundy fool having problems with homosexual feelings, I probably would deny it too. I think he uses his vet as an "extension" of his manhood...sure had bragged about it a lot!!! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
M30 Intake Manifold | Bill | BMW | 6 | November 21st 04 11:39 AM |
AIr Intake for 325 E-30 | Surf | BMW | 1 | October 15th 04 10:36 PM |
Need Intake Maniford for Weber Carbs (1984 Spider Volace) | r.amber | Alfa Romeo | 0 | June 19th 04 10:28 PM |