Replacing brakes on a '86 Mustang GT

Just bought a '86 5.0 Mustang and would like to re-do the front brakes
with all new Rotors, Wheel bearings, Calipers and pads. No problem on
replacing the calipers and pads. But what is the best step by step
procedure for removing and installing new wheel bearings on new
rotors??? What other tools and parts will I need?

Xccel wrote:
> Just bought a '86 5.0 Mustang and would like to re-do the front brakes
> with all new Rotors, Wheel bearings, Calipers and pads. No problem on
> replacing the calipers and pads. But what is the best step by step
> procedure for removing and installing new wheel bearings on new
> rotors??? What other tools and parts will I need?
>
It's a pretty standard procedure. Hasn't changed on Fords since the 60's. Doing
new parts is exactly the same as doing it with the old parts; no special procedures.
Pack the new bearings with quality grease. Use a new seal.
Do you have the factory service manual yet? It's a bit expensive but you're
going to need it.

--
..boB
Arrived: 2006 FXDI, Red.
1997 HD FXDWG - Turbocharged Stolen 11/26/05 in Denver
1HD1GEL10VY3200010 CO License J5822Z
2001 Dodge Dakota QC 5.9/4x4/3.92
1966 Mustang Coupe - Daily Driver
1965 FFR Cobra - 427W EFI, Damn Fast.