If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cleveland Question?
Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but
got the engine and trans for $325. When I got the engine home checked the casting number on the block D2AE-CA this checked out, Intake manifold was 4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 in the corners, which means 2bbl heads. So you mean to tell me that someone removed the 4bbl heads and placed 2bbl heads back on, and left the 4 bolt main block and 4bbl intake. I guess this is possible. Was planning on placing this in my 71 coupe and taking out the original 302. I guess my guestion is, is this how you tell the difference between 2bbl and 4bbl heads on a cleveland? Thanks Dean. |
Ads |
#2
|
|||
|
|||
On Fri, 12 Nov 2004 14:50:23 -0500, "Dean" >
wrote: >Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but >got the engine and trans for $325. When I got the engine home checked the >casting number on the block D2AE-CA this checked out, Intake manifold was >4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 in >the corners, which means 2bbl heads. So you mean to tell me that someone >removed the 4bbl heads and placed 2bbl heads back on, and left the 4 bolt >main block and 4bbl intake. I guess this is possible. Was planning on >placing this in my 71 coupe and taking out the original 302. I guess my >guestion is, is this how you tell the difference between 2bbl and 4bbl heads >on a cleveland? > > Thanks Dean. > That is how you tell the difference...that and the larger port sizes on a 4v. Here's a page with some casting numbers: http://home.comcast.net/~jelerath/mu.../heads-fr.html It's been my understanding that 2v heads have more low-end and the 4v heads make their power high in the RPM range. |
#3
|
|||
|
|||
Dinsdale wrote:
> On Fri, 12 Nov 2004 14:50:23 -0500, "Dean" > > wrote: > > >>Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but >>got the engine and trans for $325. When I got the engine home checked the >>casting number on the block D2AE-CA this checked out, Intake manifold was >>4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 in >>the corners, which means 2bbl heads. So you mean to tell me that someone >>removed the 4bbl heads and placed 2bbl heads back on, and left the 4 bolt >>main block and 4bbl intake. I guess this is possible. Was planning on >>placing this in my 71 coupe and taking out the original 302. I guess my >>guestion is, is this how you tell the difference between 2bbl and 4bbl heads >>on a cleveland? >> >> Thanks Dean. >> > > > That is how you tell the difference...that and the larger port sizes > on a 4v. > > Here's a page with some casting numbers: > http://home.comcast.net/~jelerath/mu.../heads-fr.html > > > It's been my understanding that 2v heads have more low-end and the 4v > heads make their power high in the RPM range. > > Agree, the 4bbl heads are too big for the street, typically. Check your references - the '73 Q code very well could have the 2bbl heads, which are huge to begin with, leading into the "smog" motor era... Rob |
#4
|
|||
|
|||
FYI: Cleveland 4V heads feature larger ports/valves than the Cleveland 2V
heads. The 70-71 Cleveland 4V heads also feature a closed or quench-type combustion chamber - 2V heads feature an open combustion chamber. 2V heads also feature non-adjustable rocker arms. Cleveland 4V intake diameter 2.19", exhaust diameter 1.71" Cleveland 2V intake diameter 2.04", exhaust diameter 1.65" Yet another $.02 worth from a proud owner of a 1970 Mach 1 351C featuring 4V heads @ http://community.webshots.com/album/18644819fHAehGJAjt "Dean" > wrote in message ... > Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but > got the engine and trans for $325. When I got the engine home checked the > casting number on the block D2AE-CA this checked out, Intake manifold was > 4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 > in the corners, which means 2bbl heads. So you mean to tell me that > someone removed the 4bbl heads and placed 2bbl heads back on, and left the > 4 bolt main block and 4bbl intake. I guess this is possible. Was planning > on placing this in my 71 coupe and taking out the original 302. I guess > my guestion is, is this how you tell the difference between 2bbl and 4bbl > heads on a cleveland? > > Thanks Dean. |
#5
|
|||
|
|||
On Fri, 12 Nov 2004 14:50:23 -0500, Dean rearranged some electrons to
form: > Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but > got the engine and trans for $325. When I got the engine home checked the > casting number on the block D2AE-CA this checked out, Intake manifold was > 4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 > in the corners, which means 2bbl heads. So you mean to tell me that > someone removed the 4bbl heads and placed 2bbl heads back on, and left the > 4 bolt main block and 4bbl intake. I guess this is possible. Was planning > on placing this in my 71 coupe and taking out the original 302. I guess > my guestion is, is this how you tell the difference between 2bbl and 4bbl > heads on a cleveland? > > Thanks Dean. According to Ganahl's book, 351Cs in 73 had open chamber (2V) heads. However they may have varied, the 4V heads have open chambers with the (larger) 4V valves and port sizes. -- David M (dmacchiarolo) http://home.triad.rr.com/redsled T/S 53 sled351 Linux 2.4.18-14 has been up 3 days 10:21 |
#6
|
|||
|
|||
Thanks guys for all the info. I know all this,but still can't fiqure out if
the 73 Q code Cobra Jet had 2bbl heads. Dean. "Dean" > wrote in message ... > Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but > got the engine and trans for $325. When I got the engine home checked the > casting number on the block D2AE-CA this checked out, Intake manifold was > 4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 > in the corners, which means 2bbl heads. So you mean to tell me that > someone removed the 4bbl heads and placed 2bbl heads back on, and left the > 4 bolt main block and 4bbl intake. I guess this is possible. Was planning > on placing this in my 71 coupe and taking out the original 302. I guess > my guestion is, is this how you tell the difference between 2bbl and 4bbl > heads on a cleveland? > > Thanks Dean. > |
#7
|
|||
|
|||
Dean wrote:
> Thanks guys for all the info. I know all this,but still can't fiqure out if > the 73 Q code Cobra Jet had 2bbl heads. Dean. ? David Said(incase you missed it): According to Ganahl's book, 351Cs in 73 had open chamber (2V) heads. However they may have varied, the 4V heads have open chambers with the (larger) 4V valves and port sizes. -- David M (dmacchiarolo) http://home.triad.rr.com/redsled T/S 53 sled351 Linux 2.4.18-14 has been up 3 days 10:21 Rob |
#8
|
|||
|
|||
Just a suggestion:
I'm currently building a 351C for my '72 mach 1 and I've decided to go with the "Aussie" heads. They're the best of both worlds, the fuel economy and low-end torque of the 2 bbl heads, but the compression of the 4bbl "Quench" or "closed chamber" heads. I have a feeling this motor's gonna scream!!! (I found my "Aussie" heads on ebay at a pretty fair price). Good luck! -Dave "Dean" > wrote in message ... > Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but > got the engine and trans for $325. When I got the engine home checked the > casting number on the block D2AE-CA this checked out, Intake manifold was > 4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 > in the corners, which means 2bbl heads. So you mean to tell me that > someone removed the 4bbl heads and placed 2bbl heads back on, and left the > 4 bolt main block and 4bbl intake. I guess this is possible. Was planning > on placing this in my 71 coupe and taking out the original 302. I guess > my guestion is, is this how you tell the difference between 2bbl and 4bbl > heads on a cleveland? > > Thanks Dean. > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.794 / Virus Database: 538 - Release Date: 11/10/2004 |
#9
|
|||
|
|||
"trainfan1" > wrote in message ... > Dinsdale wrote: > > > On Fri, 12 Nov 2004 14:50:23 -0500, "Dean" > > > wrote: > > > > > >>Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but > >>got the engine and trans for $325. When I got the engine home checked the > >>casting number on the block D2AE-CA this checked out, Intake manifold was > >>4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 in > >>the corners, which means 2bbl heads. So you mean to tell me that someone > >>removed the 4bbl heads and placed 2bbl heads back on, and left the 4 bolt > >>main block and 4bbl intake. I guess this is possible. Was planning on > >>placing this in my 71 coupe and taking out the original 302. I guess my > >>guestion is, is this how you tell the difference between 2bbl and 4bbl heads > >>on a cleveland? > >> > >> Thanks Dean. > >> > > > > > > That is how you tell the difference...that and the larger port sizes > > on a 4v. > > > > Here's a page with some casting numbers: > > http://home.comcast.net/~jelerath/mu.../heads-fr.html > > > > > > It's been my understanding that 2v heads have more low-end and the 4v > > heads make their power high in the RPM range. > > > > > > Agree, the 4bbl heads are too big for the street, typically. Check your > references - the '73 Q code very well could have the 2bbl heads, which > are huge to begin with, leading into the "smog" motor era... > > Rob Bull****!!! The only people who make this totally absurd statement are those who have NEVER DRIVEN a 351 Cleveland with 4 barrel heads! If you ever get to drive one you will see how silly your statement really is... |
#10
|
|||
|
|||
No!
The 4 barrel Cleveland engines all came with 4 barrel heads from the factory. The 4 barrel heads have larger ports as well as valves, and the came in either open chamber or closed (quench) chamber styles. I have some of both types. All 4 barrel heads have the digit 4 cast on the top corners just outside the valve covers. While All 2 barrel heads have the digit 2 cast on the top corners just outside the valve covers. You CAN NOT determine weather the block is a four bolt main by the casting number. You have to pull the oil pan and visually look at the main caps to tell. My 1971 four bolt main, open chamber 4 barrel heads, Cobra Jet engines casting numbers do not indicate that is what it is, according to any reference sources. My guess is someone swapped the 4 barrel heads for 2 barrel heads, or you have a complete two barrel engine that someone stuck a four barrel intake on it. By The Way: Don't get caught up in this CRAP about the 4 barrel heads not producing torque. There is no lack of torque in a 4 barrel Cleveland. Anyone who has had the pleasure of driving one knows this. :-) "Dean" > wrote in message ... > Thanks guys for all the info. I know all this,but still can't fiqure out if > the 73 Q code Cobra Jet had 2bbl heads. Dean. > "Dean" > wrote in message > ... > > Found a Q code 73 Mach-1 in a salvage yard. Not much left of the car, but > > got the engine and trans for $325. When I got the engine home checked the > > casting number on the block D2AE-CA this checked out, Intake manifold was > > 4bbl spreadbore. All seemed good until I checked the Heads. They had a 2 > > in the corners, which means 2bbl heads. So you mean to tell me that > > someone removed the 4bbl heads and placed 2bbl heads back on, and left the > > 4 bolt main block and 4bbl intake. I guess this is possible. Was planning > > on placing this in my 71 coupe and taking out the original 302. I guess > > my guestion is, is this how you tell the difference between 2bbl and 4bbl > > heads on a cleveland? > > > > Thanks Dean. > > > > |
Thread Tools | |
Display Modes | |
|
|