If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
rec.autos.makers.chrysler FAQ, Part 1/6
Archive-name: autos/chrysler-faq/general/part1
Posting-Frequency: 15 days Last-modified: 2007/6/26 Version: 6 This section is generally revised every 300 days. - - - - - - - - - - - - IMPORTANT. Do not attempt to respond to . Due to spam this address DOES NOT GO ANYWHERE. Instead, go to allpar.com and provide feedback from there. Thank you. - - - - - - - - - - - - * Important Note * Chrysler generally refers to the full Chrysler Corporation (Chrysler, Dodge, Jeep, Plymouth, DeSoto, Eagle, Simca, Rootes Group, Sunbeam, Singer, Hillman, Humber, and AMC). DISCLAIMER: The author and contributors assume no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein. Some of the information is presented as opinion rather than fact. The maintainer does not claim to be an authority. Information below may be reproduced in any way IF credit is given to the writers and maintainer; and it is not published in book or magazine form without the prior written permission of the maintainer; that the maintainer receives, without asking, a FREE copy of the final material; and that no changes are made (except for formatting) without the express permission of the maintainer (David Zatz - contact me via allpar.com). - - - - - - - - - - - - The latest copy may be obtained from http://www.allpar.com/faq.html which links to rtfm.mit.edu - - - - - - - - - - - - CONTENTS Part 1 - Related Resources (groups, Web sites, recall/TSB info) Before You Post, Read This! Frequently Asked Chrysler/Mopar Questions Up and Coming The Newsgroup: charter, notes, rationale Part 2 What should I do... 1. ... before I post? 2. ... if I have problems with Chrysler? 3. ... if I own this car? (list of models and what to look for) Oil Filter Discussion List of All Engines Since 1966 1. Guide to V-8s List of All Body Styles Since 1966 Part 3 Engine Codes Classic Car Troubleshooting Reading codes without a scan tool (computer controlled, carbureted engines) Crankcase inlet air filter, 2.2/2.5 engines. Part 4 Driveability: engine idling, power, mileage, stalling Transmissions Note that this part will be discontinued Part 5 Funny noises Oil leaks Temperature stuff Note that this part will be discontinued Part 6 Troubleshooting (except what is covered by parts 3, 4, and 5) This part will be discontinued Related FAQs: Neon - maintained by the Neon mailing list. ************************************************** ********************** BEFORE POSTING WITH COMPLAINTS/QUESTIONS 1. Check the FAQ. 2. Paranoia, overposting, and thoughtless posts are common. Show off your intelligence and maturity. 3. Do not confuse Chrysler with your dealership, the zone office, or the guy who picks up the phone. 4. If you are having problems with Chrysler or your dealer, read the relevant parts of the FAQ (1, 2) and the Web site. 5. The natural inclination of people who have been mistreated is to respond to many posts. However, all companies sometimes make lemons or fail to treat customers well. Try to restrain anger. ************************************************** ********************** - Related Resources: http://allpar.com/ - major owner/enthusiast site * Models, history, repair, performance info Contact Chrysler via Net - http://www-5.chrysler.com/webselfser...sler/index.jsp Phone Numbers 1-800-992-1997 Chrysler Customer Service - USA 1-800-465-2001 Chrysler Canada 1-800-255-9877 adapting new vehicles for people w/disabilities. 1-800-626-1523 Mopar catalog of manuals, videos, books (free) 1-800-677-5782 local 5-Star Dealer locator Mopar Performance Tech Line: 1-888-528-HEMI. Hours are Monday through Friday, 9 AM to 5 PM ET. Other Resources Plymouth Owners Club (Plymouth & Fargo 25+ years old) 203 Main St., Cavalier, North Dakota 58220 Great magazine! http://www.plymouthbulletin.com/ WPC Restorers' Club (Walter P Chrysler Club) Also a good magazine! http://www.chryslerclub.org/ Chrysler Canada Customer Service: Chrysler Center, P.O. Box 1621 Windsor, Ontario N9A 4H6 Chrysler Europe NV Woluwedal 106-108, 1200 Brussels, Belgium - Europe The Chrysler Historical Foundation, at 12501 Chrysler Freeway, CIMS 410-11-21, Highland Park, MI 48288, can supply you with service manuals, build records, and stock photos for a reasonable fee (1967 or older cars). Other cars, http://www.acarplace.com/ Valiant series, http://www.valiant.org/ PT Cruiser, http://www.ptcruizer.com/ Newsgroups rec.autos.makers.chrysler rec.autos.makers.jeep+willys alt.hi-po.mopars alt.hi-po.mopars.neon alt.autos.dodge.trucks others in rec.autos.* .. wiz.mopar Chrysler was the first make in the rec.autos.makers.* hierarchy, but Volkswagen was the first make to have a Big Seven newsgroup. Chrysler beat both GM and Ford to having a Big Seven newsgroup! ************************************************** ********************** Thanks to Gene Fusco for the Mopar Mailing List's FAQ; thanks also to Lloyd R. Parker, Wayne Toy, Bohdan Bodnar, and Dan Stern. *************************CONTENTS***************** ************ This is divided into corporate and car sections. I. CORPORATE 1. What does DCX mean? DaimlerChrysler DCX is/was DaimlerChrysler's stock symbol. The company will be / was renamed Daimler in summer 2007. The former Chrysler Group will become Chrylser Corporation, LLC, part of Chrysler Holdings, LLC, a privately owned company 80% owned by Cerberus and 20% by Daimler. 2. What is Chrysler's US customer service number? 800-992-1997 3. What is Chrysler's e-mail address? Contact Chrysler via a Web form - see "contact us" on their brand web sites (e.g. dodge.com, chrysler.com, jeep.com). 4. What about the merger / takeover? Chrysler execs got about $60 million in personal profit. Daimler bought Chrysler, doubling their profits, then reportedly siphoned off Chrysler profits via accounting tricks to make Mercedes look more profitable. Daimler spent Chrysler's $8-10 billion war chest. Only one Chrysler rep on the board left from original four. Many plants were sold. Others are being sold. Decontenting to fix Mercedes' losses became noticeable. Chrysler will be transferred to Cerberus, a private equity firm, in summer 2007, with Daimler retaining about 20% of the new Chrysler Holding, LLC. Chrylser Corporation, LLC will be part of Chrysler Holding. 5. What about building cars in China? Chrysler will import Chery cars from China - see http://www.allpar.com/cars/concepts/...china-car.html 7. What's the deal with Chrysler and Mitsubishi? Just after Chrysler phased out the last Mitsubishi engine, Daimler announced that Chrysler would phase out all Chrysler four cylinders in favor of jointly designed fours. The new engine is not a Hyundai or Mitsubishi engine, it's a true joint venture. Details: http://www.allpar.com/mopar/world-engine.html The Avenger/Sebring and Caliber were jointly developed - Chrylser was leading both, though they used newer Mitsubishi basic platforms. (MMC has now decided not to use the mid-sized sedans.) Partnerships with Mitsubishi appear to have ended. You can read about Chrysler's future vehicles at http://www.allpar.com/model/upcoming.html 9. How reliable are Consumer Reports' ratings? See the discussion at http://www.allpar.com/cr.html 10. How can I get help for problems Chrysler won't fix? See the discussion at http://www.allpar.com/trouble.html. Keep trying the Chrysler Customer Center. Know the TSBs. Visit http://www.nhtsa.gov ... keep trying and keep your cool. 11. What's the deal with Chrysler Europe, Simca, and Talbot? Chrysler owned Simca and Rootes until the late 70s, but sales kept going up and down (usually down). Peugeot bought them and sold the Omni as the Talbot. They had Simca/Sunbeam engines (Lloyd Parker). The Centura sold in Australia was a Simca (Dan Stern). See http://www.allpar.com/world/ for many details. These cars and the former Rootes Group brands, such as Singer, Sunbeam, Hillman, and Humber, are covered by http://www.rootes-chrysler.co.uk/ 12. Why are so many Chrysler dealers so awful? Bad contracts. Organizational culture. Incorrect assumptions at all levels. Zone officials who think all customers are whiners and all dealers are honest. Blinders at corporate offices... 13. What is Chrysler doing about it? Five Star program which requires better processes to be in place and does not rely solely on survey ratings helps SOME Chrysler dealers. It seems to be circumvented by less scrupulous dealers with less dedicated zone reps. Overall Five Star worked well for dealers who cared and was probably useless for the less reputable ones. Program appears to not have much corporate traction but we know something will take its place. ******** 14. Should I use high octane gas? Only if your car was designed for it (see your owner's manual) or if you've advanced the timing or your engine is knocking. According to Chrysler and others, many high-octane gasolines have a low driveability index, which can cause long cold start times, warm-up sags, hesitations, and driveway die outs. Under the law, ALL gasolines sold in the US must meet certain standards for detergent; if you really need to "drive your engine clean" get a bottle of Techron or Mopar engine cleaner. Chrysler turbo engines are all designed to use premium. 20. Is X good for my engine? (includes Slick50) The Toyota FAQ (Todd Haverstock) sez: "Independent labs as well as engine manufacturer Briggs and Stratton have rendered a verdict that Slick 50 and similar oil treatments are useless." The Gasoline FAQ says most gasoline additives are useless. Others have weighed in on that score, and DuPont sued to prevent Slick 50 from using Teflon (unsuccessfully). For more details: http://www.tfb.com/sdmc/oil.html 21. Do I have a Chrysler or Mitsubishi (MMC) engine? See part 2. 22. Does the Mini really use a modified Neon engine? Yes, it's a smaller version of the Neon engine designed for European Neons and a small Chrysler that never materialized. The factory was a joint venture with Rover. The supercharged version is quite nice. 23. What does SOHC, SMPI, etc mean? What do I have? Note: No current Chrysler has a distributor or throttle body injection. * DIS means distributorless ignition system. No rotor! * SOHC and DOHC refer to the number of camshafts; one or two. * EFI means electronic fuel injection, such as the following: * TBI - throttle body injection; one or two injectors spray fuel into the air as it heads to the cylinders. * MPI uses one fuel injector for each cylinder. It sprays fuel in the intake manifold, firing at the intake valves. Smoother than TBI, with more power *and* better mileage. * SMPI is sequential multiple-point injection; the injector only fires when the fuel can go straight through the valve and into the cylinder instead of splashing onto a closed valve. * Direct injection sprays fuel directly into each cylinder. This is mainly used in diesel engines (thanks, Michael Turley!) -- Note: all current Chrysler products use DIS and returnless SMPI. Mitsubishi is pioneering direct injection for gas engines. The latest is coil on plug ignition which provides a separate coil for each spark plug, located right on top of the plug, for the best control and spark power. 25. What kind of oil should I use in my four cylinder engine? On February 7, 1995, a Chrysler engineer said 5W30 was best for all four-cylinder non-turbo engines, for winter or year-round in climates such as that of New Jersey. All dealers I surveyed incorrectly recommended and used 10W30! - In 1993 and 1998 Chrysler said 5W30 was best for all its cars. - Dan Stern says synthetic 10W30 is better than natural 5W30. - The benefits of 5W30 or synthetics seem greatest in cold weather when oil is most viscous (before the engine warms). - Even GM recommends 5W30 on their Vortec V8s. - 5W30 was recommended for all years of the 2.0 in most climates. - Hemi uses a different weight than most engines Use Energy Conserving II and SH grades where possible. For my car, recommended oil changes are at 6 months / 7,500 miles. I change it at 6 months or 6,000 miles. GM says many owners do not need to change oil until 10,000 miles! If you are concerned, use synthetic and change at 6,000. ** CHECK YOUR MANUAL **. Dealers often suggest things like changing your antifreeze every three months to get easy money. If you exceed Chrysler's recommendations, do the easy work yourself. PS> Overheating after a an antifreeze change/radiator flushing means your mechanic didn't purge the system correctly. Be careful to thoroughly purge the system of air bubbles - or invest in head gaskets. This is VERY important. AGAIN - Check your owner's manual and don't rely on mechanics, who often rely on out of date memories for their information. If you have a turbo, we recommend synthetic oil. Follow the recommended oil change intervals. GM says many owners do not need to change oil until 10,000 miles! But follow the book, not the 3/3,000 mentality. 26. What kind of engine do I have ??? Raise the hood and check the emissions sticker. You can decode your vehicle ID number (VIN) using most car manuals. The emissions sticker will tell you the displacement of the engine. 27. What is a Mopar? Do I have one? Mopar is slang for a Chrysler-produced car. Some extend it to AMCs and to MMC products (e.g. Colt) sold by Chrysler; some restrict it to high performance only. It is the name of Chrysler's parts division. Mopar stands for MOtor PARts. MoPar is a registered trademark. 28. Which are the Diamond Star models? Diamond Star models are those built by the Diamond Star (DSM) plant in Illinois. This was a joint venture but is now 100% MMC. The Stealth, Colt, Sapparo, Ram 50, and FWD Challenger were re-badged Mitsubishis made in Japan. 29. What are the K-cars? Herb DaSilva: ... Chrysler used the components on the Aries/Reliant (K) in many of its other platforms. These platforms... share similar distance between the wheels on the same axle, and have the same suspension design. Most K variants can swap struts (H is an exception). K derivates include: Laser (pre-88)/Daytona (G), Shadow/Sundance (P), LeBaron/New Yorker (J), LeBaron sedan (pre-90)/Lancer (H), Dynasty/New Yorker/Imperial (C), Acclaim/Spirit/LeBaron sedan (AA). Each derivative has a different wheelbase and floor pan. First-generation minivans are also loosely based on the K. These cars are collectively referred to as EEKs. There is a mailing list for them at http://www.eekcars.com/ 30. How do I find the fault codes stored in my engine computer? See Part 3 of this FAQ. 32. How often should I change my trans fluid? Check your service manual. The severe service definition means that the vehicle is operated *primarily* in one of those conditions. MODERN TRANSMISSIONS WILL BE DESTROYED IF YOU USE THE WRONG FLUID. See http://www.allpar.com/fix/trans.html Even some 3-speed transmissions are NOT compatible with Dexron - read your manual !!! 34. What kind of gas should I use? Use the octane level your owner's manual recommends and the brand you have had good luck with. If your engine knocks adjust the timing. 35. No longer relevant; deleted. 36. What about lemons? To quote the rec.autos FAQ -- every auto manufacturer has manufactured a lemon or two; even Honda admits to this. Please don't waste everyone's time by announcing to the world that your `brand x' automobile is terrible, so all brand x automobiles are terrible, so no one should ever buy a car from the brand x company. Such articles are worse than useless, because they cause wasted bandwidth while carrying little or no useful information. 37. Are K&N filters worth it? David Cooley reported on a magazine test of aftermarket air filters. The paper filters were respectable, but the K&N and Accell filters flowed almost 3 times as much air when dirty as clean paper filters of the same size. The K&N passed less particulate matter than the paper filter; as it got dirtier outside, they sprayed on a new coat of oil (without cleaning) and found it filtered even better. K&N filters change your engine sound, rarely need replacement, and flow better when dirty. Other than that, you may not notice much difference unless you have a high-efficiency exhaust and performance engine. There has been debate over the actual filtering ability of these filters; the power boost on TBI cars is negligible. So. . .probably not. 38. Is there anything special I should do if I have ABS? Marv Miller suggests replacing brake fluid every 2-4 years regardless of car make. Use only the brake fluid the car maker recommends!!! Fully depressurize the system before adding or changing brake fluids. Note - ABS is now far more reliable than it used to be. The primary source of failure is dirt in the sensors, which can easily be cleaned. 39. What kind of transmission fluid should I use? Is Dexron OK? Use ONLY what it says in your owner's manual to use. Many Chrysler transmissions are NOT compatible with standard fluid! ATF+3 is usually the best one to use with automatic transmissions before 2001, ATF+4 after. THIS IS AN IMPORTANT and very misunderstood issue. You should really visit http://www.allpar.com/fix/trans.html if you have a four-speed or five-speed Chrysler automatic. Even most three-speed automatics are required to use ATF+4. 40. Are Chrysler transmissions still junk? Not if you use the right transmission fluid. By the way, the 545 is actually based on the old, reliable 727. See #39 and Part 2 of the FAQ. 42. Aren't Chryslers junk? / Has Mercedes improved Chrysler quality? Chrysler was working on quality before the takeover, yielding the PT Cruiser - which is beating the Honda Civic on quality surveys - and the Jeep Liberty, which is also doing very well. Chrysler has been making great strides in quality. Mercedes, if anything, damaged those efforts by emphasizing an "expert" approach rather than a Toyota-style inclusive/participatory approach to quality. Look at Mercedes' quality reports, then at Chrysler's. Generally, Chrysler quality TROUNCES Mercedes. So how did Mercedes help? 43. Engine sludge - what's the deal? Early 2.7 liter engines in some models had a more than normal occurence of oil degredation resulting in a thick substance called "sludge" which can cause major engine damage. This problem also afflected some Toyotas, Hondas, and other makes. If you have a 2.7 made before 2004, you may want to use synthetic oil (which can also lengthen your oil change intervals). This is rare but nasty. The problem appears to have been resolved as of 2005. 86. All other questions. Check the computer codes or replace the ballast resistor (if you have one!). ******************* UP AND COMING ****************** This section has been replaced by http://www.allpar.com/news/ and http://www.allpar.com/model/upcoming.html Dual-clutch, automatically shifted manual transmission to increase acceleration AND gas mileage: http://www.allpar.com/corporate/auto...nsmission.html Brand new line of V6 engines with state of the art gadgets: http://www.allpar.com/mopar/phoenix-engines.html Hemi upgrades: http://www.allpar.com/mopar/new-mopar-hemi.html Big changes to the Ram? http://www.allpar.com/model/ram/2009-ram.html And of course the new minivans! http://www.allpar.com/model/m/2008-minivans.html *********************** AUTOMATIC TRANS FLUID ********************** Many people have destroyed their transmissions by using the wrong fluid. Some people have had bad transmission problems go away when they changed the fluid. Follow Chrysler's recommendations. Ignore the alternative fluid (as in "if Mopar is unavailable, use..."). See http://www.allpar.com/fix/trans.html for details. Note that this is also true of Toyotas (as per http://www.toyoland.com ) *********************** NEWSGROUP CHARTER *********** (This section never changes. The newsgroup was created around 1994.) - The Newsgroup Rec.Autos.Makers.Chrysler -- CHARTER COVERAGE. Rec.autos.makers.chrysler was set up to cover issues related to cars and trucks made by Dodge, Plymouth, Chrysler, Fargo, DeSoto, Jeep, Eagle, and all other makes sold or marketed by Chrysler Corp. BEHAVIOR. Political comments and commercial advertising will be discouraged. However, *short* product announcements, preferably restricted to the name, availability, and a very brief description of the product's function (where applicable) are acceptable. Discussion of whether Chrysler products are of good or bad quality, lengthy comparisons to Hondas or other cars, and similar arguments and flamewars with no foreseeable conclusion are heavily discouraged. Participants are asked to be kind, considerate, and supportive, and to generally keep an open, warm atmosphere so that the function of this newsgroup may be maintained. RATIONALE. This group is proposed to help Chrysler (CC) vehicle owners to support each other, save money, and maximize enjoyment of their autos. As in rec.autos.vw, Chrysler owners need a forum where they feel unreservedly welcomed, and where they can obtain esoteric information from involved people with similar experiences and vehicles. This newsgroup should be general enough for those who know little about cars to get a broad range of information and advise from, while allowing those more into the products to exchange their views and advice. In a world dominated by GM, Ford, and VW (Europe) products, Chrysler owners often find discussions difficult. Most aftermarket parts and advice are for GM and Ford owners; knowledge about Chrysler is hard to find. The press don't cover CC as well as they could -- and CC's dissemination of information to the press and the public is poor. Chrysler products have quirks which most mechanics don't seem to be aware of, leading them to replace transmissions when the fault is in a 20 cent vacuum hose, or to replace the engine computer instead of plugging in a hose or changing a sensor. Chryslers are often seen as ordinary American cars (unlike makes which many mechanics will admit they are not familiar with) -- but what will work on a GM or Ford will often not work on a Dodge. There is a vast ocean of experience in Chrysler products out on the Internet which may help owners to save time, money, and trouble. CC vehicles are common enough, yet idiosyncratic enough, to deserve their own place in the Net hierarchy -- just as Volkswagens are. In addition, it is important for CC vehicle owners to have a place to discuss the problems and benefits of ownership, to exchange detailed information and personal experiences, in a supportive and positive atmosphere. In short, I hope to develop a group as vibrant and helpful as the Mopar mailing list or the rec.autos.VW group have been, while making this group accessible to all Dodge, Plymouth, Jeep, Eagle, and Chrysler owners, even those who don't know what a Mopar is. FAQ maintained by David Zatz who works at http://www.toolpack.com/ (end of FAQ part 1) |
Ads |
#2
|
|||
|
|||
rec.autos.makers.chrysler FAQ, Part 2/6
Archive-name: autos/chrysler-faq/general/part2
Posting-Frequency: 15 days Last-modified: 2006/7/13 Version: 4.8 This section is generally revised every 300 days. SERIOUS updates to the body code list, July 2005. IMPORTANT. Do not attempt to respond to . Due to spam this address DOES NOT GO ANYWHERE. Instead, use the form at http://www.allpar.com/i/form.html Thank you. - - - - - - - - - - - - DISCLAIMER: While every effort has been taken to insure the accuracy of the information contained in this FAQ list compilation, the author and contributors assume no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein. Some of the information is presented as opinion rather than fact. The writers and the maintainer do not claim to be authorities. information below may be reproduced in any way IF credit is given to the writers and maintainer; and that it is not published in book or magazine form without the prior written permission of the maintainer; that the maintainer receives, without asking, a FREE copy of the final material; and that no changes are made (except for formatting) without the express permission of the maintainer (David Zatz of allpar.com). - - - - - - - - - - - - If you did not obtain this FAQ from one of its newsgroups or from the rtfm.mit.edu archives, it is probably NOT current. The latest copy may be obtained from http://www.allpar.com/faq.html - - - - - - - - - - - - PART II *************************CONTENTS***************** ************ What should I do... 1. ... before I post? 2. ... (removed) 3. ... if I have problems with Chrysler? 4. ... if I own this car? (list of models and what to look for) Oil Filter Discussion List of All Engines Since 1966 1. Guide to V-8s 2. New transmission designations decoded (new!) List of All Body Styles Since 1966 ************************************************** ********************* BEFORE POSTING WITH COMPLAINTS/QUESTIONS 1. Check the FAQ. Most answers are there. 2. Please don't post messages like "this broke and I will speak to the dealer about it sometime." Go to the dealer first; if they cannot fix it, and it is not in the FAQ, THEN go to the newsgroup. 3. If you are having problems with Chrysler, and have not yet read the relevant FAQ section, please do so. At least call them (800-992-1997). 4. If you are having problems with Chrysler and are angry and bitter at them, an angry message or two is fine. But you won't help anyone by going overboard. ************************************************** ********************* HOW TO DEAL WITH CHRYSLER CORP. ************************************************** ********************* (Note: Thanks to Dan Adams for his help with parts of this - Chrysler Corp should be grateful to have him!) * The order in which you should deal with a problem is something like this: 1. Speak politely but assertively with the service writer. 2. Ask to go for a ride with the mechanic and discuss relevant issues wuth them. 3. Service manager. 4. 800 992 1997. 5. Zone (voluntary buyback negotiations IF APPLICABLE) 6. Arbitration / Consumer Affairs / Attorney General if applicable AND needed. * Be *polite* and *calm* but assertive at all times. Do not take "no" for an answer but do *not* act angry or make threats. Chrysler sometimes helps, even out of warranty, but they need to be gently pushed; they are generally defensive; and they have a strange impression that all dealers are wonderful and honest while most customers are scum. The Customer Center reps often don't know what they're talking about, so elaboration may help; they are not car people or particularly well paid. If all else fails, call back and speak to someone else. Always take down their name for your reference! * Know what you're talking about. Check the FAQ, TSBs, your computer codes, and recalls before you visit the dealer with a problem. * Don't expect Chrysler to change something because it's listed in a TSB (technical service bulletin). TSBs describe solutions to problems which may not apply to your car; they are *not* recalls, though Chrysler often fixes cars out of warranty if there is a known problem and TSB on it. * Even if you are in an adversarial relationship, act in a friendly, nonthreatening, non-adversarial manner. It works better and makes both parties less angry. * Daniel Adams writes: Chrysler corparte headquarters does tend to back the field reps but a good service writer can get to them and help you more than you would believe. Don't take your frustration out on the service writers, they carry quite a bit of pull behind the scenes. [And sometimes it helps to know who the good service writers are.] * Don't take "no" for an answer. Call Chrysler at 800-992-1997 from a pay phone if you have to. They will call the dealer. Often, the dealer will discover they don't need to charge you or keep your car after all! * If your dealer keeps fixing the same thing over and over again, get another dealer. Or try the newsgroup. * If your dealer treats you badly, lies to you, refuses to do the work, etc., get another dealer. * Consider service BEFORE buying the car when you choose a dealer. Also consider asking the salesman who the best service writer is. * If you have a continuing problem, speak to the people at the Customer Center. You may need to deal with a zone rep, the final word at Chrysler. Others can overrule them but THEY (generally) WILL NOT. Some reps are good. Others are useless. There have been many reports that the reps in some areas are exceedingly sensitive and need to be handled with kid gloves. (See message about service writers above -- they can often get action where ordinary mortals cannot). * Note: if, as Continental Auto Body (of Wyckoff, New Jersey) did to my car, your dealer should get your car into an accident, immediatly retain a lawyer and find out what your options are. Examine the damage personally before they have a chance to cover it up and lie about it. ****** NON-CHRYSLER SOLUTIONS ****** (after internal solutions fail) courtesy of http://www.acarplace.com/ * Contact your local consumer affairs department. Note: May not work in states with a predominantly anti-government/libertarian attitude. 1. File an official lemon law complaint with your state. This will get their attention and help negotiation. You can usually get a better deal through negotiation than in court. Hiring a lemon law specialist may help - good ones will offer to negotiate *first.* Chrysler has a reputation for being easy! 2. Go through the Customer Arbitration Board. Results with this group have been mixed. * Most lawyers don't know the first thing about lemon law! A good one will know the people at the zone office and will try to talk nice to them to solve the problem. If negotiation is not their first move, they are not the right lawyer. * Your chances of getting cash are slim. You will probably get a credit (buy-back). You will usually not get all of your money back. Chrysler tends to follow state laws; most impose a penalty on each mile of use before the first lemon-type complaint. This is normal and OK. * Go through the latest TSBs again. Something new might have come up. *Whenever your dealer lies to you or is too incompetent, send a letter to Dealer Agreements or the Customer Center, Box 302, Centerline, MI 48015. It may not help you but it might help someone else! (Actually, it may not help anyone else, either). * If in a dispute with a five-star dealer, feel free to return your customer satisfaction survey with very negative ratings. Dan Adams assures us that these surveys are taken very seriously. Be aware that all surveys are also given to the dealers - not just in aggregate form, but the individual surveys - so be careful what you say, don't go overboard. For more details on what happens to your surveys, see http://www.allpar.com/fix/surveys.html. * If you get into a dispute with an auto body shop, check your state's laws to see what regulations and rules might be applicable. ************************************************** ********************** WHAT SHOULD I DO IF I HAVE THE FOLLOWING CAR/ENGINE? ENGINES 2.2/2.5 turbo: -- check for fuel leaks and loose fuel line connections Carbureted V-8/slant six engines -- clean the crankcase inlet air filter regularly. -- keep a spare ballast resistor in your glove compartment -- make sure the stove and damper (vacuum-powered valve) are working -- check/replace vacuum tubes regularly -- make sure float level is adjusted well Any engine without DIS (if you have a rotor, this applies to you) --- -- Problems may be caused by low quality rotor or different brand rotor and distributor cap. (Standard-Bluestreak was recommended by Dan Stern. There have been malformed Mopar 2.2/2.5 caps). -- We've seen an aftermarket cap replacement that allows for use of conventional, longer-life wires. 2.7 V6, pre-2006: use synthetic oil to avoid sludge and maintain the PCV system TRANSMISSIONS 4-speed automatic -- 1989-94: watch for early failure and press Chrysler to pay for repairs. -- all: Change fluid regularly with *recommended* fluid. See http://www.allpar.com/fix/trans.html -- KNOW the right fluid (owner's manual ONLY). Do NOT trust mechanics. -- DO NOT use non-recommended fluid or ANY additives. -- Check for TSBs and have the computer updated if needed. If a dealer doesn't feel/hear it, find another. Persist until they follow the TSB. The new computer save wear and tear on the transmission for various reasons. (1996+ transmissions have software-upgradable computers) -- MOST problems are due to MAINTENANCE ISSUES. Do the maintenance with EXACTLY the fluids and parts recommended! -- Chrysler has informally extended some transmission warranties due to earlier problems. -- DO NOT USE DEXRON! Do not trust any mechanic! ASK! -- If you have a problem, check the allpar forums and try getting second opinions. Mechanics, including dealership mechanics, are quick to demand that you replace or rebuilt these things even when the problems are minor! Even honest mechanics are jaded by past breakdowns... -- If you DO have a problem, make SURE the first thing they check is the computer error code. Most problems appear to be sensor issues rather than mechanical breakdowns. That's the difference between $100 and $2500! 5-speed manual transmission, pre-1994 (non-MMC): -- Seepage from the transaxle is common. BRAKES ABS -- You may be able to prevent problems with ABS systems by changing the brake fluid every 4 years (or more). -- Often, the ABS light goes on due to dirt in the sensors. Try to troubleshoot it yourself using the engine-code method. http://www.allpar.com/fix/codes.html CARS Neon -- see the Neon FAQ. -- whining noise from the computer for 3-4 minutes after the engine is shut, periodically, is normal. -- bad head gaskets: fixed with mid-1997 upgrade. -- Other Neon issues - see http://www.allpar.com/neon/neon.html PAINT COLORS Metallic paints are more prone to problems. Blue seems to be more prone to problems. Red is known for fading and peeling. Paint seems to have improved markedly since the 1990s. Note: this applies to all brands of cars and trucks. ******************* CONSUMER REPORTS DISCUSSIONS ******************* Transferred to Web site, http://www.allpar.com/cr.html ************************************************** ********* From Lloyd Parker, updated since then: **** Engines used in Chryslers since 1966: Lots of info on most of these engines is at http://www.allpar.com/mopar.html * denotes an engine still in production for Chrysler vehicles (some are still used elsewhere, e.g. 2.2 in China, 2.4 in Russia) 4 cylinders 1.4 (MMC) -- Colt, Champ 1.4 (CC/Rover) - BMW Mini 1.5 (Sunbeam) -- Cricket (British) 1.5 (MMC) -- Colt, Summit 1.6 (MMC) -- Colt, Champ, Challenger, Sapporo, Arrow 1.6 (Peugeot) -- Omni, 024, Charger, Horizon, TC3, Turismo 1.6 turbo (MMC) -- Colt 1.6 DOHC (MMC) -- Colt, Summit 1.6 DOHC turbo (MMC) -- Colt 1.6 (CC/Rover) - Mini and export Neons 1.7 (VW) -- Omni, 024, Charger, Horizon, TC3, Turismo 1.8 (MMC) -- Colt, Vista, Summit, Laser, Talon 1.8 (CC)* -- Neons outside the US 1.8 (WE)* -- World Engine - Caliber, more (2006+) 2.0 (MMC) -- Arrow, Vista 2.0 DOHC (MMC) -- Laser, Talon 2.0 DOHC turbo (MMC) -- Laser, Talon 2.0 SOHC * -- Neon 2.0 DOHC * -- Neon, Sebring, Avenger, Talon, Stratus/Cirrus/Breeze 2.0 (WE)* -- World Engine - Caliber, more (2006+) 2.2 -- Omni, 024, Charger, Horizon, TC3, Turismo, Aries, Lancer, Reliant, Shadow, Sundance, 400, 600, Caravelle, Caravan, Voyager, LeBaron, Laser, Daytona, New Yorker, E-Class, Executive, Limousine (note: TBI and carb versions) 2.2 turbo -- LeBaron, New Yorker, Limousine, Laser, Daytona, Lancer, TC, 600, Shadow, Caravelle, Sundance, Omni, Charger, E-Class, Shelby (note: MPI) 2.2 DOHC turbo -- Spirit, Daytona (joint venture with Lotus) 2.2 DOHC turbo -- TC (joint venture with Maserati) 2.2 (Renault) -- Medallion 2.4 (MMC) -- Vista, Summit 2.4* DOHC (CC) -- Cirrus/Stratus/Breeze, 1996+ minivans, PT 2.4 Turbo (CC) - PT GT, SRT-4, Mexican Stratus R/T 2.4 (WE)* -- World Engine - Caliber, Compass, Patriot, more (2006+) 2.5 (CC) -- minivans, Aries, Reliant, Shadow, Sundance, Duster, 600, Lancer, Dynasty, Daytona, Spirit, Acclaim, LeBaron, Caravelle, Dakota (to 1995) - no carb versions 2.5 turbo (CC) -- minivans, Spirit, Acclaim, Shadow, Sundance, LeBaron, Daytona (Note: MPI) 2.5 (AMC) -- Wrangler, Cherokee, Premier, Dakota (96+) 2.6 (MMC) -- New Yorker, E-Class, Executive, Limousine, LeBaron, 400, 600, Aries, Reliant, Caravan, Voyager 2.6 turbo (MMC) -- Conquest (MMC) [Coming up - Hyundai engine tweaked by Mitsubishi and Chrysler for use in all three lines] 2.5 is 2.2 with balance shafts, minor changes. 2.0 (CC) is 2.2 with different heads, fuel system, some tweaks. 3.9 V-6 (below) based on 318. 2.4 is 2.0 with balance shafts, other minor changes. Chrysler families: 2.2/2.5, 2.0/2.4 ---------------------------------- V-6: 2.5* (MMC) -- Sebring, Avenger, Cirrus, Stratus (based on 3.0) 2.7* LH series (1998-2001), Stratus/Sebring 3.0 (MMC) -- LeBaron, TC, minivans, New Yorker, Spirit, Dynasty, Daytona, Stealth, Shadow ES, Acclaim, Duster 3.0 (Renault) -- Premier, Monaco 3.2 LH series (1998+) 3.3* New Yorker, Dynasty, LH series, minivans 3.5* LH series (1998+), Prowler (steel and aluminum versions) - Chrysler considers the aluminum version to be entirely new 3.7* V-6 for trucks (2002+) 3.8* New Yorker Fifth Avenue, Imperial, minivans - bored 3.3 3.8* Wrangler, 2007 Pacifica, others - enlarged 3.5 3.9 trucks (3.9 is based on the 318) 4.0 enlarged, modified version of the 3.8 Chrysler-made V6 families are 2.7/3.2, 3.3/3.5/3.8, 3.9/318 MMC 2.5 and 3.0 are related Coming in 2009: Phoenix V6 engines (see http://www.allpar.com/mopar/phoenix-engines.html ) ---------------------------------- The SLANT SIX (share basic design) 2.8 (170) -- Dart, Valiant, Lancer, Barracuda (Canada), A100, D100 3.3 (198) -- Barracuda, Challenger, Dart, Valiant, Duster, Scamp 3.7 (225)-- Polara, Monaco, Coronet, Charger, Mirada, Diplomat, St. Regis, Challenger, Dart, Aspen, Fury, Belvedere, Satellite, Barracuda, Valiant, Duster, Scamp, Volare, Lancer ---------------------------------- STRAIGHT SIXES (flat head) - various sizes - ended in late 1950s for cars 215 - Australian Valiants 245 - Australian Valiants 265 - Australian Valiants 4.0* (AMC) -- Cherokee, Wagoneer, Wrangler, Grand Cherokee 4.2 (AMC) -- Wrangler Families: 215/245/265, 4.0/4.2, flat heads The Australian straight sixes was built on a basic design intended for use in American trucks. They changed from the slant six to Australian-built 215, 245, and 265 sixes in 1970. The Aussie models had hemispherical heads, so the 3-2barrel Weber version could honestly be called a Hemi Six-Pack. ---------------------------------- V-8s 4.5 (273) -- Dart, Valiant, Barracuda, Coronet, Belvedere, Satellite 4.7* -- 1999 Grand Cherokee, Charger R/T (CNG), next-gen Rams 5.2 (318) -- Polara, Monaco, Coronet, Charger, St. Regis, Magnum, Mirada, Challenger, Dart, Aspen, Fury, VIP, Belvedere, Satellite, Road Runner, Barracuda, Valiant, Scamp, Duster, Volare, Cordoba, LeBaron, Newport, New Yorker, Gran Fury, Imperial, Grand Cherokee, Grand Wagoneer, Diplomat, Demon, pickups and SUVs thru 2001. 5.6 (340) -- Charger, Challenger, Dart, Barracuda, Duster, Road Runner, Ramcharger 5.7 Hemi (345) -- Pickups, LX cars, Grand Cherokee, Durango 5.9 (360) -- LeBaron, Newport, New Yorker, 300, Cordoba, Diplomat, Polara, Monaco, Challenger, Dart, Aspen, Fury, Gran Fury, Barracuda, Duster, St. Regis, pickups and SUVs thru 2002. (345) -- Hemi Magnum engine for trucks, next-gen large cars 5.9 (361) -- Coronet, Charger, Belvedere 5.9 (360-AMC) -- Grand Wagoneer 6.1 Hemi - SRT8 models 6.3 (383)-- Newport, 300, Town & Country, Polara, Monaco, Coronet, Charger, Challenger, Dart, Fury, Belvedere, Satellite, Road Runner, Barracuda, Magnum 6.6 (400) -- Newport, New Yorker, Town & Country, Monaco, Fury, Road Runner, Gran Fury, Charger, maybe Cordoba, Magnum 7.0 (426, Hemi & Wedge) -- Belvedere, Road Runner, GTX, Barracuda, Challenger, Charger, Coronet, Daytona, Superbird 7.2 (440) -- Newport, New Yorker, 300, Town & Country, Imperial, Polara, Monaco, Coronet, Charger, Challenger, Fury, VIP, Belvedere, Road Runner, GTX, Barracuda, Daytona, Superbird ---------------------------------- 8.0 V-10* -- Viper, Ram trucks (two versions, fairly different) Truck version (cast iron) ended in 2002. Aluminum continues. ---------------------------------- Gary Howell clarifies: ** Small blocks (except new 4.7) ** 273/318/340/360 are LA engines they look the same from the outside. LA stands for "Lightweight-casting A" [There is now an A/LA page at http://www.allpar.com/mopar/318.html] 273 cu. in. 1964-69 3.31 stroke and 3.63 bore 318 cu. in. 1968-91 3.31 stroke and 3.91 bore 340 cu. in. 1968-73 3.31 stroke and 4.04 bore 360 cu. in. 1971-91 3.58 stroke and 4.00 bore The A engines (not LA) are older small blocks and look the same on the outside to each other. The blocks are different in deck height, but share some internal components with the LA block. The cylinder heads and intake are different. 277 cu. in. 1956 3.75 bore and 3.12 stroke 301 cu. in. 1957 3.91 bore and 3.12 stroke 318 cu. in. 1957-67 3.91 bore and 3.31 stroke The Magnum 318 and 360 engines are LA engines with different cylnder heads. The blocks are physically the same as the earier LA engines, except the oil passage for the shaft mounted rockers is not drilled, because the Magnum engines oil through the push rods. The boss is there if you need to use the old style heads. ** Big Blocks ** There are eight different big blocks. The B blocks are short deck and the RBs are tall deck. The RBs require a wider intake manifold. [RB engine page: http://www.allpar.com/mopar/383.html] B: 350, 361, 383, 400 RB: 383, 413, 426 Wedge (not Hemi), 440 All B engine use 3.38 stroke crank with different bores, and all RB engines use 3.75 stroke crank with different bores. You'll notice that the 383 is listed in two differnent places. There were two different 383s; the RB is very rare, only produced 64. The 350 was only produced in 1958. ************************************************** ********* NEW TRANSMISSION DESIGNATIONS (Courtesy Daniel Adams) On the new transmissions (e.g. 41TE): 4 amount of forward gears (from 3 to 6 at this point!) 1 the torque rating for the trans (on a 1-8 scale 1 lowest 8 strongest) T or R transaxle or rear wheel drive e or h electronic or hydraulic There are two five-speed automatics: a Chrysler-designed unit based on the 727, and a Mercedes-designed unit 62TE six-speed automatic is similar to the four-speed car automatics and actually has seven forward speeds including a kickdown gear. Truck automatics are generally 727-based (unlike minivan autos.) Transmission list with details on many types of transmission: http://www.allpar.com/mopar/transmissions.html Dual clutch automatics: http://www.allpar.com/corporate/auto...nsmission.html ************************************************** ********* CAR BODY TYPES Because the list of car body types was getting rather confusing - there are far too many models that jumped from one platform to another - we have taken this out of the FAQ and refer you instead to full, informative lists of cars by body type at: http://www.allpar.com/model/rwdbodies.html (rear drive and trucks/Jeeps) http://www.allpar.com/model/fwdbodies.html (front drive). For an example of the difficulty, the early Barracuda was a modified Valiant, hence an A-body; later it moved to a platform shared only with the Challenger (E-body). The New Yorker was a K-car, C-body, and several more...in one year sharing two different bodies (not unlike the Stratus whose sedan and coupe versions were built on totally different platforms, made by two different companies, in the same years!). The Fury moved from C to B body in the late 1970s. There are many others... cars were resized, transformed, dropped, and brought back with the same names. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 2 | January 2nd 07 05:27 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 4 | May 23rd 06 05:24 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 5 | December 19th 05 05:36 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 3 | December 4th 05 05:29 AM |
rec.autos.makers.chrysler FAQ, Part 1/6 | Dr. David Zatz | Chrysler | 10 | October 16th 04 05:28 AM |