A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Jeep
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

97XJ Dana 30 Ball Joint remove/replace



 
 
Thread Tools Display Modes
  #1  
Old June 20th 07, 07:48 PM posted to rec.autos.makers.jeep+willys
[email protected]
external usenet poster
 
Posts: 18
Default 97XJ Dana 30 Ball Joint remove/replace

OK...Replacing the passenger side knuckle & balljoints. I know I need
a ball joint service kit to make life easy, and not damage anything
else. With Harbor Freight being the closest place that has these
kits, thought I'd poll the folks here and see which kit (38335-0VGA
or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
ball joint & tie rod separator work as well?

Thanks,
E
Ads
  #2  
Old June 20th 07, 09:23 PM posted to rec.autos.makers.jeep+willys
L.W. \(Bill\) Hughes III
external usenet poster
 
Posts: 3,245
Default 97XJ Dana 30 Ball Joint remove/replace

Harbor Freight is the last place I would go for tools.
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
http://www.billhughes.com/


> wrote in message
...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E




--
Posted via a free Usenet account from http://www.teranews.com

  #3  
Old June 20th 07, 10:32 PM posted to rec.autos.makers.jeep+willys
Sam Simian
external usenet poster
 
Posts: 38
Default 97XJ Dana 30 Ball Joint remove/replace

On Wed, 20 Jun 2007 13:23:47 -0700, L.W. (L.W.) Hughes III wrote:

> I use a "C" clamp and a fork


I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.

Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.










  #4  
Old June 20th 07, 10:38 PM posted to rec.autos.makers.jeep+willys
L.W. \(Bill\) Hughes III
external usenet poster
 
Posts: 3,245
Default 97XJ Dana 30 Ball Joint remove/replace

This from the biggest loser of them all! The jealous, really jealous, I
can't believe how jealous this little draft dodging coward schizophrenic
psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
24.86.24.251 who's only way to get attention is to make
a fool of it's self. With an obsession with perverts and goats, where it
writes via remailers, and cross posts to other perverts to no one's
surprise. With extreme jealous ranting over my documents, possessions,
successes, manliness and super Southern California surfing body, beard, and
loving family. Committing forgery over many of them proving I'm a
responsible American man. You remind me of a little rat dog, like a Mexican
Chiwawa with it's senseless barking, me too, me too. You're even more senile
than I first thought. And the poor thing, you're too girlie to take
responsibility for yourself again, by signing your statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using schizophrenic psychopath
forged up names???????
You're not worth any more time when a cut and paste this same paragraph
it fits so well!
But, now worth a forwarding to:
,
, , , ,

God Bless America, Bill O|||||||O
http://www.billhughes.com/


"Sam Simian" > wrote in message
news:k1hei.42756$1i1.4043@pd7urf3no...
>
> I'm not surprised at all, but I really don't wanna know the details of how
> exactly you use it. Well, whatever turns you on, I suppose.
>
> Just don't use your utensils of mass-disgustion on any of those poor
> monkeys you suddenly have the hots for.




--
Posted via a free Usenet account from http://www.teranews.com

  #6  
Old June 21st 07, 12:17 AM posted to rec.autos.makers.jeep+willys
24BitŪ
external usenet poster
 
Posts: 20,314
Default 97XJ Dana 30 Ball Joint remove/replace

On Wed, 20 Jun 2007 13:23:47 -0700, "L.W. \(Bill\) Hughes III"
> Amazingly Replied without Prejudice below:

You can't even take a **** without help!

:> Harbor Freight is the last place I would go for tools.
:> I use a "C" clamp and a fork:
:>http://members.citynet.net/trailjeep/balljoint.html
http://www.billhughes.com/
:>
:>

Pirated Software & Troll

Of course I was trolling when I wrote those words. "L.W.(Troll Boy) Hughes
III"

You know I've never lied. And I don't use foul language, as that
and cross posting are how I've close many of these anonymous coward's
IPs.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


I saw my Doctor using a recorder, and asked about the program,
Dragon Naturally Speaking and he gave me a copy, it works as advertised,
a novelty that gets old.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


I have Auto Cad, too. BFD.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


They were bought and pay for, over four thousand for my Auto Cad,
just not by me.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Fraudulent Tax Reporting

My bills of sales are boxed in the year they were entered into my
tax receipts, It would take hours to go though this year's receipts, let
alone going back ten years. Of course you never making enough to pay
taxes, you wouldn't know about that.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

He calls upon the Lord, who hears him not:

You know I can relate to Jesus, as I've only done good, yet these
little low lifes persist in persecuting me. Pray for them as they know not
what they do.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

LIAR

We don't take wimps like you. Some of our training:
http://video.google.com/videoplay?do...hine+gun&hl=en
God Bless America, Bill O|||||||O
http://www.billhughes.com/

It's not required, it's just fun to shoot seven hundred and fifty
bucks a minute. I'd ask what you train with, but you being a felon, you
may not own a firearm, nor vote.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


But we talked. Jesus and me, and we decided to make this group a
crusade, and spread the holy word of our Father.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Like Jesus, I write only the truth.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


I'm happy living my life, for my Lord, Jesus. You can hang with
the perverts for all I care.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Wrong Again Fool!

That means you're inbred Cajun. I have no french in my ancestry:
http://www.genealogy.com/users/h/u/g.../0004tree.html
God Bless America, Bill 0|||||||0
http://www.billhughes.com/

Can't Spell

That is a fact, I'm never wrong, except in spelling and grammar which
have never been important to me.
God Bless America, Bill 0|||||||0
http://www.billhughes.com/

Is a Homo

I am a homosexual. period!
God Bless America, Bill O|||||||O
http://www.billhughes.com/


L.W.(Bill) Hughes III replied in message :

Like, you know you've ever sucked a sweater dick than mine?
God Bless America, Bill O|||||||O


Bigot

My parent taught me to be truthful and to take responsibility for
myself
and family.
I may be a bigot as I hate Japanese products.
God Bless America, Bill 0|||||||0
http://www.billhughes.com/
  #7  
Old June 21st 07, 12:17 AM posted to rec.autos.makers.jeep+willys
24BitŪ
external usenet poster
 
Posts: 20,314
Default 97XJ Dana 30 Ball Joint remove/replace

On Wed, 20 Jun 2007 14:38:47 -0700, "L.W. \(Bill\) Hughes III"
> Amazingly Replied without Prejudice below:


Pirated Software & Troll

Of course I was trolling when I wrote those words. "L.W.(Troll Boy) Hughes
III"

You know I've never lied. And I don't use foul language, as that
and cross posting are how I've close many of these anonymous coward's
IPs.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


I saw my Doctor using a recorder, and asked about the program,
Dragon Naturally Speaking and he gave me a copy, it works as advertised,
a novelty that gets old.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


I have Auto Cad, too. BFD.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


They were bought and pay for, over four thousand for my Auto Cad,
just not by me.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Fraudulent Tax Reporting

My bills of sales are boxed in the year they were entered into my
tax receipts, It would take hours to go though this year's receipts, let
alone going back ten years. Of course you never making enough to pay
taxes, you wouldn't know about that.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

He calls upon the Lord, who hears him not:

You know I can relate to Jesus, as I've only done good, yet these
little low lifes persist in persecuting me. Pray for them as they know not
what they do.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

LIAR

We don't take wimps like you. Some of our training:
http://video.google.com/videoplay?do...hine+gun&hl=en
God Bless America, Bill O|||||||O
http://www.billhughes.com/

It's not required, it's just fun to shoot seven hundred and fifty
bucks a minute. I'd ask what you train with, but you being a felon, you
may not own a firearm, nor vote.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


But we talked. Jesus and me, and we decided to make this group a
crusade, and spread the holy word of our Father.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Like Jesus, I write only the truth.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


I'm happy living my life, for my Lord, Jesus. You can hang with
the perverts for all I care.
God Bless America, Bill O|||||||O
http://www.billhughes.com/

Wrong Again Fool!

That means you're inbred Cajun. I have no french in my ancestry:
http://www.genealogy.com/users/h/u/g.../0004tree.html
God Bless America, Bill 0|||||||0
http://www.billhughes.com/

Can't Spell

That is a fact, I'm never wrong, except in spelling and grammar which
have never been important to me.
God Bless America, Bill 0|||||||0
http://www.billhughes.com/

Is a Homo

I am a homosexual. period!
God Bless America, Bill O|||||||O
http://www.billhughes.com/


L.W.(Bill) Hughes III replied in message :

Like, you know you've ever sucked a sweater dick than mine?
God Bless America, Bill O|||||||O


Bigot

My parent taught me to be truthful and to take responsibility for
myself
and family.
I may be a bigot as I hate Japanese products.
God Bless America, Bill 0|||||||0
http://www.billhughes.com/

:> This from the biggest loser of them all! The jealous, really jealous, I
:>can't believe how jealous this little draft dodging coward schizophrenic
:>psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
:>24.86.24.251 who's only way to get attention is to make
:>a fool of it's self. With an obsession with perverts and goats, where it
:>writes via remailers, and cross posts to other perverts to no one's
:>surprise. With extreme jealous ranting over my documents, possessions,
:>successes, manliness and super Southern California surfing body, beard, and
:>loving family. Committing forgery over many of them proving I'm a
:>responsible American man. You remind me of a little rat dog, like a Mexican
:>Chiwawa with it's senseless barking, me too, me too. You're even more senile
:>than I first thought. And the poor thing, you're too girlie to take
:>responsibility for yourself again, by signing your statement like a man.
:> That really thinks the group's members are so stupid not to know it's
:>the same coward, posting over and over again using schizophrenic psychopath
:>forged up names???????
:> You're not worth any more time when a cut and paste this same paragraph
:>it fits so well!
:> But, now worth a forwarding to:
,
,
, , ,

:> God Bless America, Bill O|||||||O
http://www.billhughes.com/
:>
:>
:>"Sam Simian" > wrote in message
:>news:k1hei.42756$1i1.4043@pd7urf3no...
:>>
:>> I'm not surprised at all, but I really don't wanna know the details of how
:>> exactly you use it. Well, whatever turns you on, I suppose.
:>>
:>> Just don't use your utensils of mass-disgustion on any of those poor
:>> monkeys you suddenly have the hots for.
  #8  
Old June 21st 07, 12:37 AM posted to rec.autos.makers.jeep+willys
L.W. \(Bill\) Hughes III
external usenet poster
 
Posts: 3,245
Default 97XJ Dana 30 Ball Joint remove/replace

There you go again, the little jealous, REALLY JEALOUS, over the fact
that I once own a '37 Lasalle, ranting over my documents, possessions,
successes, manliness, Super Southern California surfing body, family, and
name. What a jealous little draft dodging senile coward from Navarre,
Florida, that of course, doesn't have a DD214, it had to have served our
country for that. Who's only way to get attention is to make a fool of its
self, with its goat obsession/fetish, where it writes via remailers, to no
one's surprise. Like when the other kids laughed at its attempt to use foul
language in elementary school play grounds, but its just gibberish. Too
senile to remember what he last wrote, like the rest of Florida. You remind
me of a little rat dog, like a Mexican Chiwawa with its senseless barking
it's rabid head off, me too, me too. And is too afraid to use your name,
address, or even sign your statement as any man would, totally worthless!
Posted pornography at:
As a member of the moral majority I know what porn is when I see it!
But now worth the time to forward this low life to: ,
, , , ,
for forgery.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


"24BitŪ" > wrote in message
...
><snip queer fantasies over my body, and the jealous senile babbling over my

accomplishments and conquests>



--
Posted via a free Usenet account from http://www.teranews.com

  #9  
Old June 21st 07, 12:38 AM posted to rec.autos.makers.jeep+willys
L.W. \(Bill\) Hughes III
external usenet poster
 
Posts: 3,245
Default 97XJ Dana 30 Ball Joint remove/replace

There you go again, the little jealous, REALLY JEALOUS, over the fact
that I once own a '37 Lasalle, ranting over my documents, possessions,
successes, manliness, Super Southern California surfing body, family, and
name. What a jealous little draft dodging senile coward from Navarre,
Florida, that of course, doesn't have a DD214, it had to have served our
country for that. Who's only way to get attention is to make a fool of its
self, with its goat obsession/fetish, where it writes via remailers, to no
one's surprise. Like when the other kids laughed at its attempt to use foul
language in elementary school play grounds, but its just gibberish. Too
senile to remember what he last wrote, like the rest of Florida. You remind
me of a little rat dog, like a Mexican Chiwawa with its senseless barking
it's rabid head off, me too, me too. And is too afraid to use your name,
address, or even sign your statement as any man would, totally worthless!
Posted pornography at:
As a member of the moral majority I know what porn is when I see it!
But now worth the time to forward this low life to: ,
, , , ,
for forgery.
God Bless America, Bill O|||||||O
http://www.billhughes.com/


"24BitŪ" > wrote in message
...
><snip queer fantasies over my body, and the jealous senile babbling over my

accomplishments and conquests>



--
Posted via a free Usenet account from http://www.teranews.com

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ball Joint differences in Spicer/Dana axle Question. Mike Romain Jeep 10 July 11th 06 02:50 PM
97 xj Ball Joint MJG Jeep 6 March 29th 06 01:49 AM
how to replace a ball joint mike113 Chrysler 2 February 11th 05 12:00 AM
Golf 3 - How to replace lower ball joint Sasso VW water cooled 1 November 13th 04 11:40 PM
Ball Joint on Ion teem Saturn 0 June 25th 04 01:31 AM


All times are GMT +1. The time now is 05:31 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright Đ2004-2024 AutoBanter.
The comments are property of their posters.