A Cars forum. AutoBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AutoBanter forum » Auto makers » Corvette
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Replace all injectors



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old November 3rd 04, 07:43 PM
Empty3
external usenet poster
 
Posts: n/a
Default


"John Smith" > wrote in message
...
> Are the injectors leaking? Check them with a fuel pressure gauge. Cost
> about $35 dollars at the part store. It is probably not the injectors.


I don't believe they are leaking, but its going to another shop tomorrow
morning.


> Have you done a tune up? Change the plugs, cap, rotor and wires. Buy
> Berrymans B12 injector cleaner and fill up the tank with high test.
> Also, change the PCV valve. Also, change the fuel filter and air
> filter. Now, take the car out for a banzai run and blow the carbon out
> of it. With the car hot, like right after you have run it go back and
> get the smog guy to check it again. You should pass. This assumes you
> do not have any codes set and the electronics are working correctly.


Not really had a tune up, but did change out the distributor system and
wires.
I'm looking to do a fuel injection cleaning first and try everything else
you just
mentioned (though car is running smooth).

Thanks!

>
> Empty3 wrote:
>
> > Hi All,
> >
> > I had posted that my 90 Vette failed emissions (freaking Houston), and

it
> > all points to one fuel injector.
> > The question is, should I go ahead a replace all injectors since the top

of
> > the engine will be torn apart and
> > I'll get hit with $500 in labor (no matter what).
> >
> > I'm thinking yes, but am also miffed about the cost of the injectors

(about
> > $100 each, does this sound right?).
> > Total estimated cost 500 labor, 800 injectors and about 50 (for gaskets

and
> > seals) -- 1350!
> >
> > Empty3
> >
> >
> >
> >
> >

>



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1980 733i - opening up dash to replace lights? Mark BMW 4 January 18th 05 08:40 PM
Need help to replace thermostat on 1993 325i sedan Lyle_s BMW 7 December 31st 04 10:30 AM
A6 2.5TDI Smoking + ultrasonically cleaning injectors AstraVanMan Audi 22 October 13th 04 08:06 PM
replace radiator with transmission? GBannish Corvette 2 September 19th 04 03:09 PM


All times are GMT +1. The time now is 04:47 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AutoBanter.
The comments are property of their posters.