If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
YJ spings
Jeep in question is an 89 YJ SOA, 1"shackle lift, stock axles, 33x12.5's.
Softtop, half doors. 95K miles. We all knew that when I went SOA, I would destroy my stock spring packs. They were pretty much toast before I started, so I picked up another complete set. I am about to get my hands on another good set. The set I have yet to get apparently has all perfect main leafs. The extra set I all ready have has all "decent" main leafs. My plan is to cut the spring eyes off of the main leafs from the first set of spares, and add those main leafs to the second set of stock spring packs. This would result in a 6-leaf pack. The extra main is to help fight spring wrap and sagging. I also need to get longer bumpstops. Will the added main do the trick? I was checking out my stock packs today.. the front only have 4 leafs, and the rear has 5. The first used set I have are all 5 leaf packs. I need to gain a tiny amount of clearance on the passenger front for the drag link below the spring. Can I cut one of the small bottom leafs to the legnth of the spring perch and add it to the packs to accomplish this? Will it stiffen the packs? Can I use two of the above to gain a little height in the rear (I don't like the sagging rear look). I would just switch the front and rear packs, but I don't know which are which. As an alternative, I have considered buying Rubicon 1.5" SOA lift springs.. but I think it is too late for that without buying a new rear driveshaft, re-setting my pinion angle, and re-doing the front end. Is it too late for those springs? How about the no-lift SOA springs? Are they worth "spring-ing" (ha ha) for? Carl |
Ads |
#2
|
|||
|
|||
One more thing I forgot to mention.. A friend mentioned that I could get
more flex if I cut the spring clamps off. Is this true? Won't this allow the springs to slide laterally? Carl "Carl Saiyed" > wrote in message ... > Jeep in question is an 89 YJ SOA, 1"shackle lift, stock axles, 33x12.5's. > Softtop, half doors. 95K miles. > > We all knew that when I went SOA, I would destroy my stock spring packs. > They were pretty much toast before I started, so I picked up another > complete set. I am about to get my hands on another good set. The set I have > yet to get apparently has all perfect main leafs. The extra set I all ready > have has all "decent" main leafs. My plan is to cut the spring eyes off of > the main leafs from the first set of spares, and add those main leafs to the > second set of stock spring packs. This would result in a 6-leaf pack. > > The extra main is to help fight spring wrap and sagging. I also need to get > longer bumpstops. Will the added main do the trick? > > I was checking out my stock packs today.. the front only have 4 leafs, and > the rear has 5. The first used set I have are all 5 leaf packs. I need to > gain a tiny amount of clearance on the passenger front for the drag link > below the spring. Can I cut one of the small bottom leafs to the legnth of > the spring perch and add it to the packs to accomplish this? Will it stiffen > the packs? Can I use two of the above to gain a little height in the rear (I > don't like the sagging rear look). I would just switch the front and rear > packs, but I don't know which are which. > > As an alternative, I have considered buying Rubicon 1.5" SOA lift springs.. > but I think it is too late for that without buying a new rear driveshaft, > re-setting my pinion angle, and re-doing the front end. Is it too late for > those springs? How about the no-lift SOA springs? Are they worth > "spring-ing" (ha ha) for? > > Carl > > > |
#3
|
|||
|
|||
Take a look at this website.
http://www.rocklizardfabrications.co...dget_boost.htm "Carl Saiyed" > wrote in message ... > Jeep in question is an 89 YJ SOA, 1"shackle lift, stock axles, 33x12.5's. > Softtop, half doors. 95K miles. > > We all knew that when I went SOA, I would destroy my stock spring packs. > They were pretty much toast before I started, so I picked up another > complete set. I am about to get my hands on another good set. The set I > have > yet to get apparently has all perfect main leafs. The extra set I all > ready > have has all "decent" main leafs. My plan is to cut the spring eyes off of > the main leafs from the first set of spares, and add those main leafs to > the > second set of stock spring packs. This would result in a 6-leaf pack. > > The extra main is to help fight spring wrap and sagging. I also need to > get > longer bumpstops. Will the added main do the trick? > > I was checking out my stock packs today.. the front only have 4 leafs, and > the rear has 5. The first used set I have are all 5 leaf packs. I need to > gain a tiny amount of clearance on the passenger front for the drag link > below the spring. Can I cut one of the small bottom leafs to the legnth of > the spring perch and add it to the packs to accomplish this? Will it > stiffen > the packs? Can I use two of the above to gain a little height in the rear > (I > don't like the sagging rear look). I would just switch the front and rear > packs, but I don't know which are which. > > As an alternative, I have considered buying Rubicon 1.5" SOA lift > springs.. > but I think it is too late for that without buying a new rear driveshaft, > re-setting my pinion angle, and re-doing the front end. Is it too late for > those springs? How about the no-lift SOA springs? Are they worth > "spring-ing" (ha ha) for? > > Carl > > > |
#4
|
|||
|
|||
Yup, but it begin to bounce like a TJ:
http://www.billhughes.com/bouncingFord.jpg God Bless America, ßill O|||||||O Carl Saiyed wrote: > > One more thing I forgot to mention.. A friend mentioned that I could get > more flex if I cut the spring clamps off. Is this true? Won't this allow the > springs to slide laterally? > > Carl |
Thread Tools | |
Display Modes | |
|
|