If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
putting on new Robbins top
My husband and I are putting on a new Robbins top, and are stumped. The
cable for our old top was NOT THERE on either side when we took it apart (previous owner), and we're putting on new cables. So, before we commit and rivet them in place, should they be top up, with curved metal underneath? Or should they be facing up with the curved metal facing the sky? |
Ads |
#2
|
|||
|
|||
"Lisa" > wrote:
>My husband and I are putting on a new Robbins top, and are stumped. The >cable for our old top was NOT THERE on either side when we took it apart >(previous owner), and we're putting on new cables. So, before we commit and >rivet them in place, should they be top up, with curved metal underneath? Or >should they be facing up with the curved metal facing the sky? I assume you mean the springs? The link below has some pictures of them. http://www.bigbendmiataclub.org/bigb...index.htm#pics Leon -- Leon van Dommelen Bozo, the White 96 Sebring Miata .) http://www.dommelen.net/miata EXIT THE INTERSTATES (Jamie Jensen) |
#3
|
|||
|
|||
Well, the springs are pretty easy to figure out... what we're having
problems with is the other end of the cable... the end that rivets. it's a square of metal with the cable coming out of one side, not one end. Should the cable be coming out of the side towards the middle of the car? Or towards the nearest window? "Leon van Dommelen" > wrote in message ... > "Lisa" > wrote: > > >My husband and I are putting on a new Robbins top, and are stumped. The > >cable for our old top was NOT THERE on either side when we took it apart > >(previous owner), and we're putting on new cables. So, before we commit and > >rivet them in place, should they be top up, with curved metal underneath? Or > >should they be facing up with the curved metal facing the sky? > > I assume you mean the springs? The link below has some pictures of them. > > http://www.bigbendmiataclub.org/bigb...index.htm#pics > > Leon > > -- > Leon van Dommelen Bozo, the White 96 Sebring Miata .) > http://www.dommelen.net/miata > EXIT THE INTERSTATES (Jamie Jensen) |
#4
|
|||
|
|||
"Lisa" > wrote:
>Well, the springs are pretty easy to figure out... what we're having >problems with is the other end of the cable... the end that rivets. it's a >square of metal with the cable coming out of one side, not one end. Should >the cable be coming out of the side towards the middle of the car? Or >towards the nearest window? I am confused. Isn't that what http://www.bigbendmiataclub.org/bigb...2/aut_7965.htm shows? Leon >"Leon van Dommelen" > wrote in message .. . >> "Lisa" > wrote: >> >> >My husband and I are putting on a new Robbins top, and are stumped. The >> >cable for our old top was NOT THERE on either side when we took it apart >> >(previous owner), and we're putting on new cables. So, before we commit >and >> >rivet them in place, should they be top up, with curved metal underneath? >Or >> >should they be facing up with the curved metal facing the sky? >> >> I assume you mean the springs? The link below has some pictures of them. >> >> http://www.bigbendmiataclub.org/bigb...index.htm#pics >> >> Leon >> >> -- >> Leon van Dommelen Bozo, the White 96 Sebring Miata .) >> http://www.dommelen.net/miata >> EXIT THE INTERSTATES (Jamie Jensen) > -- Leon van Dommelen Bozo, the White 96 Sebring Miata .) http://www.dommelen.net/miata EXIT THE INTERSTATES (Jamie Jensen) |
#5
|
|||
|
|||
Toward the window. Placing it the other way puts the cable too high up on
the top and doesn't pull the edge of the top down over the window gaskets. Don't ask me how I know, or what size pop-rivets to buy at Lowes late at night to replace the two used ones provided with the top. -- Ken Lyons '97 Brilliant Black/'90 Classic Red Inside the Beltway [Remove the first two digits to reply] "Lisa" > wrote in message . .. > Well, the springs are pretty easy to figure out... what we're having > problems with is the other end of the cable... the end that rivets. it's a > square of metal with the cable coming out of one side, not one end. Should > the cable be coming out of the side towards the middle of the car? Or > towards the nearest window? > > "Leon van Dommelen" > wrote in message > ... > > "Lisa" > wrote: > > > > >My husband and I are putting on a new Robbins top, and are stumped. The > > >cable for our old top was NOT THERE on either side when we took it apart > > >(previous owner), and we're putting on new cables. So, before we commit > and > > >rivet them in place, should they be top up, with curved metal underneath? > Or > > >should they be facing up with the curved metal facing the sky? > > > > I assume you mean the springs? The link below has some pictures of them. > > > > http://www.bigbendmiataclub.org/bigb...index.htm#pics > > > > Leon > > > > -- > > Leon van Dommelen Bozo, the White 96 Sebring Miata .) > > http://www.dommelen.net/miata > > EXIT THE INTERSTATES (Jamie Jensen) > > |
#6
|
|||
|
|||
The rivets are 5/32.
Thanks! "Ken Lyons" > wrote in message news:tAyGe.1500$S%5.962@trnddc06... > Toward the window. Placing it the other way puts the cable too high up on > the top and doesn't pull the edge of the top down over the window gaskets. > > Don't ask me how I know, or what size pop-rivets to buy at Lowes late at > night to replace the two used ones provided with the top. > -- > Ken Lyons '97 Brilliant Black/'90 Classic Red > Inside the Beltway > [Remove the first two digits to reply] > "Lisa" > wrote in message > . .. > > Well, the springs are pretty easy to figure out... what we're having > > problems with is the other end of the cable... the end that rivets. it's a > > square of metal with the cable coming out of one side, not one end. Should > > the cable be coming out of the side towards the middle of the car? Or > > towards the nearest window? > > > > "Leon van Dommelen" > wrote in message > > ... > > > "Lisa" > wrote: > > > > > > >My husband and I are putting on a new Robbins top, and are stumped. The > > > >cable for our old top was NOT THERE on either side when we took it > apart > > > >(previous owner), and we're putting on new cables. So, before we commit > > and > > > >rivet them in place, should they be top up, with curved metal > underneath? > > Or > > > >should they be facing up with the curved metal facing the sky? > > > > > > I assume you mean the springs? The link below has some pictures of > them. > > > > > > http://www.bigbendmiataclub.org/bigb...index.htm#pics > > > > > > Leon > > > > > > -- > > > Leon van Dommelen Bozo, the White 96 Sebring Miata .) > > > http://www.dommelen.net/miata > > > EXIT THE INTERSTATES (Jamie Jensen) > > > > > > |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Russell Weller, Meet Peter Robbins | Laura Bush murdered her boy friend | Driving | 1 | June 14th 05 01:24 AM |
Will putting sandbags in the trunk help? | Cartrivision1 | Driving | 12 | March 17th 05 08:27 PM |
putting cd player in 91 explorer | [email protected] | Ford Explorer | 2 | January 27th 05 08:29 PM |
Putting things in perspective | aRKay | Corvette | 4 | October 1st 04 12:43 AM |